Associated Guy With Losi Cars = ?!?!?!

[ChisaiKuso]

I recently acquired six old school Losi buggies and enough spare parts to easily build a few more. My problem is that I've always raced only Team Associated cars and trucks except for a brief time when I did some prototype testing for BSR/Hyperdrive. My knowledge of Losi products is therefore very minimal. I'm not even sure that I can identify what all of these cars are.

I can certainly use Google and other search features as well as the next guy, but I'd rather start with some recommended sources of information from you guys. I want to completely rebuild all of these cars. It won't be difficult to clean them up since they are all in excellent condition, but I want to be sure that I am restoring them correctly as I go through them. Please help point me in the right direction.

[spydur23]

Pics?

[Charlie don't surf]

http://www.rc10talk.com/viewforum.php?f=27

[ChisaiKuso]

Pics?

Not yet, but I hope to have some soon.

[ChisaiKuso]

http://www.rc10talk.com/viewforum.php?f=27

LOL! That is rather obvious since I started this thread in the same place. Your point is valid though...

By the way, have you not been getting any of the PMs I send you? I know that you took a sabbatical from the forum for a while, but I still haven't heard back from you since your return. Please let me know.

[mytimac]

I know a little place that has lots of documentation and other guides if thats what you need.
http://vintagelosi.com

[ChisaiKuso]

I know a little place that has lots of documentation and other guides if thats what you need.
http://vintagelosi.com

Thanks! That is exactly what I need.

[Charlie don't surf]

http://www.rc10talk.com/viewforum.php?f=27

LOL! That is rather obvious since I started this thread in the same place. Your point is valid though...

By the way, have you not been getting any of the PMs I send you? I know that you took a sabbatical from the forum for a while, but I still haven't heard back from you since your return. Please let me know.

I don't think there is anything in my inbox, is there any sent msgs in your outbox, or sent messages marked read/unread?

[ChisaiKuso]

So far I believe that I have correctly identified the following cars as being complete:

-- Jrx2
-- Jrx2
-- Jrx2
-- Jrx2 (with 5-link suspension converted to H-arms)
-- Jrx-Pro
-- Junior 2

After studying the pictures and manuals on http://www.vintagelosi.com it seems that the Jrx-Pro is built on a Jrx2 chassis. Fortunately I found the correct Jrx-Pro chassis in one of the boxes of parts. Unfortunately it appears to have some extra holes drilled in it.

There are so many extra parts to go through that I barely know where to begin. This is definitely going to take some time (not that I'm complaining).

[ChisaiKuso]

I have questions about the various colored parts. In some of the boxes I've got lots of extra wheels, spur gears, bellcranks, and other parts that are red, orange, yellow, and white. Were these considered "optional" parts that could be used as replacements and/or to customize the buggies? If so, were they available during production of the Jrx2, or did they become available with the later cars?

[Charlie don't surf]

Your going to have to upload pics, too many variables, too many cars, too many versions to be able to "just say"

[GoMachV]

Early spurs were gray, when they started making a lot of different sizes they color coded them. Both non slipper and slipper or slipper and hydradrive

Bellcranks, original are black and thin to act as a servo saver. Early truck were white, iirc they were still thin to act as a saver. Orange came around later and was solid so you needed a servo saver.

So, as Reggie said....pics will help

[ChisaiKuso]

I don't think there is anything in my inbox, is there any sent msgs in your outbox, or sent messages marked read/unread?

I sent you another PM. Like all the others it showed in my outbox and then later was gone (presumably when you checked your new messages).

[ChisaiKuso]

Your going to have to upload pics, too many variables, too many cars, too many versions to be able to "just say"

I'm always slow at getting pictures posted. I'll see what I can do this coming week.

[ChisaiKuso]

Early spurs were gray, when they started making a lot of different sizes they color coded them. Both non slipper and slipper or slipper and hydradrive

Bellcranks, original are black and thin to act as a servo saver. Early truck were white, iirc they were still thin to act as a saver. Orange came around later and was solid so you needed a servo saver.

That's good information. Thanks.