Prototype RC10 Ad

[asashaw]

Check this out, it came with an old Edinger edition I picked up for the Goodyears. I hope the pictures come out big, I am just learning to use my scanner. Read the section on the shocks... I guess they decided to change the design. Really cool pictures here, single bellcrank, shock towers, etc. Enjoy! Anyone have anything else like this?

[shodog]

look at those crazy dampers. they look like kyosho's with CRP preload collars.

[Asso_man!]

Very nice find Asa; check out the rear bulkhead and strut too, I never saw those on any other prototype... I would love to see the same picture in color

[Mr. ED]

That servo position and the single steering crank would be a good idea for the shortened scorcher builders here.
thanks for posting the scan

[Dr. Robotnik]

look at those crazy dampers. they look like kyosho's with CRP preload collars.

That's because they are? Nice post Asa.

[templeofspeed]

The front shocks look like RC500.

[asashaw]

wish i could post a picture that was clearer...??? you can see more detail in the ad still

[templeofspeed]

It's pretty good, but you might try to take the scan down one level as it's a little bigger than a 19" monitor in my case. Still an awesome find (I saved a copy).



Now we need to have a discussion about this particular car. What's up with the throttle servo on the RH side that's not connected to anything?

[asashaw]

i have another picture of a protoype hand built car but the picture is like 2 inches and i dont think it will show up well, but i will try later. it also has the single bellcrank but looks closer to an rc10 than this protoype

[Erich Reichert]

Dig those Tamiya Hornet wheels and front tires! LOL

[highwayracer]

it doesn't look like that there are any nose tubes connecting the front skid plate to the chassis. I don't know what kind of rear tires those are, but I have a new pair that'll probably put on my next build.

highwayracer

[asashaw]

is this better? i found a scan of a protype Jrx-2 (i guess, was that the first losi car?) it has associated parts on it, lol. the picture is only like 2x3 inches... should i try and post?

[aconsola]

is this better? i found a scan of a protype Jrx-2 (i guess, was that the first losi car?) it has associated parts on it, lol. the picture is only like 2x3 inches... should i try and post?

post it up!

[asashaw]

i started a new protoype post for the Jrx-2. check it out

http://www.rc10talk.com/viewtopic.php?f=7&t=4292&start=0&st=0&sk=t&sd=a

[Bugle]

There are some pics of the nose tube-less RC10 prototype in this article aswell. Just looks like it has different rear shocks. http://www.rc10talk.com/viewtopic.php?f=7&t=3834