This is a tribute to the great line of RC10 buggies produced since 1984-2009 (RC10 - RC10B4). This is a work in progress. It will take some time and help from fellow members, as we all learn new things about the different versions. So please be...
Last post
Question I haven't found a firm answer for... it seems some RC10's have much whiter Nylon than others. I'm not talking about dirt or oxidation/aging etc.. just simply as they came some cars had much whiter nylon. I know this because I was fortunate...
At that time wheel offsets were pretty small. So to increase the suspension length you needed to stretch the arm and get the added length wherever you could. That meant putting the inner mount closer inboard.
Curtis and I have been emailing back and forth quite a bit thanks to Gene for getting our emails to each other, after messaging Gene.
During this time we spoke about the development of the RC10 cars and also regarding the wing for his Box Art car,...
Last post
It's so incredibly cool to see these cars after all of these years!
Some of you had a look to my replica of the Brian's 1993 World Winning RC10 Team Car.
Probably less knows than the car was stollen few weeks after the race, in Japan, during the Reedy Race.
Recently received this RC10 from ebay. Got it torn down and cleaned.
One of the idler gears, ASC#6613, has a couple chips out of the teeth.
Is there anyone making those for sale?
Last post
I'm guessing that comment wasn't posted by Kevin Talbot. :lol:
Actually, doing wheelies really isn't harmful. It's the sudden shock to the drive train from the tires losing then suddenly gaining grip under throttle as the car lands from a jump or...
Hi I have recently dug out my old B3 with the idea of taking up racing again and I have noticed I am missing the CVD dog bone and the relevant pins and coupling. As I am looking to race the car my intention is to try and replace the parts I need to...
Last post
I have a B3 that I need to dig out of storage, I know I have a lot of spare parts from my racing days at OCRC
Fan RC is reproducing them but they appear to be out of stock everywhere.
I know Avid makes a version but it's aluminum and I'd prefer a steel shaft and gear.
Anyone else making these?
Last post
There could be some inexpensive gearboxes that periodically pop up. That shaft and the slipper assembly are in:
.
1000011068.png
While I was waiting for the TBG TQ10 body to make its way through the USPS black hole, I decided to slap together a Graphite basket case that has been warming the shelf for a number of years.
I decided to be a little less strict on my OEM only...
Last post
That has come together very nicely, awesome to see a brand new gold motor guard going on it 8)
Putting the finishing touches on a RC10GX stealth car from the kit that Grand Prix 3D sells.
Really like how the car is coming along, the parts in the GP3D kit are really nice quality and everything more or less fit. I bought the turnbuckles from...
I acquired a new build buggy from mikea96 several years ago. I was very pleased with his vision, but the purist in me decided to strip it down and make it an AE parts car only. The pic below shows some of the original parts that were sourced. Neon...
Last post
I finally set some time aside to do some more work on this build. I passed on the B2 style turnbuckles and stuck with the same style used for the earlier Team/Worlds. AE Ball studs are all the later stainless variant. I wanted to keep my Worlds...
The motor with a blue and chrome label that came with the original RC10.
There are no markings on the can or end bell and no reference to Reedy.
Was it made by Yokomo :?:
Last post
The first iteration was a Yokomo dry mag , and in 1988 they switched to the Yokomo wet mag when it became available.
Back at the work bench after a hiatus while building a house and then messing around with HO slot cars over the past few years. I started to restore this TQ10 several years ago but never got past tear down. I did collect a few NIB parts back then,...
Last post
I once had a TBG body go missing for months.
He ended up refunding my money. He was having trouble getting materials at the time, so it was about three months before I was able to reorder. Then, both showed up the same week.
I've finally got around to looking for a mid '80's RC10 buggy and have found one locally going at a good price.
Can someone date this sucker?
My economic forecast for 2009 looks bleak if I win this buggy:shock:
Dig that funky CRP bumper...That'll...
Last post
I've finally got around to looking for a mid '80's RC10 buggy and have found one locally going at a good price.
Can someone date this sucker?
My economic forecast for 2009 looks bleak if I win this buggy:shock:
Dig that funky CRP bumper...That'll...
The budget runner brothers freshly-batteried for summer and ready for first shakedown!
The brushless car features a JC Racing transmission (adapted for stock dogbones with a slight motor plate mod for pin-clearance which works great).
Brushed car...
Question for our more knowledgeable members.. I have been trying to find some new gold aluminum screws 8-32 for my RC10 builds and they seem hard to find.
I've made millions of custom screws and hardware over my career, and I'm thinking of just...
Last post
Gotcha, my only concern was maybe the 7/8 ones might strip the threads where the pan and nose meet but I'm adding a bell crank with bearings and aluminum servo saver so those nylon nuts are at best making ebay if not the trash. I only needed to...
Total newbie here. RC10 brain trust: What are the go-to tires (and maybe replacement wheels) for neighborhood bashers? I’ll be running the 40th re-re as I would have 35 years ago in a mixed urban environment (parks, ball field, streets, curb...
