I think you should check out Vale's classified in the bst section; the A-mark tires he has look the same as the ones I have on my jelly bean rims. I did 2 passes with electrical tape on the mounting area and they seem just fine.
I have an electric converted rc10gt and amgoing to run it on carpet indoor oval and offroad and was trying to decide what tires i want to use i really love my proline suburbs on my losi 22b but they make a specific front and a rear for a buggy and...
Last post
Ok cool thanks i gonna go and pick some up then thanks
I got myself a set of See's for my old/new runner. I'm probably going to run losi step pins on the rear, simply because they are modern tires and can be replaced easily and they work well. I want to run something a bit more rare on the front since...
Last post
most likely going to be run on medium to lose dirt, and might see the rare hard surface.
I'm leaning towards using knobby tires
or a modern knobby tire such as the Traxxas
BUT, really like the Proline reinforced rib tires
I found a photos of...
While looking at the pieces of my Kyosho 2014 Beetle, I noticed that the front wheels used 8mm od bearings. Seeing that 8mm is nearly identical to 5/16, I put some old 5/16 X 3/16 bearings in and put them on a RC10 axle.
The Kyosho wheel is a...
Last post
Doing a little research revealed that the Turbo Scorpion uses the same steering assembly and 8mm od bearings as well. It also appears that it uses a 12mm hex rear wheel.
So, this may turn out to be another 2.2 wheel option.
I'm restoring a early B2. Did the B2 front tires that came with the kit come with blank sidewall pro line tires? The correct front wheel size is 2.125 ? Thanks!
Last post
This is what Niki told me when I asked him about B2 wheels:
You can use ASC9480 or ASC9481 front wheels on NIX91 and B2 if you find those somewhere. Wheel axle ASC6220 should be used on NIX91 and B2.
Easiest way is to buy RC10 rere-Worlds wheels +...
i've four different sets of front wheels for original classic gold pans, and one set of 30 year old bearings. they still spin like crazy but with Avid's great prices on bearings, i can afford a buck each bearing to get kitted up with some newer...
Need some help on these :oops: for the life of me I can't remember what the name of these were. What's really odd, is that one sets tread pattern is flipped in relation to the embossed lettering on the sidewall of the opposite side. Maybe there was...
Last post
It's interesting you say that! I bought both sets from an oval guy, maybe it was deliberate so guys could alternate them? Sadly both are new and were purchased out of package which is why I didn't have any info on them :oops:
I have a set of fronts I found that look just like the typical Sand Super rib tire included with the Scorpion cars, but the logo is Bridgestone, and a small Kyosho in a box. No numbers at all. I will post a pic later...any ideas what this is? Does...
Last post
The early Scorpion had 6 grooves, sharper around the edges and GoodYear on the sidewalls.
The two nearest to the right has GoodYear on the sidewall, the one to the left has SandSuper.
Three different tires. The middle one has 6 grooves the other two...