im still confused about the side boards...???Charlie don't surf wrote:2" tall rear wing, 45 deg angle (towards the rear of the car), right triangle sideboards
and in most cases on a 2" max wing, you want to subtract for the 1/2" wickerbill at the
top----------------------you know this really would have been easier if you let me send you
one of my bodies
Mid Motor rc10 late model with a custom chassis
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 22 times
Re: rc10 mid motor oval build, with custom chassis
- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: rc10 mid motor oval build, with custom chassis
See the triangular "braces" in the pic, side boards--they keep you wing upright & stabilize the rear of the car
in the straights by keeping the air over the wing
in the straights by keeping the air over the wing
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 22 times
Re: rc10 mid motor oval build, with custom chassis
k, but it looks like their is more than just the painted parts on their?.... hard to see. im on a net book, 11inch screen...dohCharlie don't surf wrote:See the triangular "braces" in the pic, side boards--they keep you wing upright & stabilize the rear of the car
in the straights by keeping the air over the wing
- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: rc10 mid motor oval build, with custom chassis
They are just .020 lexan, same as the rear wing, with a 90 deg bend at the bottom to attach to the
deck of the body, you build the rear wing, attach to the deck then add the sideboards
deck of the body, you build the rear wing, attach to the deck then add the sideboards
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 22 times
Re: rc10 mid motor oval build, with custom chassis
hmmm ok...... i will look for some more pics of late models...
Re: rc10 mid motor oval build, with custom chassis
Wow, I haven't seen this build before. Nice job on the chassis, it came out looking like a production unit. Should be a good andling car.
- PBR Allstar
- Approved Member
- Posts: 805
- Joined: Mon Apr 30, 2007 10:30 pm
- Location: Sonoma, Ca
- Has thanked: 2 times
- Been thanked: 3 times
Re: rc10 mid motor oval build, with custom chassis
Greg, Here are a couple pics of my bodies, unlike charlies, my side boards are flat and I attatch them to the side of body.




- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: mid motor rc10 late model with a custom chassis
PBR, I need you to list your top 3 bands, (past 5 Years) to settle a bet-, associated with your name
- scr8p
- Administrator
- Posts: 16751
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 33 times
- Been thanked: 1216 times
Re: mid motor rc10 late model with a custom chassis
i thought it meant he was a stand out in professional bull riding.Charlie don't surf wrote:PBR, I need you to list your top 3 bands, (past 5 Years) to settle a bet-, associated with your name

- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: mid motor rc10 late model with a custom chassis
As the Rochester gang would say--NIP, I have a feeling you are incorrect
- PBR Allstar
- Approved Member
- Posts: 805
- Joined: Mon Apr 30, 2007 10:30 pm
- Location: Sonoma, Ca
- Has thanked: 2 times
- Been thanked: 3 times
Re: mid motor rc10 late model with a custom chassis
Oh man,,, I have internet rc car forum junkies taking bets as to the origins of my screen name??? I kind of want to ask what the different guess' are! and no Scr8p, my girl is the "bull rider" in our house!
The name actually came from a canoe if you can believe that. I've used the screen name for about 8 years on various sites and boards. Anyway, it started from a canoe trip that a buddy of mine used to organize every summer. I had an old Blue "old town" canoe, I worked at a place that had a signguy on staff and he made me some white Pabst Blue Ribbon logos for the sides of it. I've always been a PBR and Miller High Life drinker so it was fitting. Anyway, the two guys that were always in my canoe with me (I think because no one else wanted to deal with them) and I were always like an hour to two hours later getting off the river to camp then the other boats in the group, so people started calling us the "B team" or the "B team allstars" then I put stickers on the boat and now I'm sure you can guess where it came from.
Well, I suppose I should still answer the bands question, I'm very much into punk and all incarnates of, from 1960's garage, pre punk, '77, new wave, post punk, east coast, beach, power pop, etc. Also very much into obscure underground east coast hip hop and dj's and I throw some jazz and old country/honky tonk for good balance
So I'm not sure if this is within the last five years of so,, I'm sure these three artists have had the most play over the last three though:
1) Smut Peddlers (punk band from Hermosa Beach)
2) MF Doom (east coast rapper/producer/dj)
3) The stooges (they will always be on the list, they are a permanent tie with Generation X)



The name actually came from a canoe if you can believe that. I've used the screen name for about 8 years on various sites and boards. Anyway, it started from a canoe trip that a buddy of mine used to organize every summer. I had an old Blue "old town" canoe, I worked at a place that had a signguy on staff and he made me some white Pabst Blue Ribbon logos for the sides of it. I've always been a PBR and Miller High Life drinker so it was fitting. Anyway, the two guys that were always in my canoe with me (I think because no one else wanted to deal with them) and I were always like an hour to two hours later getting off the river to camp then the other boats in the group, so people started calling us the "B team" or the "B team allstars" then I put stickers on the boat and now I'm sure you can guess where it came from.
Well, I suppose I should still answer the bands question, I'm very much into punk and all incarnates of, from 1960's garage, pre punk, '77, new wave, post punk, east coast, beach, power pop, etc. Also very much into obscure underground east coast hip hop and dj's and I throw some jazz and old country/honky tonk for good balance
So I'm not sure if this is within the last five years of so,, I'm sure these three artists have had the most play over the last three though:
1) Smut Peddlers (punk band from Hermosa Beach)
2) MF Doom (east coast rapper/producer/dj)
3) The stooges (they will always be on the list, they are a permanent tie with Generation X)
- Charlie don't surf
- Approved Member
- Posts: 9219
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Has thanked: 280 times
- Been thanked: 379 times
Re: mid motor rc10 late model with a custom chassis
Nice, I win--(just the way I like it), although I couldn't have possibly predicted the origins of the name--in fact I have only one CA based story that comes close to the canoe one,( Killer story BTW) well it started in San Francisco---and ended in Vegas 3 days later, so it's not really suited for here
Sorry Lowery for the misguided hyjack!
Back to you regularly scheduled shananagans
Sorry Lowery for the misguided hyjack!
Back to you regularly scheduled shananagans

-
- Regular Member
- Posts: 25
- Joined: Thu Feb 12, 2009 3:04 am
- Location: plover wisconsin
Re: mid motor rc10 late model with a custom chassis
Hey I see your car has the hpi 2 speed set up on it and was hoping you might know where I could fined a pinion set for that set up. A freind of mine has one but needs the pinion and I know they are threaded and pretty specific to the 2 speed so any help would be great. Very nice car by the way and unique in many ways. Have you raced it yet?
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 22 times
Re: mid motor rc10 late model with a custom chassis
haha yes i did have the 2speed on it, i took it off, the 10.5 didnt like it.... as for a pininon, yea hard to find, i thought i had an extra.. but i cant find it...62 bugzilla wrote:Hey I see your car has the hpi 2 speed set up on it and was hoping you might know where I could fined a pinion set for that set up. A freind of mine has one but needs the pinion and I know they are threaded and pretty specific to the 2 speed so any help would be great. Very nice car by the way and unique in many ways. Have you raced it yet?
i hope to race it this Friday, still waiting on rear tires...
-
- Regular Member
- Posts: 25
- Joined: Thu Feb 12, 2009 3:04 am
- Location: plover wisconsin
Re: mid motor rc10 late model with a custom chassis
Hey thanks for looking for the pinion and if you find it pm me and hope you get the tires in time to kick butt on friday. Good luck.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
Who is online
Users browsing this forum: Amazon [Bot] and 17 guests