I know there are holes in the list, but we can continue to build on this as we go. It's fairly comprehensive thus far, so hopefully this can help those of you who are looking for the general information on these motors. Feel free to offer...
This is the place to discus the: Ultimate Vintage Brushed Motor Reference Guide
For cleanliness and clarity, it was decided to no longer allow posts to be made in the actual topic itself. The discussion regarding it can be made here instead in...
Last post
I had a Ti Modified 7x2 hanging on my wall for 15 years. 2x I installed it into new cars and both times the cars were so incredibly fast that they rolled and tumbled. One broke.
So the motor was just too powerful. I just kept shelving it. I...
A while back I found a cool thread www.rc10talk.com/viewtopic.php?t=239 started by Scr8p that linked to a timeline Novak had on their website. With Novak updates ending the timeline in 2009, their eventual closure, and wayback links as the only...
Last post
Thanks for clearing up the questions I had for a long time now, with this post.
Futaba used to offer these two spec lists for their older discontinued receivers and servos. Now they're only available through the Internet Archives site. That's a bit of a pain. So I decided to edit them a bit, and post them here for easier...
Last post
I see that R142JE is called out in the manual. Somehow I muat have gotten confused about the 152 superseding the 142. Thanks for the measurements.
20 does sound like a good starting point. Just making sure 23 isn't more common.
I don't know much about it but it looks like a stock motor lathe. Does anyone know the model, or have a link to instructions on this lathe or type of lathe?
Is there...
Last post
I took another pass at the same motor. I cleaned it up better, but there are still issues with it. However this motor doesn't spin freely without brushes and springs in it. All my other motors have some degree of spin. I wonder if there is something...
Hey everyone, it took a ton of research but I've compiled an article that ran in Velocity RC Magazine about the Evolution of RC Batteries. You can read it at the link below:
Enjoy,
Jeff
Last post
The link in the OP still renders the battery article on my iPhone. :mrgreen:
I have an Edinger motor that was working ok. After a week it got slower and slower until it stopped. With Tamiya motors and prewar lionel trains a quick spray with electric contact cleaner usually fixes this. Well after a couple of shots with...
Last post
I have never opened one, but I have read various methods on this site. If no one responds, you might try searching. Your motor has been opened at least once already as evidenced by the motor tabs. You might be able to get a small flat blade...
Let's see your Revolution motor collections!
I love these motors,they are just the icing on the cake,on a nicely restored vintage Losi. :D
I finally found a Revolution I had long lusted after-the Daytona Oval,a vicious 8x1 wind with a white...
Last post
I recently got a silver label Revolution. The can is marked S6 or 56. It's a single wind. Any thoughts which motor this is?
.
1000010958.jpg
.
1000010959.jpg
.
1000010961.jpg
Hey guys, what can you tell me about this one from Novak?
In the pictures, look for a short bit of wire that is located at the receiver and switch output area. There are two wires, both red, soldered together. :shock:
I don't think that part was...
Last post
Out of the bag the 4 came with unterminated motor/battery wires. Deans plugs and a capacitor suggest it was used in an adults race car. The two small red wires are for the controllers BEC, connected together for up to 6 cell, unconnected for 7 and...
Looking for products to help with my brushed motors I found this
★Clean up your motor commutators with these brushes - around 2 or 3 minutes with battery pack connected will freshen up brushed motor performance. ★Contains two cleaning brushes....
Last post
All of my comm sticks are made from a flexible material, similar to a hard eraser.
The Trinity comm pen was just a fiberglass pen. The same generic type is still available on Amazon.
I am wondering if anyone out there remembers Team Ugly from way back in time for pan cars? I am rebuilding the missing pieces for the pull bar locking tab and battery tray but I am needing some pictures I can reference.
If anyone has...
Last post
Thanks for the link for the Viper build! Sweet looking car and they are not seen often. Ok, now I have a few ideas. I will make a template out of card stock and get it mocked up.
I got a result and managed to pick up a set of nip 1001 servo gears. I have 2 servos out of action because of gears, so now have another one up and running.
Happy days.
These came in a lot I purchased about a year ago. One is the speedworks oval and the other is the speedworks 427. They both seem like they were never used and I was thinking about using one in a build im doing most likely a truck as I am a truck...