Last post
Thanks @juicedcoupe
I see the brand JConcepts popping up a lot on searches.
My TT-02B has Tamiya Dual Block K tires, which look somewhat closer to the J Concepts Double Dee or Barcode tires. The Tamiya tires seem not great on any particular...
EDIT: I've decided to go with B1M as the official name for this car/kit. Yes, I had an earlier MM car that was a one-off that I called the B1M, but just think of that one as a very early prototype for this one :lol:
Some of you may remember my mid...
Last post
I would take a scan of it! At least it would give me hope that I could bring that to someone who could possibly machine it for me in the future. :)
Sooo-- I moved to South Carolina, just south of Charlotte. Been here 9 years now-- had no idea it was such an RC racing hotbed --particularly outdoor 1/8th scale.
Well, one of the tracks just opened...
Last post
still going strong-- had to make a new front tower-- been loaning it out to friends who want to try off-road outdoor.
picked up a used Hobbywing Pro and put that 8T delta Muchmore in it-- plenty of power, now! :D :D
Anyone no the difference between the 10t vs rc10 rpm enhanced steering kits?
Last post
Here's a picture of the 2 kits. As mentioned already, the difference is the length of the arms. The second picture tries to show that difference as best as I could.
I am working on getting a short-arm RC10 going again and I need tie-rods. Where are you getting yours? I can't seem to find anything that is not ridiculously over priced.
Thanks.
Last post
On a couple of builds I've used Secraft stainless steel tie rods.
They are cheap and have a pretty cool retro vibe.
Both 4-40 and m3
Hi!
I'am building an brand new RC10 World's from old and new parts. Last part missing is the ASC7377 - Rear Axle Bearing Spacer. I can't find it anywhere. I know I could buy a B4, or T4, that used this part, but I hope RC10 Talk community could help...
The RC10 has such a wide nose plate, it's just like it's made to be tinkered with. So why not do a lay down front suspension?
.
PXL_20230919_172801854~2.jpg
.
PXL_20230919_175111687.jpg
.
It bolts up nicely in place and works smoothly. The...
Last post
I like the low slung sawed off look of that body, great candidate for this build……
I’d say to figure out a paint scheme that shows off the lay down front shocks maybe either clear or trans candy. It would be a shame to cover them up.
I swear I searched and couldn't find it. I know there's a thread that shows how to convert a B4 to 12mm hexes up front using non-Associated (easy to find) parts but I can't find it. I had it saved on my last phone but it died 😔
Any help is greatly...
Last post
Do you know if the Traxxas axle carriers fit the B4 c-hubs?
I have adapted the smaller (5X8) bearing type. They are only used on the brushed Bandit buggy (VXL's use the larger one) now. Rustlers and Stampedes also used them in the past.
thought i might as well post this here since its getting close to finished .
started as a basket case i posted about here years ago . my youngest (7) wanted his own car so i got to work . need to order a body and and do a final tear down and clean...
What are the most common sizes used on pre-B5 era Associated buggies?
.05
1/16
3/32
5/64
Was 5/64 used a lot? I don't remember. I vaguely remember 3/32 being the most common size for most fasteners on the B4.
Last post
5/64 isnt used for anything really but the stealth diff screw- however it works great as a 2.0mm driver for metric screws. Also a lot of pinions these days are metric, so a 1.5mm is handy. You will want a 2.5mm for the motor screws. For the 6 gear...
Does the original 2.25:1 stealth transmission just bolt in the 6-Gear tranny hold pattern on the gold chassis? NO MODIFICATION REQUIRED?
I've got a B stamp Championship Edition with the 6-gear. Dont want to drill the chassis. Looking at buying a...
Last post
That is a really trick mod. Support for those gears will absolutely prolong their life.
Thanks!
A tiny amount of blue thread locker applied to each screw then, using a couple new hex wrenches, twist both screws together very tight so everything...
ok so i'm going down a lot of rabbit holes for various transmissions. just looking at options for replacing the 6-gear. Looking at the factory works/jc racing tranny case and going through the parts they list. I was able to track all the parts...
Last post
looks like John slipped up, that should say 9739, its the spring for the slipper.
If you want to save some money, sometimes you can find RB10/DR10 kits broken up and most of the stuff is usable. The diff can be used, you will need some shims. The...
Here is a RC10B2 project i picked up plus i picked up some new spares and have a few more items on there way to me. Sorry for the bad picture i will get a better one up soon.
The overall chassis dimensions were close enough that it seemed like 'a good idea' to move a 6 gear RC10 buggy from a heavily used A stamp chassis to a new RC10B6 91650 chassis. My standards for close enough are low though.
I started by printing a...
Last post
Today was finish off the 99.9% done projects day. The A+ chassis buggy just needed a front sway bar to be done. I tried to make some Dubro link ends work but in the end a 71091 DR10 sway bar kit, some 1/8 sleeves, and some 1/16 wire came together to...
