Hello, I recently checked the plastic wheel hubs on my kyosho big brute and each rear wheel hub has 2 out of 4 pegs broken off... Does any one know of any replacement hubs that might work? I looked on ebay and found nothing... I wouldnt mind putting txt-1 style wheels on if the current ones are hard to find...
how about using some screws to fix it. Where the peg was, use a 3mm hex screw so that the head acts like the peg. You can also use regular screws...as long as the head is the same size as the original peg.
Guys for nexy yr the Venom vintage festival has made a few changes to the Hot Shot class. All will be running the whizzy silver 540 motor :lol:
You have to run oval block tires (Hot Shot) . No Grip tires not Supper Grippers. :lol:
No modified...
Last post
what really lets the Boomy/HS2 down is the front mono that is (i) not dimensioned properly (hence not enough droop) and (ii) not served by a proper swaybar mount (hence it rocks more than it absorbs bumps). Fit a dual (SS) shock setup to either,...
Hello, I am currently debating if I should use current original mechanical style speed controller or go with an ESC? The big brute has a 360 motor. any ESC recommended highly appreciated. Also it is using a BEC receiver.
Last post
too late I put my novak esc in it, it's twice the fun now :mrgreen: :mrgreen: :mrgreen:
Cannot find an original and wondering if there are any that are close to the orignal style by some manufacturer?
Last post
That looks great and nice info on the wheels. I just scored a decent set of original wheels and tires after a long hunt actually a complete pretty nice brute that with all my other parts it should come together nice. Of all my race cars as a kid...
I have discovered that I almost have enough parts to complete another Big Brute that I bought a few years ago. My other Big Brute is in pretty good shape and I think I will keep it on the shelf. This fixer-upper is just sitting around, so I should...
Last post
Thanks. I ordered a B-block from the UK a month ago that has still not arrived, so I am unable to take it for a run. I hope to make a video of it running and check top speed.
I also need to come up with a servo saver solution. I really do not want...
The original body is gone and on it's way to becoming a monster version of my real Wrangler. This is the JK body many use for crawler projects off Ebay. Stripped for paint of trim and such. I've had crawlers and get bored. Big brute is more my...
Last post
I also bought a couple sets of the 3Racing shocks and found them to be surprisingly good for the price ($29.99 for a set of four). I used them on an Optima and a Marui Galaxy. I found the shocks to be quite stiff, but a combination of lighter weight...
Hello, I recently replaced the stock kyosho steering servo with a futaba 3003 I managed to screw on the stock kyosho servo saver to the circular servor horn that comes with the futaba 3003. Does anyone know if the futaba 3003 has enough torque for...
Last post
time for a decent upgrade mr big lebowski :wink: plenty of cheap quality servo's on ebay and rc tech, just start a thread in the wanted section :)