Lipo that fits a stock battery box

Moderators: scr8p, klavy69

3 posts • Page 1 of 1

nufnuffz28: Approved Member; Posts: 50; Joined: Wed Jan 15, 2014 10:22 am; Location: North Carolina, US

Lipo that fits a stock battery box

Quote

Post by nufnuffz28 » Tue Jun 24, 2014 1:31 pm

Is there one? I got the one that was recommended in my thread, and I'm having to make some way to hold it in, because I eventually BUTCHERED my box until there was nothing left but the sides

knucklebuster: Approved Member; Posts: 822; Joined: Mon Aug 07, 2006 11:05 pm; Location: Florida

Re: Lipo that fits a stock battery box

Quote

Post by knucklebuster » Tue Jun 24, 2014 6:30 pm

I use the Nanotech 5800mah lipo. The battery barely fits in the old stock rear bulkhead. You will need to modify the front battery tray. You will probably also need to remove the ear on a standard size servo closest to the battery tray. Many also use the shorty lipo which requires a B4 or similar style battery strap.

nufnuffz28: Approved Member; Posts: 50; Joined: Wed Jan 15, 2014 10:22 am; Location: North Carolina, US

Re: Lipo that fits a stock battery box

Quote

Post by nufnuffz28 » Thu Jun 26, 2014 3:13 pm

OK, thank you

I am looking at battery straps now! I like that idea

Post Reply

3 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

JRX Pro battery box and Lipo and modern battery options?

Last post by SoloGraphix « Mon Aug 31, 2009 2:17 pm
Posted in Losi Forum
Replies: 8
by Keyz » Mon Apr 27, 2009 5:45 am » in Losi Forum

First post

Hey all,
Have used a set of calipers to measure the battery box within about half a mil

134.5mm x 47mm x 24mm

1) Has anyone found any lipo packs that fit?

Prefer hardpack/ROAR approved, but they all seem to be too big?

Yeah Racing 4000mah LP0042...

Last post

In my Pro SE I took my Losi hinged battery bar/box out of the front and replaced it with a Velcro batter strap (i used the same coutnersunk screws and put a hole in the velcro strap then used a washer and a nut on each side, and now combined with...

8 Replies

1411 Views

Last post by SoloGraphix
Mon Aug 31, 2009 2:17 pm
Is there a 3S lipo that fits nice in the rc10 worlds re re?

Last post by Dadio « Thu Aug 01, 2019 8:08 am
Posted in Modern Electronics
Replies: 8
by Showcase1186 » Mon Sep 11, 2017 6:48 pm » in Modern Electronics

First post

Thanks for your help in advance. I've done a search on here with limited luck on here. Is there a 3S lipo that will fit the rc10 worlds car re release without hacking up the battery cups?

Thanks for any help!!!

Last post

At the very least your gunna need about 2lbs weight on the front end to stop it lifting the front wheels ! , a good 2s hight C rating race pack is plenty , if you want to go nuts stick a 7.5t or 6.5t brushless motor in it and that's probably still...

8 Replies

2501 Views

Last post by Dadio
Thu Aug 01, 2019 8:08 am
Battery option for stock gold pan battery cup?

Last post by Lonestar « Wed Jul 06, 2011 4:22 am
Posted in RC10 Buggy Forum
Replies: 17
by RCveteran » Fri Oct 15, 2010 1:45 pm » in RC10 Buggy Forum
1

2
First post

I am finishing up my RC10CE driver project and realized none of my batteries fit. Anyone have a LIPO that fits this set up? I am thinking a soft case would do it but I'd rather stay hard case for Lipo if possible. Or at least a decent 6 cell NIMH,...

Last post

you can Drill, countersink, cut servo tabs and mount servo with forward mount only + servo tape - it takes 5mns, you just need a drill and a countersinking bit, it doesn't have to be super accurate, heck, even I with my 2 left hands did it properly...
17 Replies

2986 Views

Last post by Lonestar
Wed Jul 06, 2011 4:22 am
RC10T with T3 body, it fits, it fits!!!!!

