JRX series chassis's

[slapshot1979]

Ok, Im having a bit of trouble figuring out which chassis came with which car/truck and early late editions aswell.
What i have is 4 chassis plates all have 30 Degree's kick up, 3 have servo slots with white middle layer. 1 has no slot and has a nice shiney finish.
Can someone direct me to a link or help a guy out.

[Charlie don't surf]

Pics, pics pics- The Jrx-t/Jrx-pro chassis is the same, the JRX-2 is different and has a 20deg k/u
earlier chassis were non servo slotted ( as well as other things ) and the later ones had slots-

I have a NIP JRX-t chassis for comparison pics if you need

[aconsola]

servo slot=jrx-pro
no slot =jrx-t or pro-formance upgrade kit.

JRX-2 is 20 degree nose and completely different shape

[slapshot1979]

Dam buy 4 different cars unseen and not 1 is a JRX2 platform DOH. Oh well I guess I will end up with a JRXT instead. Thanks again

[sgirouard]

Dam buy 4 different cars unseen and not 1 is a JRX2 platform DOH. Oh well I guess I will end up with a JRXT instead. Thanks again

Yeah unseen is rough. What always sticks out in my mind about JRX-2 is that it was a flat piece with no "tub" qualities to it at all (plus the 20 degree kick up).

[slapshot1979]

Its still ok. I just wont be able to build the JRX2 I will have to make it a T.
Or I build a JRX2 runner with 30 K.U.

[scr8p]

build a pro if you don't want a jrxt. same chassis.

[slapshot1979]

I just finished building a pro as my last project. Kinda want to change it up. I May just build a nice T (I do need wheels), then a 30* JRX2 5 link runner and carry a bunch of spares.