how hot of a motor can the rc10 classic take?
Re: how hot of a motor can the rc10 classic take?
The manual states that is can take up to 8.5 turn brushless. They do not recommend anything lower for the 6 gear tranny.
Re: how hot of a motor can the rc10 classic take?
The problem with the 6 gear is that you have to crank the diff nut down pretty tight so that it won't slip. I can't imagine the diff living long with a 8.5T. If I remember right, the mod motors of the day were 18-20 turn brushed.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
-
- Approved Member
- Posts: 1254
- Joined: Sun Mar 09, 2014 10:43 pm
- Location: peoples Republic of Australia
- Has thanked: 750 times
- Been thanked: 26 times
Re: how hot of a motor can the rc10 classic take?
Hi,
I wish someone had told me, about the 8.5 turn brushless limit.
I have been running my 6 gear with black idlers and RCCA bearing mod using a 6.5 turn brushless
setup on GT spec foam tires on the indoor track at the local hobby shop, no traction compound
though.
Cheers, Dave.
I wish someone had told me, about the 8.5 turn brushless limit.
I have been running my 6 gear with black idlers and RCCA bearing mod using a 6.5 turn brushless
setup on GT spec foam tires on the indoor track at the local hobby shop, no traction compound
though.
Cheers, Dave.
- JK Racing
- Super Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 200 times
Re: how hot of a motor can the rc10 classic take?
I ran 10-13 turn motors all the time in a 6 gear...with 6 cell NiMh batteries. Dirt oval
I have ran a traxxas VXL motor in a 6 gear recently...thing was ballistic. Had the diff locked though like Ryan said.
I have ran a traxxas VXL motor in a 6 gear recently...thing was ballistic. Had the diff locked though like Ryan said.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Re: how hot of a motor can the rc10 classic take?
Doink
Saw the reference to 8.5t as the fastest recommended motor in the manual. Thanks guys
The car is a rocket with 8.5t using the recommended pinion of 18t
Saw the reference to 8.5t as the fastest recommended motor in the manual. Thanks guys
The car is a rocket with 8.5t using the recommended pinion of 18t
- GoMachV
- Super Member
- Posts: 11333
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 824 times
- Been thanked: 2419 times
Re: how hot of a motor can the rc10 classic take?
well, if you had read the manual, it is there in print. This was just a recommendation, if you choose to exceed it then fine! Its not a rule. The gears are not meant to explode at a certain rpm. Im really sorry you feel let down, perhaps a message to Team Associated would be more appropriate though, since they are the ones issuing the recommendationDaveM wrote:Hi,
I wish someone had told me, about the 8.5 turn brushless limit.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 2375 Views
-
Last post by woodall01
-
- 26 Replies
- 1636 Views
-
Last post by campbuds
-
- 9 Replies
- 1496 Views
-
Last post by Kyoshojoe
-
- 16 Replies
- 2648 Views
-
Last post by filzemail
-
- 20 Replies
- 5069 Views
-
Last post by tecnica2001
-
- 9 Replies
- 3447 Views
-
Last post by WebSteve
-
- 2 Replies
- 1493 Views
-
Last post by mrduckz
-
- 114 Replies
- 28997 Views
-
Last post by klavy69
Who is online
Users browsing this forum: DotNetDotCom.org [Bot] and 11 guests