5 link rear suspension question

[bigmd]

Ok so I picked up a JrxT off eBay and realized later that it’s been converted to rear control arms. I assume with the control arms the links from the chassis are obsolete ? It still has the chassis posts . Does anyone have the part numbers for the rear links that would replace the arms ? And do I also need to replace the hinge pins at the bulkhead to go back to stock?
Thanks

[RogueIV]

the bulkhead hinge pins should be the same, unless they swapped out to RPM hinge pins that only have 1 E clip slot.

Rear links are A-2004, which covers 1 side.

You'll also need the lower shock shackle as well which is A-5001 (or A-5010 which has spring clamps too)

Also if is doesn't have the squared off rear pivot support, that's A-2002.

All this info is in the manual, which can be downloaded here: http://vintagelosi.com/ManualsGuides.html

[bigmd]

Thank you sir. Also, the RPM .050 rear links are just a narrower version?

[RogueIV]

Thank you sir. Also, the RPM .050 rear links are just a narrower version?

Yes they were used to give more toe in by replacing the front link.

[bigmd]

Awesome . Thanks for the help and info.