ultramolded worlds buggy build "purple monster's twin"
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
ultramolded worlds buggy build "purple monster's twin"
***thank you ASSO MAN for making this build possible***
starting with a decent used chassis and a bunch of new parts we start the build...
after all the used parts are clean i laid out all the trinity purple hardware i needed and started to assemble the beast!!
-- yummm new rpm bulkhead and worlds tower..
-- purple anoed motor plate and white stealth case
--front and rear bulkheads with towers installed
--trans installed with new brace, gear cover, front arms, black..grr..worlds steering- still looking for the right bell cranks.
and now the dilemma ..... ive only got one rear arm "the left one", but i have a nip rear worlds kit that i could open...... if any one has a right arm they would be willing to part with that would be awesome... i dont want to open this rear kit...
next to come are the shocks, still waiting on the front ones to come back from the anodizers
starting with a decent used chassis and a bunch of new parts we start the build...
after all the used parts are clean i laid out all the trinity purple hardware i needed and started to assemble the beast!!
-- yummm new rpm bulkhead and worlds tower..
-- purple anoed motor plate and white stealth case
--front and rear bulkheads with towers installed
--trans installed with new brace, gear cover, front arms, black..grr..worlds steering- still looking for the right bell cranks.
and now the dilemma ..... ive only got one rear arm "the left one", but i have a nip rear worlds kit that i could open...... if any one has a right arm they would be willing to part with that would be awesome... i dont want to open this rear kit...
next to come are the shocks, still waiting on the front ones to come back from the anodizers
-
- Approved Member
- Posts: 1004
- Joined: Thu Jan 01, 2009 11:00 pm
- Location: Otago New Zealand
- Been thanked: 1 time
Re: ultramolded worlds buggy build "purple monster's twin"
Lookin sweet...nice rig you've got there..
Pete
Pete
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: ultramolded worlds buggy build "purple monster's twin"
and now the dilemma ..... ive only got one rear arm "the left one", but i have a nip rear worlds kit that i could open...... if any one has a right arm they would be willing to part with that would be awesome... i dont want to open this rear kit...
I have the rear arms new in pack. $20 free shipping anywhere in the world. LMK
I have the rear arms new in pack. $20 free shipping anywhere in the world. LMK
- Attachments
-
- rpm rc10 rear arm.jpg (21.58 KiB) Viewed 1871 times
- rpm rc10 rear arm.jpg (21.58 KiB) Viewed 1871 times
AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: ultramolded worlds buggy build "purple monster's twin"
LOWERY!!!, I have a spare rear new worlds arm still on the tree for ya, and Prince steve--PM me your payal addy for the truck arms if not allready taken
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: ultramolded worlds buggy build "purple monster's twin"
You've got PM.Charlie don't surf wrote:LOWERY!!!, I have a spare rear new worlds arm still on the tree for ya, and Prince steve--PM me your payal addy for the truck arms if not allready taken
AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
Re: ultramolded worlds buggy build "purple monster's twin"
[quote="Prince Steve"I have the rear arms new in pack. $20 free shipping anywhere in the world. LMK [/quote]
those are truck arms... thanks for looking out tho
those are truck arms... thanks for looking out tho
- Prince Steve
- Approved Member
- Posts: 400
- Joined: Wed May 06, 2009 11:26 pm
- Location: New York
- Been thanked: 2 times
Re: ultramolded worlds buggy build "purple monster's twin"
those are truck arms... thanks for looking out tho[/quote]lowrydesign wrote:[quote="Prince Steve"I have the rear arms new in pack. $20 free shipping anywhere in the world. LMK
Yeah, you are right! They are truck arms ( I didn't notice, just knew I had RPM arms )
No problem, I am overloaded with parts anyways.
Besides you may have helped me unload them and hopefully another RC10talk faithful will get them?
AKA ( settin03 R/C hobbies and more ) on Ebay
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
Since being on this site I have found that I have too many parts and R/C Models. Please help me get rid of them.
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
Re: ultramolded worlds buggy build "purple monster's twin"
debating if i should put a shaved RPM truck trans in to the mix.... what do you guys think? the colors might look better...???
