I bought an RC10 a long time ago, played with it for awhile and then forgot about it. It got unearthed again while cleaning the basement and other than a battery that leaked in the remote, all was good and I started playing with it again with my...
Last post
Swung by my local shop to get some help figuring out what my next car (truck) will be and a new spur and some fuel line (what they recommended over springs for the dogbones) was only $8 (I'd forgotten how these things nip you to death...).
I have an RC10 B3 with a stealth transmission. Installed a brushless system and the transmission slips bad. I tightened the slipper clutch all the way and it still slips.
With the slipper fully tightened and holding both wheels down, i can turn the...
Last post
It was the differential slipping. I removed the rear right wheel, tightened it up a bit then backed off. Works! Now gotta work on the good pan
I am converting a black tub rc10t to brushless and I am attempting to do the b4.1 shaft conversion.
I am having a problem with the shaft getting tight. The transmission spins finer until I put the tensioning spring and nut on the spur gear.
A soon...
Last post
I removed the spacer and it worked perfectly. The spur ended up being close to the motor plate but not touching.
Thanks for all the help.
After locating a used upper shaft for mounting the hydra unit on a stealth trans, I'm having having a problem after the complete unit is installed and going to put the rpm gear cover on( cover hits the unit). I knew there was a problem as soon as I...
Last post
Whoa...first of all what is a Hydra drive and how does it improve your tranny?
It’s like a lock up torque converter from a full size automatic transmission. The interior rotor and the housing have vanes and it’s filled with thick shock fluid. It...
I got several Stealth gear boxes myself..........I noticed 4 out of 5 have a small slit at the bottom side of the gear box ........which potentially will have dirt going in .........is it a defect or the factory intentionally making such a design...
