THE H.P FREAK wrote:HI!... I just finished building my RC10 Classic and i had only one issue. That was that both body mount posts were 1/2 inch too short. I just used two longer vintage RC10 ones i had here. Besides that mine went together perfectly. Everything fit snug , no parts missing, all the holes were countersunk and the chassis was straight. Very happy with mine.
Curious what internal shock spacers you used for the shocks? The directions called for two thin black spacers and don't provide adequate stoppage.
THE H.P FREAK wrote:HI!... I just finished building my RC10 Classic and i had only one issue. That was that both body mount posts were 1/2 inch too short. I just used two longer vintage RC10 ones i had here. Besides that mine went together perfectly. Everything fit snug , no parts missing, all the holes were countersunk and the chassis was straight. Very happy with mine.
Curious what internal shock spacers you used for the shocks? The directions called for two thin black spacers and don't provide adequate stoppage.
HI!... Thats all i used. Seems to work fine. But mine is a shelf queen, so no worries.
THE H.P FREAK wrote:HI!... I just finished building my RC10 Classic and i had only one issue. That was that both body mount posts were 1/2 inch too short. I just used two longer vintage RC10 ones i had here. Besides that mine went together perfectly. Everything fit snug , no parts missing, all the holes were countersunk and the chassis was straight. Very happy with mine.
Curious what internal shock spacers you used for the shocks? The directions called for two thin black spacers and don't provide adequate stoppage.
HI!... Thats all i used. Seems to work fine. But mine is a shelf queen, so no worries.
Sounds good, just wanted to make sure you were aware....I too have not had much issues with mine. I'm just excited to be able to build a new kit out of the box instead of the usual second, third hand owner rigs...
THE H.P FREAK wrote:HI!... I just finished building my RC10 Classic and i had only one issue. That was that both body mount posts were 1/2 inch too short. I just used two longer vintage RC10 ones i had here. Besides that mine went together perfectly. Everything fit snug , no parts missing, all the holes were countersunk and the chassis was straight. Very happy with mine.
Curious what internal shock spacers you used for the shocks? The directions called for two thin black spacers and don't provide adequate stoppage.
This is just a tip absent in the instructions. Drag out a Cadillac manual and you will see a 1/8 x 5/8 (L) section of Silicone fuel tubing used on the shaft of the rear shock under the piston. (there is a photo) This is a nice internal downstop. I figured this out on Saturday. Interestingly enough the Edinger manual had no mention of this. I cant recall what we did in 84.
I had no real issues with mine except for little exclusions like this in the instructions. No Worries!
While I have 4 others on the bench ready to go together that I am completing the gathering process for, the only 2 RC10 kits I have built were the original in 84 and this re release.
The only modification I made to my re re was to add the 2nd lower set of shock holes in the front shock tower.
I am happy with mine and am 50% through the assembly on a 2nd one with no issues.
Hey quit giving them ideas! Sour grapes anno was my next color
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Y'ernat Al wrote:I'm looking forward to mine, and will be perfectly fine with a 30 year design requiring the same extra effort to get everything silky that it always had and always will. (...said a nostalgic buff on a nostalgic forum for a nostalgic model race car).
Hey Hoop...
well I give this whole statement a
Peace and professionlism.....Kabunga signing off!!!
gomachv wrote:I think this boils down to different expectations and while a lot of us are happy to have it in any form, others want it to have perfect fit and finish. Here's the thing about that...the people that are cool with it didn't design it, redesign it, and don't accept money from Team Associated to push its sales. We are all just enthusiasts. Complaining on a forum about it and dragging it on isn't going to get anywhere. If you have a legitimate issue the concerns should be taken up with Team Associated. We can't fix it for you here.
For all those that got their front end built and are giving up....Send it to me and ill finish it for ya. I ain't scared of filing, shimming, shaving, and drilling the occasional servo horn access hole
I agree. Overall, I'm thrilled to have a NIB gold pan in any form that I can assemble/run and consider the need to file/sand/ream a relatively minor issue. I was merely agreeing with those who initially expressed their displeasure with the imperfect fit/finish. I will enjoy the build but I'm sure I'll get a little annoyed if I have to wrestle with the parts to make them fit properly.
This thread made me LOL. I am so excited to have the re-re rc10 even with the minor imperfections. In reality, if AE made it perfect, you'd all complain they took away the "soul" of the original kit. We should be happy we even have the opportunity to build a new rc10 kit in 2013 instead of nothing at all. Ah...just fell off my soapbox.
I forgot, I had to make the hole for the idler gear shaft a little bigger on the transmission spine with an xacto blade. *gasp*!
I really liked the Bigfoot 1 body that Traxxas released, but I immediately thought of putting it on the Super Clod, with the Bigfoot scheme, but decided to save the Bigfoot decals for a future Blackfoot.....
So I bought the body for the Stampede...
Last post
It’s been a while since I posted anything on this, so here it goes.
I’ve widened the front end with the RPM wide arm kit.
Hobbywing Brushless system.
And added a set of Jconcepts Midwest wheels and some Proline Destroyer 2.2 tires.
Jugging from the sun fade on the box, I'd say that it's 100% the same kit, I would leave it intact, but if it were an earlier kit, I would open her up....... Will not ship to Canada gets me every...
Hello All, new member checking in... here are two pictures of the RC10...
Last post
chamberlain, are you the chamberlain that took first place at the 89 roar off road nats in 2wd stock? i was looking through some old rcca's and happened to notice it. just thought i'd ask. :wink:
I got my Tamiya High Lift in today! This thing is pretty sweet! I can't wait to start building her! I need to buy a bearing kit for it first though! Heres a few pics!
Last post
That paint job turned out really nice. what colors did you use?