Last post by tecnica2001 « Wed Aug 06, 2008 10:13 pm
Posted in RC10 Truck Forum

by tecnica2001 » Wed Aug 06, 2008 10:13 pm » in RC10 Truck Forum

I got this truck in an RC lot, it's in good condition, the under side of the chassis is scratched up, so it would make an awesome basher, I mounted up some wheels and tires, dusted it off, and oh yeah, mounted an RC10T3 original body that I had...

0 Replies

938 Views

Last post by tecnica2001
Wed Aug 06, 2008 10:13 pm
Old ESC with Lipo battery

Last post by slotcarrod « Thu Jul 28, 2011 3:05 pm
Posted in Vintage Electronics
Replies: 7
by Momo5 » Wed Jul 20, 2011 4:56 pm » in Vintage Electronics

First post

I've been looking for an old school Tekin 410K esc for a while now and finally found one. I just realized that all I have are lipo batteries. Is there anything I can buy, like something that would go between the esc and battery that would give me...

Last post

I run lipo's with all my old esc's. No problem! As long as you stop running as soon as you notice a voltage drop, you will be fine. I have never seen any of my packs under 6 volts. With lipo's 3 volts per cell is your lower voltage limit! 2 cell...

7 Replies

1782 Views

Last post by slotcarrod
Thu Jul 28, 2011 3:05 pm
Lipo Battery Question

Last post by Brandon G « Wed Nov 07, 2007 8:17 am
Posted in Modern Electronics
Replies: 12
by mikedealer » Mon Nov 05, 2007 10:23 am » in Modern Electronics

First post

im in the market finally for a speed controller and Lipo Battery to complete one of my cars.. i settled for a tekin fx-pro, and now am trying to find a lipo battery

i would like to have something more than 3000mah capacity, and would like to to fit...

Last post

I highly advise balancing once a night while racing. These things are too expensive not to.

Only reason, I saw a $130 pack about 2 weeks old swell and crap out because of lack of balancing. Not an abused pack either. It was in the care of one of...

12 Replies

1890 Views

Last post by Brandon G
Wed Nov 07, 2007 8:17 am
LiPo Battery Prices Going Up???

Last post by Charlie don't surf « Thu Jul 28, 2011 1:00 pm
Posted in Off-Topic / Chit-Chat
Replies: 5
by Dirtdiver » Thu Jul 28, 2011 9:58 am » in Off-Topic / Chit-Chat

First post

An Asiana Cargo plane went missing today off the coast of South Korea. A portion of the cargo contained LiPo batteries.

A recent article found on relating to LiPo batteries

FAA issues safety alert on lithium batteries after UPS crash
By Stephen...

Last post

Very true about the comparison, but I guess I was speaking about the regions products as a whole. And I don't want to forget that the worst aspect of this incident is the loss of the crew- but I have had early gen soft case lipos that are still fine...

5 Replies

831 Views

Last post by Charlie don't surf
Thu Jul 28, 2011 1:00 pm
Lipo battery info request

Last post by justinspeed79 « Sun Jul 13, 2008 10:53 pm
Posted in Modern Electronics
Replies: 25
by klavy69 » Thu Jul 10, 2008 4:07 am » in Modern Electronics
1

2
First post

OK, decided to actually finish one of my projects( :lol: ) but need to pick up some stuff and think I want to go lipo battery powered with it. Its a traxxas velineon bl setup on this ride(I know, I know...was a good deal at the time) and don't know...

Last post

The higher the C rating the more amps the cell will put out. 1 C is 10 times the ah of the cell.

Just to clarify as I'm not sure this wasn't a typo. I was under the impression that 1C is 1 times the amp hour rating of the cell, this is important...
25 Replies

2095 Views

Last post by justinspeed79
Sun Jul 13, 2008 10:53 pm

Return to “RC10 Truck Forum”

Who is online

Users browsing this forum: No registered users and 24 guests

Lipo that fits a stock battery box

Lipo that fits a stock battery box

Re: Lipo that fits a stock battery box

Re: Lipo that fits a stock battery box

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online

Login Register