Last post
If it matters to you, the specs are as follows...
The 427 motor is a 16X2 suited for 4WD with an RPM of 36,000.
The Dirt Oval motor is a 24X1 suited for 2WD Or 4WD with an RPM of 25,200.
Thanks! I was planning on putting it in a blackfoot...
Hi guys, recently I've purchased a pair of Peak brushed motors but I don't know anything about them. I've seen there were Peak Performace, Peak Racing and then Peak in the good old days is it the same brand?
Last post
If you check out new in the package 'Peak' motors, you'll see they give the company as Peak Performance on the back of the header cards. So they're one and the same.
From what I've found, the one you have seems to be a 15x3.
Looking for an ID and specs on this old fantom motor. Its been in a box for years. installed it in my rc10ce a while back and ran it a few times. car seems to move really well with it. just curious what this is. In the last pic, its says ROAR 91 on...
Last post
The pinion end looks like it uses a Parma can.
.
1000010444.png
Hi all, I recently picked up a vintage Futaba Magnum 1024 FP-T3PB PCM radio. I just had a few questions regarding crystals and module regarding this radio. Is someone able to help me out with these?
- Do I get single or dual conversion crystals for...
Last post
If you can find a spektrum module for it you can use 2.4 unless you want to keep it original.
Thats what I have done with me Fut 3VCS. love this radio and now its 2.4 its brought it back to life.
The only problem is I have to use DSM rx only...
Hi folks,
I have an Nosram Timeout discharger. I wonder if anybody knows why there are 3 leads on the input?
They are red,black and blue.
I use it sometimes just using the red and black, but I wonder what the blue was for?
Was it for saddle packs?
Thread dedicated to the wonderful motors of Nick Adams (RIP) of Demon Power Products.
No other motors please.
There are pictures and discussion about Demon motors spread over the forum.
But it´s quite a bit difficult to follow so I would like to...
Last post
One new addition. Interesting that a red label says gold on it . 8)
.
1000010327.jpg
.
I decided a Demon was the right motor for this buggy. I think it belongs in there.
.
1000010329.jpg
As soon as I touch the wires to the motor it starts spinning at full speed. The battery is plugged in, switch on, and throttle is not being pulled. Am I just switching the motor and battery wires or is something else happening?
Last post
Thanks! The manual was helpful. Took a couple tries but I got it working.
I'm throwing this together at the request of another member. This is just some of the stuff that I do, so take it for what it is. If someone has any ideas to add, please do so.
I rummaged through my stuff and found this crusty Peak Racing 12X2. It...
I've had this about eleven years now. This is the Pro hand wound version of the Spec 19 motor. These Quad Mag motors are really smooth to turn over by hand.
1.jpg
2.jpg
One interesting thing of note is that the Pro sticker has been placed over...
Last post
They are. I was fortunate enough to grab a couple of KRs too. Well before prices rose to ridiculous levels.
So, mADMan had been looking for some replacement foam wheel grips for his Sanwa MT-4. I did a bit of poking around and thought I'd post what I found here for anyone that needs to replace the foam grip on their transmitter (Futaba, maybe?) but cannot...
Always regretted selling my old FP-T3PB, Finally managed to grab an absolute mint condition one in Japan.
And a matching FP-R113P receiver.
The FM FP-T2PDF i discovered last year in the box, transmitter only, and the original FP-T2PD was mine from...
Hi
I have a new old Futaba T2PHKA radio that draws an impressive 230mA from 8x batteries.
The radio includes a socket on the rear that looks like it should be for plug in 12V. That doesn't seem to work.
Does anyone know what the socket is for?
Last post
According to the manual, the transmitter needs a 12VDC supply.
Reducing the power supply reduces the measured RF output.
Alkaline batteries have a higher voltage than equivalent nicd and nimh cells. The charger is designed around it's intended...
Right? Big League Chew was great. Bazooka was meh, but had comics. Double Bubble was tolerable for 30 seconds. Bubblicious, Hubba Bubba, and Bubble Yum were solid. Watermelon made my dad's head ache if I chewed it in the car. Orange was another...
After reading the Son of Psycho thread I thought I'd share a picture of this motor that has been in my collection for eleven years now. It is very pink, especially when viewed in person.
