I have been checking out this site alot looking at info on my RC0T2 That i bought when I was about 13, just dug it out and cleaned it up but i have always wanted a buggy and found one on craigslist for $50 so here it is I think its a worlds the tail is scraped up and alittle banged up and the nose is about the same but the bumper you se on it is what came with it i kinda dig it. Most of the white pars are red even the RPM front arms O and it came with a rc10 GT box full of parts for both GT and RC10 came with a motor installed too hooked up a esc and that old motor flies the body looks like a worlds but it is kinda beat up These pics are when i first got it two days ago. So did i make out ok
That's a worlds car, as you clean it up you might want to dye the old parts black to make the look a little better, or least it as it is. Sounds like a nice little score! Welcome to 10talk.
Nice, That car came off Craigslist, I emailed the seller asking for more pictures,the seller sent them at 7:35 Friday and I replied at 8:40 telling the seller Id take it just needed a time and place to meet,The ASS emails me back late Saturday saying they sold it.What a turd,I was going to email them back to bitch but fingered what good would it do so o well! anyway welcome to the form and nice score.
It amazes me that people can't take 10 minutes to clean things like this up before listing on craigslist. Most of the rc stuff I see listed, even modern stuff that is sold by RC enthusiasts, seems like it was just run on a loose dirt track and put away that way.
flipwils11 wrote:It amazes me that people can't take 10 minutes to clean things like this up before listing on craigslist. Most of the rc stuff I see listed, even modern stuff that is sold by RC enthusiasts, seems like it was just run on a loose dirt track and put away that way.
I've seen that too quite often and always thought the same thing.I've gotten stuff that was absolutely filthy and within 5 minutes had it looking like new.Doesnt take much more then a damp paper towel to clean up after a run.Some folks are just lazy I guess.
Nice score for $50 and welcome to the forum.
I reckon if you disassembled it and cleaned (or dyed with RIT dye) it that car would look great. I think sometimes sellers leave the crud on to hide any damage but it seems that you still got a very nice score thats for sure.
Hello everyone, another new guy here. About a 2 months ago I bought 2 rc10 goldpan buggies and started tearing into them to mix and match to build one pretty nice runner…then I found this place…after changing my mind a dozen times, I’ve finally...
Hello All ,
I'm very new to the forum . Ive been soaking in as much info as possible . It's great ! well long story short I'm 35 got bit by the RC bug again after owning a hornet and then later ('in 89 ) a losi JRX2 when I was a kid . In the past...
Last post
Greene- very well could be. In the head-on shot I thought I saw a slot on the righthand spring cup, but on second glance it looks like a shadow. Based on that I ignored the rear tower as maybe an Edinger replacement part. My Cadillac had white...
Hello all, my name is Scott. I have to say this is an impressive site for RC10 related stuff. I just stumbled upon you guys yesterday and have been reading like crazy.
I was heavy into the RC world back in 2000 up until about 2006 and then got out...
So I ended up pulling my RC10 out of storage at the prodding of my co-workers, and decided to do what it needed to get it running again. My son is 11, just about the right age to get into it, and I figured, what the heck?
So when i ordered the many parts and pieces for my rebuild, i must have accidentally ordered a driver dude instead of a wing...please dont hate... but ill use the guy for a differenct rc10 i have. How do i mount the guy, and how do i go about...
Last post
As far as I know, just tape or double sided tape. I don't think there were ever any actual fasteners.
Must say though, I bought the driver too, but it kinda sucks because it doesn't look like the box art dude with the separate helmet. I have some...
I decided to join because I couldn't find answers to the questions I had. I rebuilt an RC10T recently, and thanks to my buddy, I now have a pile of RC10 parts to try and make into a couple of cars. When I was a kid, the RC10 was the car to...
Last post
Welcome! I have an RC10 myself! If you need any help seeing how things are put together, I'll be happy to help! :D
well this is the little brother to the RC10T in the other thread. its not done I have a new body on the way. and to make it cool it needed some Losi added to it, so some Losi aluminum wheels on the way. I think they will look good on the shelf...
Last post
What rims are you going to go with? I kind of think those black ones look pretty good with that green. It is bright. If you ever race it, you wouldn't lose track of it in the shuffle. :mrgreen:
Almost looks like the new Dodge sublime color. Testors...
Ok fella's don't give me to hard of a time I am building my first Rc10 in 20 years. and I am not starting with much? this will be long and drawn out because of lack of funding. and waiting on parts? I have 2 chassis Not sure what one I am going to...
Last post
Yikes, those aren't the ones you got from me I hope! If so, I will make it right. If not, let me know what you need and I will get it for you anyway.
By the way, that body is going to look cool on there!