CRP/Turbo Scorpion Racer

[Hcp22]

Yet another nice part from Dwayne’s CNC machine:
It’s a wheel adapter to fit RC10 wheels on the Scorpion.

Dwayne RC10 Wheel adapter.JPG (38.07 KiB) Viewed 2077 times

Dwayne RC10 Wheel adapter.JPG (38.07 KiB) Viewed 2077 times

[Phin]

B4 wheels or B3/TT Phoenix wheels?

[Hcp22]

I’m no expert RC10 wheels, but I think the of-set isn’t god enough. So there will not be room for the shocks. The older 2.2” will give you that extra space, please correct me if I’m wrong.

[Phin]

The offset of the original RC10 wheels is the same as the B3 or the modern clone, the Thunder Tiger Phoenix BX wheels.

[Hcp22]

Dwayne is a productive man, he made a new Scorpion part. And I think he have peak on this thread sins he have countersunk screws…

[Raman]

After reading your thread, I decided to finally get going with my own build idea..

http://www.rc10talk.com/viewtopic.php?f=30&t=29068

[Hcp22]

Sound cool

[Raman]

sway bar 1.JPG

Where did you find that after market front camber link? I've never seen that one..

[Hcp22]

Those are MIP “Caster Locks” F-200 if that’s what you referring to?

MIP No. F-200 Cox Caster Locks Pair.jpg (32.26 KiB) Viewed 1900 times

MIP No. F-200 Cox Caster Locks Pair.jpg (32.26 KiB) Viewed 1900 times

[Raman]

Those are MIP “Caster Locks” F-200 if that’s what you referring to?

MIP No. F-200 Cox Caster Locks Pair.jpg

Very nice.. I broke so many of the caster locks.. wish I knew about those moore versions back then

[Hcp22]

Kyosho also mad improved caster locks SC-108

SC-108.jpg (3.61 KiB) Viewed 1894 times

SC-108.jpg (3.61 KiB) Viewed 1894 times

option parts 51.jpg (49.3 KiB) Viewed 1894 times

option parts 51.jpg (49.3 KiB) Viewed 1894 times

[Raman]

wow I never knew.. I used to buy my parts at RacePrep.. they had some parts but not those!

[Hcp22]

wow I never knew.. I used to buy my parts at RacePrep.. they had some parts but not those!

What kind of Race Prep parts did you use and what was available for the scorp? I know about some...

[Raman]

wow I never knew.. I used to buy my parts at RacePrep.. they had some parts but not those!

What kind of Race Prep parts did you use and what was available for the scorp? I know about some...

RadePrep was a hobby shop that also made aftermarket parts. That is where i bought my Scorpion. I used to have dampers from them for my scorpion, they were red and big bore. I don't remember what else they had, I was not aware of many hop ups back then. I used to break broken parts with the oem parts

[Hcp22]

There were lots of hop-ups for the Scorpion, I know about approxemently 100 non Kyosho hop-up’s especially made for Scorpion. Then you have all universal hop-ups that fit several of cars from that era.

Your red “big bore” shocks might be Kyosho #1886. They were used as replacement at the rear. Or used at the front with CRP’s front tower adapters #1542 and at the rear Kyosho CB-88 shocks together with CRP’s rear shock tower #1536

Kyosho “big bore” shocks #1886

Kyosho shocks #1886 and CB-88