Hey!
I’m about to upgrade my 13.5t motor and ESC to 7.5t or something in that range. But I’m on a budget. About $100-150. Can I find somewhat good set of sensored motor and ESC for mod buggy class.
I've had good luck with Turnigy Trackstar motors and ESC from Hobbyking.
If a jobs not worth doing then its certainly not worth doing well.
A problem shared is a problem halved but an advantage shared is no advantage at all.
Yea I looked at those too but all the trackstar motor are out of stock expect the 21.5 and 3.5. Are there any other good budget motor or should I just wait them to get back in stock?
Never tried them (or any electric motor for that matter), but I have been looking around for what’s available to me, and the Hobbywing Xerun and Ezrun motors and ESCs are what I’m leaning towards.
EDIT: Oh, I assumed you were looking for brushless.
Hi I'm updating my 80's vintage RC10 and I want to install a new ESC but I'm on a budget. Looking at a couple on eBay. One's a duratrax slash the other is a dynamite tazer. Does anybody have any input on these. I'm staying sorta old school and using...
Last post
That is a priceless 2 cents! :wink: Sadly, sometimes people do not take good advice!
I'm looking to get a brushless motor setup, I'd like to have a decent amount of power, but nothing to overwhelm my car (stealth transmission gold pan, with B4 slipper assembly). I've picked out a few parts that would seem to work...
Ok, I have this motor that I pulled off my newly found RC10 buggy and I can't seem to find any info on it. I'm curious if anyone knows what turn it is? Also I have this ESC that has been sitting around awhile and I'm curious if they are any good or...
Last post
That's a bit harsh... the ProDigi is an excellent ESC that can run with anything out there from bitd... I have a couple of friends who still race theirs in 2wd mod (where brushed motors are particularly appropriate) with success.
So I run the Castle Sidewinder 3 in both my RC10T buggy conversion, and also in my B4. Same exact setup, they also both have slicks for the clay track.
The big difference is that the B4 has a gear diff, and the RC10T has a ball diff.
What I have...
Last post
I *REALLY* love driving the T-buggy. It's so much more forgiving than my B4. Plus it's fun to surprise some of the newer guys with just how good an old car can be.
I know there's a TON of factors that could play in why the B4 is faster than the...
Im sure this has already been talked about but i couldnt find it. I have a rc10t2 and was told to look at the ez run motors and there are several! not sure how to get the right one.. i want to run the car just dont want the best of the best! just...
Last post
I generally don't gear for speed, but for temps specially the lower KV motors like the 17.5 and 13.5 which I use mainly. As I mentioned, my local track is 1/8th scale and jumps are huge and far apart, so I gear accordingly. My cars don't have an...
I know its probably been covered a milion times but the searching can be a pain! I don't mind links to help point me the the stuff I am asking about though.
First are my cars, esc's and motors. All 1990's stuff. I have a few radios from then too...
Last post
I just checked, they come preset at 0°.
For good brush life and limited wear, I typically run my motors conservatively at 6-8°.
For max power in a buggy, I'd run 15-20°. In a truck, probably no more than 15°. But depending on the application and...
I am building some Kyosho re-releases and wish to equip them with identical motor/ESCs. I am thinking a ~2500kv motor and a hobbywing 60A ESC.
Like this:
Also, it seems it's cheaper to not choose a combo.
Motor:
ESC:
What do YOU suggest...
Last post
I ordered a Hobbywing XERUN Justock Zero Spec 17.5 combo at Amain Hobbies for $94.99. I should have waited on the Black Friday sale because they marked it down to $80.74!!! :roll: :lol: The motor is rated at 2100kV, so it should be tame in my...
Is there any issues with using copper stranded wires for the ESC and Motor?
Last post
just be careful when resoldering new wire into a speed control, some of them have multi-layered circuit boards which can pose a problem if you dont re-solder all they way through, try to get the heat on and off as quick as possible as surface mount...