Just thought I'd share one of my few rarities with all of you: It has mostly been built but obviously never ran. Everything is original and from the same kit. It has been sitting in storage for ages. The only parts I've misplaced is 1 front spring, original body and original wing. It was given to me by the original owner who never took the initiative to finish building it or enjoying it. Unfortunately the box and manual were never given to me but no big loss, it's the car that counts. Also, I've included some pics of some associated paper work; can't exactly remember what motor some of it was for though. Personally, I've never seen a new and original one ever. So, for all you RC10 fans here you go, Enjoy!
Here are a couple of my rarities I wanted to share with you also. Can't decide if I like the older style white parts or the newer black ones...
I added a couple of pics of a Team car that's never seen daylight or dirt. I really like the white parts on the black chassies for SURE!
Remember it's either a runner or a shelfer. Everything else is just parts.
lexus-5 wrote:Here are a couple of my rarities I wanted to share with you also. Can't decide if I like the older style white parts or the newer black ones...
It might be blasphemy, but I will always vote black! Don't get me wrong, I appreciate the pristine white of a well preserved RC10, but I still love black parts on any car. For whatever my opinion is worth... Great cars all around!
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring." Ken
lexus-5 love your collection i have nice new one im building half put it on the back burner for the last couple of months will dig it out and post what i have done so far
oh and the white ones rule over black great pics to
regards Paul
treehugger wrote:lexus-5 love your collection i have nice new one im building half put it on the back burner for the last couple of months will dig it out and post what i have done so far
oh and the white ones rule over black great pics to
regards Paul
What exactly are you building?
Remember it's either a runner or a shelfer. Everything else is just parts.
Might not fit in this string....but then again it might, Associated CE with 4WD MIP conversion never seen dirt or daylight...what ever happened to the talk about re-releasing a 4WD kit?
Remember it's either a runner or a shelfer. Everything else is just parts.
I'm new to forums and RC cars but I recently found in my attic my rc10 world's car in near perfect condition the other day. I never ran it myself before then but the guy who gave it to me ran it maybe once. I took it up to a hobby shop and they got...
Last post
Hey green... have you seen my RC10T/B ?
Its simply an RC10T with a buggy body.
I have yet to not find a part available for it... many at my local hobby shop.
Other parts made available thru this forum quickly and easily!
I had been racing for about a 2 years campaigning a frog then a wildone and finally with a Fox. The fox was competitve but the few who had just bought the new RC10 were just decimating everybody on the track. Luckily my mom came to one race and saw...
Last post
This is a great story Ruffy and it took me back to my story. :D
I remember when I was a kid and some older kids that came to visit my neighbor brought with them a Hornet and a Grasshopper with shiny 540 motors and I fell in love with the hobby. I...
Hello, I just bouhgt a new build Worlds Edition with the first stealth tranny, I has the moderm rear axles to run the B4 rear wheels, can I run the B4 front rims with the original setup?
Also, the original stealth ttranny case... could I pop a...
Last post
first off, i'm trying to figure out why you'd want to change, and run, a new built worlds car. :?
but anyways..........
b4 wheels will work on the front of the old rc10's. but they will narrow up the track width a bit.
I have a chance to buy what the owner claims is a never run, Edinger RC10 with box and everything with it, motor and electronics still in bags. Only the body had been painted. His pictures support this claim, but wondering if worth the 600 dollar...
I fully understand theory but what I'd like to know is how do they drive compared to the standard a-arm setups? The only trailing arm car I've ever driven is my JRX2 with it's 5 link suspension which is sort of an evolved trailing arm setup. There...
Last post
I used to race an RC-10 with an Andys composite chassis and Andys trailing arms in the early 90's, similar to the A&L ones. The only thing I didn't like about them is that the camber changed alot through the range of motion.
I got my new motor in today, its a trinity 17t speed gems, brand new tekin rebel 2 esc. gp3300 6 cell, 12t pinion and 54t spur, no matter what i do this frekin car wants to burn up my motors, im about 5 inches from shelving it and calling it a loss....
Last post
Sometimes, it's hard to figure out the problem with just a picture. The 6 gear transmission can be a real pain sometimes. There's got to be some binding somewhere.
Does your car have dog bones...or universals? Are the wheels spaced out correctly?...
I need a little help likely understanding how best to raise the ride height on my RC10 so that I can race my son with his new traxxas stampede in the back yard.
I upgraded various parts a few years ago, when they were easier to get after the...
Last post
Success, my 1985ish RC10 runs on backyard grass! I wanted to post an update in case any other fathers of a certain age wanted to get their childhood RC10 in a condition to race their son's traxxas in their backyard.
, NICE !
Great cars all around! 
