Trying to find an original 10T manual

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Trying to find an original 10T manual

Post by Texas_Man2011 »

Is there anyway that I can find a 10T manual? I have searched online for them and haven't found one. I am wanting to restore mine and before I take it apart I want to make sure I can find a manual so that I can put it back together. any help would be appreciated. thanks
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

User avatar
GoMachV
Super Member
Posts: 11352
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 831 times
Been thanked: 2460 times

Re: Trying to find an original 10T manual

Post by GoMachV »

Team Associated has archives of most of the old manuals. Here is the link to the 10T related downloads:
http://www.teamassociated.com/manuals/RC10T/
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

Thanks for that.. now as far as finding parts if I need them, I think i will be screwed on trying to find them as they are 20+ yrs old. RPM doesn't have them anymore and there aren't that many on ebay either. is there any other kits like the GT or the GT2 that the parts will fit from besides the tranny. I think that i have the stealth tranny in both of the 10T's that I have but I am not sure
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

User avatar
GoMachV
Super Member
Posts: 11352
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 831 times
Been thanked: 2460 times

Re: Trying to find an original 10T manual

Post by GoMachV »

Gt uses a lot of the same. Suspension, shocks, shafts, etc
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

Here is what I have that I will be taking apart and making into one
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

how can i add pictures?
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

User avatar
GoMachV
Super Member
Posts: 11352
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 831 times
Been thanked: 2460 times

Re: Trying to find an original 10T manual

Post by GoMachV »

They have to be small to host them here. I use photobucket
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

Sixtysixdeuce
Approved Member
Posts: 494
Joined: Tue Aug 20, 2013 1:07 am
Location: Elbert County, CO
Been thanked: 2 times

Re: Trying to find an original 10T manual

Post by Sixtysixdeuce »

is there any other kits like the GT or the GT2 that the parts will fit from besides the tranny.
Yes. All the suspension except for the rear arm mounts, rear bulk head and rear shock tower are common between the T & GT. Axles are also compatible, as are diff parts except for the gear & rings (larger on GT). RPM arms labeled as GT will fit your T.

Rear arm mounts & bulkheads for the RC10 re-release will also fit your T. About the only things you can't readily find brand new right now are the black chassis tub, black motor mount, rear shock tower and transmission case. They are out there as NOS (new old stock), but $pendy.
"When you are dead, you do not know you are dead; It is difficult only for others. It is the same when you are stupid."

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

Image

Image

Image

Image

sorry for the dog in the background. she never misses for a photo op.. LOL

I think that both of these have the stealth trans in them but I am not sure
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

Sixtysixdeuce
Approved Member
Posts: 494
Joined: Tue Aug 20, 2013 1:07 am
Location: Elbert County, CO
Been thanked: 2 times

Re: Trying to find an original 10T manual

Post by Sixtysixdeuce »

Put image tags (Image
"When you are dead, you do not know you are dead; It is difficult only for others. It is the same when you are stupid."

SteveK
Approved Member
Posts: 748
Joined: Wed Aug 26, 2009 3:43 pm
Location: Syracuse, NY
Has thanked: 1 time
Been thanked: 2 times

Re: Trying to find an original 10T manual

Post by SteveK »

It looks like everything is accounted for, except for the rear shocks. Just strip it down and clean it and take stock of what you have. Are you going to restore it or get it running?

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

I planned on doing both. I really want to restore it because of childhood memories but I would like to take it to a track every now and then
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

Texas_Man2011
Approved Member
Posts: 29
Joined: Wed Dec 25, 2013 8:19 pm
Location: Corinth, TX
Been thanked: 1 time

Re: Trying to find an original 10T manual

Post by Texas_Man2011 »

can i use the rc10t4 parts to complete my 10t?
RC10L: ALL ORIGINAL
OFNA LX2 NITRO BB .28 ENGINE
ECX CIRCUIT: 130A ESC AND A 6000KV MOTOR

User avatar
GoMachV
Super Member
Posts: 11352
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 831 times
Been thanked: 2460 times

Re: Trying to find an original 10T manual

Post by GoMachV »

Not many!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

FarmerDowns
Regular Member
Posts: 5
Joined: Sun May 23, 2021 12:22 am
Has thanked: 4 times

Re: Trying to find an original 10T manual

Post by FarmerDowns »

Did you find a manual?

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “RC10 Truck Forum”

Who is online

Users browsing this forum: No registered users and 4 guests