LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2013.

[Jirka]

Incredible work again prp!

You should grind the gold color off from the front shock bodies but not from the "shock top cup".

Jirka

[scr8p]

don't forget to tighten the LF lower shock mount screw.

[prp]

I see the screw after make the pics...

For the Kyosho body shock, the original are coated with teflon:
Impossible Mission V ...

[adam lancia]

don't forget to tighten the LF lower shock mount screw.

There's one in every crowd

Awesome build! I'm always stunned by your attention to detail and the wide range of cars you've replicated. Simply impressive, thanks!!!!

[prp]

Thanks a lot

But too many project are stopped, because some parts are unavailable...

[Coelacanth]

don't forget to tighten the LF lower shock mount screw.

I wonder if you have the same ability as me...I can walk though a field of clovers and within 5 or 10 minutes, spot 4-leafs, 5-leafs, and one time even a 6-leaf clover. If not, you should try it sometime.

[isobarik]

PRP

Things to do

1. Pic of the underside with the front kick up

2. Put up the drawings of the chassi at fibrelyte homepage.

Otherwise it got to be the most awsome replice ever good work



mvh Isobarik

[prp]

There's no kick up from the chassis, he's cut just before the 2 screws of the rear arm mount.
The rear arm mount is cut to have 10° in more, I kkep the front of the ear arm mount and cut only the rear line.
You can compared with the pic below and one mount on your LAZER.
The 2 parts of the front bulkhead are fixed together by 4 small screws hex 2 mm in the arms mounts,
small notch at the end of the axle arm are made to keep the axle in place.
The upper plate is shorter than the original.
This chassis is a mix of the LAZER ZXR chassis 6 cells with 1 between the 2x3 packs, and the side are from the OPTIMA MID LWB to use the body set.

For Fybrelite, there's too many parts to prep to produced this chassis, but I can make it.

Thanks for the job...

[isobarik]

Got to get hold on to pargu and order some alu LA30
the chassi makes it really easy to have the optima mid custom body fit.

mvh isobarik

[prp]

More easy with the undertray, the body is not a problem...

[Charlie don't surf]

Pierre, that's a piece of art!

[ireg]

nice Lazer you have there

[prp]

Bottom and rear pics ad:









Help with LOSI JRX2 black rod end.....

[isobarik]

Have the drawings of the chassi sent to fibre-lyte
so we can have it made if one wants it.

The chassi is perfect for the zxs/optima mid custom body

mvh isobarik

[adam lancia]

Is it just my eyes or is the entire front gearbox hanging off the front of the chassis by 2 screws...?