Club 10 Racer

[Incredible_Serious]

Thanks Alex. Looks like I would have to do the same wheel trimming but the extra bearing definitely looks worth while. The hunt begins.

Quick! http://www.ebay.com.au/itm/122229492216

[CVRrc]

Quick! http://www.ebay.com.au/itm/122229492216

I was to slow still hunting!

[Retro rc]

Oops sorry bought both of his last 2

[snowfox]

The dual bearing hubs are very hard to find, cant belive that guy had 8 sets and I missed all of them!!

Great looking car BTW!! Should make a great racer., I know you most likely want to keep it all schumacher but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD

[klavy69]

but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD

Thanx for this random thought. It explains why I have a schumacher chassis with associated front arms, hubs and carriers sitting here. Never thought of why it was like that besides the fact that you use what you have on hand when not close to a hobby shop.

Todd

[CVRrc]

The dual bearing hubs are very hard to find, cant belive that guy had 8 sets and I missed all of them!!

Great looking car BTW!! Should make a great racer., I know you most likely want to keep it all schumacher but you could consider running RC10 front hubs and carriers, giving you more wheel and tire choice for racing. This is what a lot of racers would have done BITD

Thanks I'll look into that. I've also seen Schumie Rascal hubs and carriers being used, I might be able to find some nice purple alloy ones

[CVRrc]

Oops sorry bought both of his last 2

You could always give me a set out of pity

[Retro rc]

Oops sorry bought both of his last 2

You could always give me a set out of pity

Hey bud I've pm'd you a link to a set but there is another option you can use the front of the XTR, parts numbers you need are

U2330 which gives you mk1 cougar arms, c hubs and updated hub carries that take 2 bearings
U1410 x2 which are the bearings needed

Both are still available from Schumacher and are much cheaper

http://www.racing-cars.com/images/Technical_info/Schumacher/Old%20Cars/21%20XTR%203E/Exploded%20Diagram/xtr3eexplodedweb.pdf