- Group B
- Approved Member
- Posts: 220
- Joined: Fri Dec 05, 2008 5:40 pm
- Location: S.F. East Bay/Tri-Valley
Re: ultramolded worlds buggy build "purple monster's twin"
Do it...do it.lowrydesign wrote:debating if i should put a shaved RPM truck trans in to the mix.... what do you guys think? the colors might look better...???
Associated: RC10T - "Baller Truck" ~ Red Bull SC10 - "Sucker Free" ~ RC10T - "Teh Shelfer"
lowrydesign celebrates the entire Tecnacraft wheel collection
I celebrate Worlds Chassis and Steering Enhancement Kits
lowrydesign celebrates the entire Tecnacraft wheel collection
I celebrate Worlds Chassis and Steering Enhancement Kits
Re: ultramolded worlds buggy build "purple monster's twin"
Nice looking build, Definitely would be good to see an RPM trans in there!
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: ultramolded worlds buggy build "purple monster's twin"
Wow Gregg, you haven't lost a second to build it and it's already coming along very nicely. Keep up the good work mate, it's so good to see a chassis that you had laying in a box finally taking shape
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
- SofaKing
- Approved Member
- Posts: 293
- Joined: Tue Mar 20, 2007 6:26 pm
- Location: Glendale, CA
- Has thanked: 32 times
- Been thanked: 5 times
Re: ultramolded worlds buggy build "purple monster's twin"
Hey Gregg, very cool build you've got going there. It's going to look great paired up with it's truck sibling. I say go with the RPM tranny, the white stealth looks good but the RPM will just tie the whole rear end together.
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
Re: ultramolded worlds buggy build "purple monster's twin"
yea laying in the box for maybe two minutes while i cleared off my bench...lol...no time to waste, especially since im going to boot camp in a few months...Asso_man! wrote:Wow Gregg, you haven't lost a second to build it and it's already coming along very nicely. Keep up the good work mate, it's so good to see a chassis that you had laying in a box finally taking shape
thanks buddy, i will have to order one up then..SofaKing wrote:Hey Gregg, very cool build you've got going there. It's going to look great paired up with it's truck sibling. I say go with the RPM tranny, the white stealth looks good but the RPM will just tie the whole rear end together.
- MOmo
- Approved Member
- Posts: 676
- Joined: Thu Jan 18, 2007 4:32 pm
- Location: Portland OR.
- Been thanked: 1 time
Re: ultramolded worlds buggy build "purple monster's twin"
Yeah,
Thanks to David, I too got the makings of an RPM buggy as well. Sadly its in a box along w/ another complete RPM car. I still need some Worlds arms or Klein's arms. But it will have to wait.
Great looking build. I started to build mine using the Blue screw kit, but I think I have some purple screws as well.
MOmo
Thanks to David, I too got the makings of an RPM buggy as well. Sadly its in a box along w/ another complete RPM car. I still need some Worlds arms or Klein's arms. But it will have to wait.
Great looking build. I started to build mine using the Blue screw kit, but I think I have some purple screws as well.
MOmo
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
Re: ultramolded worlds buggy build "purple monster's twin"
wana sell it??MOmo wrote:Yeah,
Thanks to David, I too got the makings of an RPM buggy as well. Sadly its in a box along w/ another complete RPM car. I still need some Worlds arms or Klein's arms. But it will have to wait.
Great looking build. I started to build mine using the Blue screw kit, but I think I have some purple screws as well.
MOmo
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 36 Replies
- 2552 Views
-
Last post by THEYTOOKMYTHUMB
-
- 36 Replies
- 2935 Views
-
Last post by lowrydesign
-
- 8 Replies
- 1133 Views
-
Last post by glastornjet73
-
- 3 Replies
- 766 Views
-
Last post by lmw94002
-
- 82 Replies
- 15343 Views
-
Last post by Lavigna
-
- 1 Replies
- 1053 Views
-
Last post by Lonestar
-
- 5 Replies
- 1399 Views
-
Last post by Mr. ED
-
- 2 Replies
- 1063 Views
-
Last post by the13bats
Who is online
Users browsing this forum: Amazon [Bot], Facebook [Bot] and 12 guests