Fantom.jpg
Some of you may have read this, but I found it when searching for a 410K manual online. I was out of RC from 1995 and didnt get back into it until roughly 2006. I always wondered what happend to Tekin. The only other thing I'm curious as to what...
Last post
Found a video purportedly featuring Kevin Orton, in case you've wondered what he looked like.
Most motor brands didn't make their own cans or endbells. A thread with the options they had to choose from might be interesting. My intention is to just have a sample of each variation of the parts.
Starting with motors using Yokomo parts. Reedy...
Last post
I'm also going to lump together Diamond and Tomy for no particular reason.
.
1000009237.jpg
.
1000009236.jpg
have here a Kyosho 600 Motor, but dont now the Type!
-the case is like a 600 ST but you can open the case...
-do you have some Infos for me?
BR
Last post
Hi,
yes this is the motor, many thanks for the helping hand.
-I think the motor is good for my litte collection
-I like looking for very rar Motors like Demon Power King, Twister or MIH Master Blaster, for change I`m open
I have a couple of Reedy Modified motors myself. And can´t really tell which one would be my favorite.
At my collection there are the early Igarashi based ones but also something as Ultra or Mr. series.
Also sometimes some other Reedy comes up. But...
Last post
Are there any other colors of Reedy/Associated chrome label modified motors? These are the ones that I know of.
.
1000009180.jpg
Share your favorite ESC from your collection vintage or contemporary. I'm not a collector, but in my quest for period-correct electronics I've come to appreciate them over the decades. ESC's never get reissued and there is something very timeless...
Last post
I have got to add the CX-1 from KO Propo inside the 1987 winning 4WD Schumacher Cat buggy driven by Masami. Very modern and sleek design even by today's standards.
This Speed Gems Diamond 12x2 motor looks like it might have caught fire. I've had a couple of armatures with rough comms clean up nicely with some comm lathe resurfacing. This one will be interesting to find out how extensive the damage is.
....
Last post
It came with some other parts I needed. I already have a nice Diamond motor, so this one is ok to be a rebuild project.
Hello, first post here and was wondering if someone can tell me a little about these motors? I purchased one for $35 that supposedly still runs. Thanks
I am looking at a bunch of vintage ESCs, but most of them date back to the 1984/1985ish era, and I am looking for something appropriate for a 1980 rig. I guess 1st question would be, were there any mass produced, quality ESCs out at that time? Was...
Last post
In the late 1970’s Electro Craft had an ESC that gained popularity at the NORCAL 1/12 electric racing series in the San Francisco Bay Area of California. I think Electro Craft was based nearby in San Jose. They had a fast sponsored driver named...
Measured a bunch of my 540 class “silvercan” motors to see which one performs best in case of efficiency, wattage, revolutions under load... not all of them are brandnew, but the data helps me to select for some vintage-projekts so I just want to...
Last post
They are all nearby.. excelled the data, max. Torque in yellow:
i have this Sanwa transmitter and it's working for 41 MHz.
The thing i don't know if this working in AM or FM modulation.
It's 41 MHz AM or FM? On the manual say is full AM band.
The Tx i have, are equipped with a 41.040 MHz crystal....
Last post
Thanks Franken,
it's really 41MHz have a sticker on the remote.
It's working too with 40MHz set crystal?
I'm missing an era correct Tx/Rx for a recent RC10gt build.
But I have a Futaba 3PJ Super from the late 90's, the manual says it has an (8) model memory.
The FM/PCM has a failsafe/throttle cut, so I bought this with a Kyosho USA-1 Nitro Crusher,...
Last post
The eBay seller in Germany never got back to me about the Spektrum SPM1012 kit, with the SM1001 and SR3001.
But I found the earlier version though, which is closer to era correct for the USA-1 NC, and GT.
Seller's pics, these are on the way - still...
We all miss a timeline for Tekin ESC's and others.
With that said, I started to go through RCCA magazines from 1988 to parts of 1997. Now I know that the dates/years are not accurate as it all depends on when RCCA had the chance to get their hand on...
Last post
Great information! I have probably 20 Novak ESCs. This will be very helpful deciding which ESC for which vintage car.
Users browsing this forum: No registered users and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum