How rare are yokomo wheels?

Post by **upforit365** » Sat Mar 08, 2014 6:05 am

Unless they have changed the design the JCRacing wheels are for the works '91or later only.They dont fit the 870c.

Post by **isobarik** » Mon Mar 10, 2014 5:01 am

have a box full i think around 80 complete sets if im not misstaken ....

mvh isobarik

Post by **Minisforever** » Mon Mar 10, 2014 8:53 am

Lol i figured someone had a box full of them.....now I know why I can't find any, isobarik has them all!

Post by **minimini** » Wed Mar 12, 2014 7:51 am

aip47-2008 wrote:
stickboy007 wrote:My understanding is the deep offset wheels were only for the 870C. Occasionally they show up on eBay.
The deep off-set rears were also intended for, or also used on the RC10.

yes.....for the RC10AX (Japanese version)

also for those who like to do a Masami's replica....including me.....

Post by **GoMachV** » Wed Mar 12, 2014 10:45 pm

Well, this is disappointing

if it says ORIGINAL YZ10 you would think they mean the early cars. Oh well.

Post by **rccars4sal** » Wed Mar 12, 2014 11:31 pm

How much narrower will those wheels make an 870c?

Post by **Minisforever** » Wed Mar 12, 2014 11:55 pm

That's the jc wheel right? 2.0 or 2.1?

Post by **GoMachV** » Thu Mar 13, 2014 12:11 am

JC wheels, 2.2" I see about 7mm each side so 14mm total narrower than an 870c

Post by **isobarik** » Thu Mar 13, 2014 4:53 am

Minisforever wrote:Lol i figured someone had a box full of them.....now I know why I can't find any, isobarik has them all!

Yeah and its an box for vacume cleaner so its rather big , but since i
Had yokomo adapters for my cats and lazers it was easier to have just one type of
Wheels .

Mvh isobarik

Post by **rccars4sal** » Thu Mar 13, 2014 9:47 am

Ouch. 14mm a bit too much to try and make up. So, is it concluded that the only wheels to keep an 870c at proper width are going to be 2.0 deep offset wheels, like stock, or the prolines?

Post by **jwscab** » Thu Mar 13, 2014 9:59 am

yes, 7mm is what I calculated in the rear. I made special offset adapters to compensate.

Post by **GoMachV** » Thu Mar 13, 2014 10:01 am

rccars4sal wrote:Ouch. 14mm a bit too much to try and make up. So, is it concluded that the only wheels to keep an 870c at proper width are going to be 2.0 deep offset wheels, like stock, or the prolines?

Yes, or other period wheels like the Imex.

Post by **Asso_man!** » Thu Mar 13, 2014 12:19 pm

Hot Laps anyone?

Post by **aip47-2008** » Thu Mar 13, 2014 3:34 pm

rccars4sal wrote:Ouch. 14mm a bit too much to try and make up. So, is it concluded that the only wheels to keep an 870c at proper width are going to be 2.0 deep offset wheels, like stock, or the prolines?

There are three different size Team Yokomo options for the rear of your 870C or Team Associated/Yokomo imported YZ10. The front wheels for the 870C also have a different off set compared to the newer "Works" cars. If wanted, I can show you that as well.

Stock 2.0 inch rear wheel.

Roar Regulation 2.15 inch wheel.

And finally the 2.2 inch rear wheel, all of these part numbers have the deep off set needed for the rear of the 870C!

Post by **flustorm99** » Thu Mar 13, 2014 3:46 pm

Hey Aaron i started a thread and asked a similiar question re the works 91/93? Is it the same story ie they have some offset wheels or hubs because if i use the JC racing wheels Nd suzuki hubs the rears come in 1cm less in width then the front? looking at the manual the hubs look the same..cant tell re the wheels

RC10Talk - The Net's Largest Vintage R/C Community

How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Re: How rare are yokomo wheels?

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online