Picked up an RTR DR10 today at the hobby shop. They had a few hop ups for B5 that I picked up also. I’m running a 3s lipo and with the Stock 3300kv I wish it was faster. Having said that I’m still happy with it. I want try faster brushless set ups in it.
Hit me up when you are ready for a wheelie bar not all 10”ers are created equal
Attachments
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
shodog wrote: ↑Mon Oct 19, 2020 8:43 pm
At first I thought would I need all 10”? My girlfriend says yes
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
GoMachV wrote: ↑Mon Oct 19, 2020 8:02 pm
Hit me up when you are ready for a wheelie bar not all 10”ers are created equal
Thats a nice bar brother, anything for the first gen SC10's anything drag racing??
Only DR10 and Traxxas bars right now. I haven’t looked into making something for the SC10 setup. Probably better to message me so we don’t blow up shodogs thread haha
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Nice lookin' DR10. I've been kickin' around the idea of getting into a drag car myself as a new project maybe this winter. Not to get into club racing, but just like you, just to overpower it and have some fun with.
A DR10 was sitting idle with only a dozen runs on it, each one ended with the car sliding on its roof.
After reading this thread I started ordering parts.
The chassis, shock towers, and front bumper were dirt cheap off of ebay. The v2 shocks,...
Last post
Ran in to another problem, my smallest esc would not fit between the battery and front bulkhead. After quite a bit of fiddling I gave up on the transverse mounted battery.
A couple of hours later a new chassis brace popped out of the printer. There...
Picked up a DR10 and as many already know- the stock 3300kv system is weak sauce. I had a couple motors to play with but nothing crazy. Hottest was a 7.5t Track Star. I didn’t think it would be enough so I ordered a cheap 3.5t Surpass to play with...
Last post
Heres a 6 minute video from the event.... (may be some bad language)
I am getting around to ordering final components for my DR10 kit, and I am on batteries now. Is this modern age of 6000mah+ lipos, it seems like a lot of people are running this type of 2S in their no prep cars. But when I think of 1:1 drag cars,...
Last post
If the C ratings are to be trusted, and using some numbers posted above, that means the 6200 (6.2a) at 120c would be capable of a 744a discharge rate. The 4750 (4.75a) at 175c would be capable of a 831a discharge rate. This season we ran gens ace...
The plan here was to build a kit form RB10. I am just not a RTR fan in general. I don't know the quality of the AE RTR electronics, but I tend to not trust RTR electronics usually. I like to be the one that torques things, adds the loc-tite and...
I’ve always been fascinated with R/C cars. I recall having a few low end ones that went forwards and backwards and only turned in reverse. One year for Christmas I got a Shinsei Dust Runner ATC 250 three wheeler. It was digital proportional and was...
Well thanks to Shodog My Pro is hasnt looked this good since it was new!! I didnt kringe as much as the wife did, when I plunked down the dollars for this body. But then I looked at it for two weeks before I had the heart to cut it :mrgreen: well I...
Last post
just stripe and sticker it and leave the rest clear 8)