Charlie don't surf wrote:The only electric RC10 version that came with white 3 deg mounts was the 7035 RC10T Team Truck.
Do you have a pic of what the white ones that came on the 7035 10T looked like?
There are some that are marked 3* on the header, and are squared...but they are three degrees in totality, since there is a left 1.5* and a right 1.5* in the package.
I can attest to the white ones I have actually creating 3 degrees of toe per side using just the mount....not including any extra toe from the hub carrier.
As for the one's in the RCCA/Lett article, the 0 and 3 degree mounts share the same part numbers as the 0 and 3 degree blocks that the T2 blocks used so I will guess at them also giving the stated amount of toe to each side, and not being a cumulative toe measurement. I also base the guess on that there'd be no way to get 0 degree of total toe, for both sides, unless each side was a 0 degree block...or you mounted 1.5 degree carriers on the flipped sides.
All the white 0* were rounded off too.
Did you mean squared off? I've never seen a 0 degree block, white, black, or other, that was rounded on either side.