I hope you are not chopping up decent white battery cups
right now I'm using a set that have the ends cut off-- it requires using Velcro on the bottom to keep it from sliding out of the boxes...
I'm considering fabricating some new ends out of aluminum that will attach to the cut nylon boxes, or fabricating entirely new aluminum ones.
Asso_man! wrote:only the B and C chassies were drilled to mount the battery lenghtwise
Then why are the holes even there? Are they for something else?
agreed-- why are the holes there? After all, they line up perfectly with the battery boxes. The only thing i can think of is that a 6 cell 'hump' pack might have worked...
Hey all,
Have used a set of calipers to measure the battery box within about half a mil
134.5mm x 47mm x 24mm
1) Has anyone found any lipo packs that fit?
Prefer hardpack/ROAR approved, but they all seem to be too big?
Yeah Racing 4000mah LP0042...
Last post
In my Pro SE I took my Losi hinged battery bar/box out of the front and replaced it with a Velcro batter strap (i used the same coutnersunk screws and put a hole in the velcro strap then used a washer and a nut on each side, and now combined with...
I won a RPM battery box off of the bay..it was NIB (part number 7050). I thought it would be just a simple bolt on, but it came with a nail and a spacer. The problem is I cant read the little instructions sheet that it came with because its so...
Last post
Unfortunately, this was a universal battery box...so the chassis had to be modified.
I have a new jrx2 chassis and I didn't want to drill 2 exta holes, so instead, I modified the battery box. I cut the center section just enough to use the...
Is there a reason im seeing b stamp black chassis with the battery box offset from center, only 2 so far,lol but still is it a cowinky-dink or for a real reason
Last post
Taken from the instructions
Perfect your the balls, that’s exactly what i wanted just so when i install people aren’t saying looking st this idiot haha
Im cru jones on Facebook im sure youve answered my many ?’s in last to weeks
does something like this exist? the stock battery hold down system on my hpi rs4 is too small for modern lipos.
I was think of using something like this:
and just servo taping it to the chassis. but then I realize that the battery needs to be...
Last post
I'd rather spend the 15 bucks on a new battery hold down system that can accommodate a larger variety of batteries than the 60 or so for new batteries just for a specific car.
Makes sense, I've just never looked at it that way, since I have to...
Is there one? I got the one that was recommended in my thread, and I'm having to make some way to hold it in, because I eventually BUTCHERED my box until there was nothing left but the sides :(
Last post
OK, thank you
I am looking at battery straps now! I like that idea
Hi, this is my first post at RC10Talk :-) I have been on R/C's my hole live. My firsy R/C was a grasshopper back in 86-87. I have so many that my wife is jealous and i use the 3rd room of my house as a R/C & Computer room. OK here is my problem, i...
Last post
Sorry scr8p. Warning duelly noted. I should have PM'd him.
this was just put on golden years rc facebook page. romulus just received some nice pre-photos of the rc10 graphite box art car from the photographer that worked with chris chan. looks like they didn't settle with this body and did another for the...
Last post
looks mean in the last pick ... cool picts .. ive never seen the before edit shots
What are the best ni-mh packs to use these days? I heard venom packs are garbage, but every time I'm at the hobby shop the guy is trying to sell me a venom.
Last post
I've learned that you get what you pay for. Spend just a little more and be happier down the road. There is a limit though, don't buy crazy money packs if you aren't planning on racing on a high level. I always find the middle of the road...