This started as a project for a friend, but in the process of drawing it up and getting parts together I decided that I needed one too. The suspension arms, bellcranks, shock towers, battery cups, chassis, top plate, etc. were all designed by...
Last post
New Dynotech outdrives installed and gearbox whitened.
Nice to have this one done again.
.
1000010314.jpg
So, I've been gifted one these kits by a good dude for helping him out by storing stuff the last 6-7 months or so. I think it's way overpayment for my services, but he disagrees. :lol:
I knew it was only a matter of time before someone made this a...
Last post
It already takes me forever to get a car built. And now with getting back into racing more, and traveling to events, I have even less money to put into them.
Started building a new stealth trans this evening pulling out all the parts I’ve been hoarding b3 rebuild kit, new 6580, v2 slipper, avid top shaft. Line them all up and start greasing. I open the out drives that I remember scavenging for and...
Last post
Has anyone bought/used these Fan RC parts and can report on their quality? I've never heard of them before. Thanks.
Cars been in the garage for a few years and I'm dusting it back off. My son will be getting a set of keys soon and Id like to increase my insurance. I need a bumper and skid plate. I've already dented the front end pretty good but id like to protect...
Last post
the proline front bumpers are my favs . but these(kydex) protect the chassis better
My first post. I had an RC10CE in 1991 that’s long gone. Tamiya rereleases rekindled my rc habit a couple of years ago, and I have my eyes on an RC10 resto project. (Also hoping they do a 40th reissue).
I found this yesterday that might be too...
Last post
(Also hoping they do a 40th reissue).
They did. Kinda. :D
Welcome aboard!! Looks like a nice pan to start with!
It has been some years since I have posted. I sold most of my cars and custom builds some years ago.....of course I regret selling some of it. Only stuff I have left is in my signature.
I joined Facebook only because it seems like many people moved...
Last post
I added a note to the first page.
I switched to CW rear hubs and B44 CVD's.
The bones were too long at 67mm.
I will get to the electronics on this soon.
I'm super curious - how does the graphite tub chassis perform on the track? Have you or...
It was so joyful starting the resurrection of my old A stamp (late Edinger) so when I got into the build, I simply had to switch to a parallel build including a early Edinger I bought last year. Probably should have finished my own late Edinger...
Last post
Just thought I would also post up some pictures on the comparison of the ayk/ae tires. Since I have an ayk Sidewinder it would be interesting to consult the well-known relationship between the two.
As a predecessor to the RC10, the Sidewinder was...
The Losi family has had a strong connection to Team Associated and the RC10. The question has been asked, what if there was a pan chassis RC10 that came before the RC10B2, and the results are really cool. Multiple people have done excellent builds...
Last post
Well done sir! That is a great what if concept and, as usual, excellent work throughout.
JC has molded the conversion box I created that uses a B6 ball or gear diff and a DR10/SR10/RB10 slipper. This case will allow the buyer to bolt it right into any RC10 as it has both stealth and 6 gear holes, and will fit either trans brace. Keep an...
Last post
Just a heads up for those that are on the fence, I see that RCMart has added these cases in white and black, as well as the JC Protec body, Ultima/optima mid 2.2 wheels...
It's great to see this brand get some traction from distributors, I had not...
Remember that 4-10 auction on Ebay two weeks ago? Yeah, I'm that guy. I stayed late at work to snipe the auction (all is fair in love and war), which ended in both laughter and tears as I realized what I had done to my wallet. My apologies to any of...
Last post
Haha, thanks ;)
They are still sitting comfortably in my curio cabinet with some other unicorns in my collection...
Here we go again. I've had this NIP Composite Craft Worlds RC10 chassis for a few years. I was torn between building it vintage or modern. Since my first CC RC10 is mostly vintage with some modern touches, I wanted to stick true to one direction on...
Last post
I don’t know man I’m thinking that mini bumper has had that header card since day one…. Not seeing any other staple holes in it. The true tell will be if there’s more holes in the bag :D
I looked at it closely. The header card and staple appear...
Hi all, putting together a B3 and wanted to see some shock ideas. Im really happy with the 12mm shocks on my updated c tub. Has anyone went this direction with their b3s?Becuase I dont have any shocks, Im leaning toward 12mm. Your thoughts......
Last post
I went with 12mm big bore shocks.
how did you do your front hex conversion....if in fact that is what Im seeing?
Yes, you are seeing correctly. I used the Custom Works kit. However you can go other routes, such as using B6 parts.
Hello all! Would someone possibly have a picture or part #of the RC10 B4 K FACTORY Front mounts, so a carbon fiber tower can be mounted? I am having, a very tough time finding out what it exactly looks like.
Last post
20240229_071834.jpg
Here is a DMS carbon tower with the Cream Extreme RC titanium mounts. Sadly I don't think this will help you any since it looks like Cream Extreme may not be around these days.
Nearing a vintage race I've decided to dust off an old build of mine and let it stretch its legs. I've not posted this car before so even if it is an old and to this forum a fairly plain build, I throw it in here.
At first I could not remember...
Users browsing this forum: No registered users and 57 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
