i have a front set in puke yellow if ya want them, they didnt get any action on ebay for me for $.99 cents with $2.00 for shipping, the adapters are worth that lol
These are listed as for JRX2 . Does anyone know did HPI make wheels for specific applications or are these universal if using the HPI bearing/wheel adapter set(s)? If I track down the adapters, could I slam these on a TRX series buggy?...
Last post
Soak them in a strong degreaser, chrome will come off.
2nd this. purple power overnight and they were white the next. All chrome in the bottom of the container.
back in the 90´s almost every kyosho Lazer ran the five spoke wheels from HPI does any one sitting on an extra upset of wheels???
It is possible to order them from HPI but they only cary the rear wheels and not the narrov front.
mvh Isobarik 8)
Last post
Yeah i have seen that the HPI letters are missing.
I just hope that the offset is what it used to be since i have ordered a pair, time will let us know.
Does anybody know whether the 'chrome' versions were just painted metallic silver?
I have my original set of these - lovely deep dish on the rears and it look like the finish is rubbing off the fronts very slightly in a few places. I was...
Not sure where to put this so since the wheels are going on my JrXT I’ll ask here…. Got a set of front HPI super star wheels with the purchase of the JRXT, but the 3/16x3/8 bearings from the stock front wheels are too small for the HPI wheels….The...
Last post
Could someone please provide information on the front wheel bearing size for the HPI MT Super Star? Thanks!
It depeds on which adapter you have to use. Look at the above pictures.
Not the first time someone has done this but I had this project planed out for at least 3 years now. Mike did it on his Ultima and I thought I would try it for this RC10. The challenge was to make the front work with BB like a standard wheel. I...
Last post
Fantastic! Definitely going to give it a shot. Thanks for clearing that up.