Jay Halsey Tranny Tips for TQ10/RC10

[Lazer]

https://dl.dropboxusercontent.com/u/18134364/rc.pdf

.pdf, enjoy!

[Rc4on]

Thank you very much, userful tips for beginner like me

[ShawnR]

Much appriciated... great knowledge for beginners

[Lazer]

My pleasure! Glad you all are enjoying it!

[FordPSD]

https://dl.dropboxusercontent.com/u/18134364/rc.pdf

.pdf, enjoy!

Thanks Lazer. I have never seen that article before. I printed it out and put it in my RC10 binder. The article I'm talking about has the case drilled out at the outdrives and has brass tubing inserted. It eliminates the middle non-flanged bearing in the outdrive. I found that the article was by Bob Gagne. I thought it was here where I found it but can no longer find it. I thought I saved the whole thing but there are pages missing. I did quite a few searches here and could no longer find it. Maybe I saw it on the web but I can't find it there neither. But I really appreciate the link to the Jay Halsey article!

Butch

[GoMachV]

Is this the one?
http://www.rc10talk.com/viewtopic.php?f=7&t=8834

[FordPSD]

Is this the one?
http://www.rc10talk.com/viewtopic.php?f=7&t=8834

That's the one Speed Racer!! Been looking all over for it! I don't know how you guys do your searches. I thought I did a pretty intensive search and cam up empty. I found more Kyoshsa stuff than anything else. Thanks! I do appreciate it. Going to print it out and put it in my binder!!

Butch

[jcwrks]

Lazer's url threw the ghost, so here is Jay Halsey's Tranny Tips in pdf. Click the pop out icon on the upper right to go full screen.

[RogueIV]

Lazer's url threw the ghost, so here is Jay Halsey's Tranny Tips in pdf. Click the pop out icon on the upper right to go full screen.

For anyone trying to recreate this theres one thing is this thats wrong. Do not use loctite on anything plastic! Loctite makes plastics brittle and can cause plastics to crack