25 YEARS OF THE RC10 (See page 1)
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Wed Nov 26, 2008 3:57 am
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 43 times
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
Thank you very much, I would love to use them but they are a little small can you send me a larger image? I would like to try to keep the same size images going!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
-
- Approved Member
- Posts: 802
- Joined: Tue Nov 08, 2011 2:43 pm
- Location: Mount Airy , Maryland
- Been thanked: 1 time
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
I am using windows photo gallery and the largest size it is allowing me is 500 x 375 Sorry...I have changed the maximum dimension to 900 and it is still only allowing them to be that size...Foiled again...
Late Edinger Gold Pan # 6010 .....Vintage Blackfoot....Electrix Circuit Stadium Truck ....Kyosho Ultima Pro XL
-
- Approved Member
- Posts: 105
- Joined: Thu May 31, 2012 11:18 pm
- Location: Reading, PA
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
Would it be possible to add which wing came with each version?
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Wed Nov 26, 2008 3:57 am
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 43 times
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
I thought they were the same until the CE and Team car? I may be wrong on this, if you have any info I would love to know?tommy2c wrote:Would it be possible to add which wing came with each version?
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
-
- Approved Member
- Posts: 105
- Joined: Thu May 31, 2012 11:18 pm
- Location: Reading, PA
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
OK, mainly I wasn't sure if the graphite came with the 6184 too. I was assuming so from the description of the CE showing the new wing but then I was thinking maybe it meant new as in a change from the graphite-CE and not necessarily new as in first time changed since the beginning. Thanks for the confirmation.
-
- Approved Member
- Posts: 93
- Joined: Wed Dec 05, 2012 2:54 am
- Location: chesterfield va
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
while reading through the thread i realized i had a near mint late CE without stealth holes, 4 hole ft shock tower, 6 gear trans, no body, A stamp chassis
my daughter and i are going to get this running, i am making her take it all apart and add a bearing kit
my daughter and i are going to get this running, i am making her take it all apart and add a bearing kit
Tom
-
- Regular Member
- Posts: 11
- Joined: Sat Nov 10, 2012 9:41 pm
- Location: California, USA
- Has thanked: 1 time
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
I recognize that car! #35/35. I got #5.
According to the seller, these cars were from a school in Quincy Il.
According to the seller, these cars were from a school in Quincy Il.
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Wed Nov 26, 2008 3:57 am
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 43 times
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
I think you guys have early CE's with dyed parts!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
-
- Regular Member
- Posts: 11
- Joined: Sat Nov 10, 2012 9:41 pm
- Location: California, USA
- Has thanked: 1 time
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
Yeah mine most definitely has dyed parts: battery holders, rear body mount, transmission case, wheels (i think), some of the ball cups too :]
- Charlie don't surf
- Approved Member
- Posts: 9049
- Joined: Tue Apr 08, 2008 6:44 pm
- Location: USA
- Has thanked: 103 times
- Been thanked: 162 times
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
Your correct Rodslotcarrod wrote:I thought they were the same until the CE and Team car? I may be wrong on this, if you have any info I would love to know?tommy2c wrote:Would it be possible to add which wing came with each version?
- GoMachV
- Approved Member
- Posts: 11758
- Joined: Mon Apr 30, 2012 2:31 am
- Location: Twin Falls, ID
- Has thanked: 912 times
- Been thanked: 2978 times
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
I remember seeing the eBay auction with the 6 or so cars that all had holes top and bottom on the 6 gear transmissions. Are these those cars? Looks like it in the pics
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Regular Member
- Posts: 11
- Joined: Sat Nov 10, 2012 9:41 pm
- Location: California, USA
- Has thanked: 1 time
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
yup it's got the extra holes. the bottom one tapped into something metal.. not sure... haven't cracked it open yet.
-
- Approved Member
- Posts: 93
- Joined: Wed Dec 05, 2012 2:54 am
- Location: chesterfield va
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
yep i got it on epay there were 38 i think. I got a futaba magnum jr radio and high speed servos that works awesome the only thing that was dyed on mine were some of the ball cups. the other bad, was diff shaft is stripped ( going to make it 4-40 thread ) still has bushings, mismatched springs, maybe they ran oval, right front bushing was toast. tires looked new only good for the shelf queen, hardened rears had flat spot and cracked from sitting.
also had a sticker that said property of Community H.S. Dist. #99 south
assigned to 10th period table 2 seat 3
68 signal and the names of the 2 people that used the buggy
as far as the screw in the top i did that way back in the day to spray some lube into the trans and the screw on the bottom of the pan i don't know, it doesn't go into the trans at all.
i got mine for about $60 but the last one went for about $90.
i got vintage novak esc , changed tires on rims(PITA!!!!!), bearings, batteries and body on the way.
battle of the 6 gears in the back yard
also had a sticker that said property of Community H.S. Dist. #99 south
assigned to 10th period table 2 seat 3
68 signal and the names of the 2 people that used the buggy
as far as the screw in the top i did that way back in the day to spray some lube into the trans and the screw on the bottom of the pan i don't know, it doesn't go into the trans at all.
i got mine for about $60 but the last one went for about $90.
i got vintage novak esc , changed tires on rims(PITA!!!!!), bearings, batteries and body on the way.
battle of the 6 gears in the back yard
Tom
-
- Approved Member
- Posts: 93
- Joined: Wed Dec 05, 2012 2:54 am
- Location: chesterfield va
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
well i have been getting mine RTR and put bearings throughout,... i think you are right everything is dyed black, but it looks good . when i was widening the hole for the outdrives ..... white at the core ahh well. the screw in the bottom was there to cover the hole they drilled in the transmission like the one at the top. i think this might have been done for lubrication since there were still bushings in the trans
Tom
- ASC6000
- Approved Member
- Posts: 52
- Joined: Tue Dec 21, 2010 9:13 pm
- Location: Meridian Idaho
Re: THE FIRST 25 YEARS OF THE RC10 (See page 1)
Hey all, I dug around but couldn't find a better place so I'll just ask.
Are there records of the production numbers of the various early kits ?
I ask because I still have the box from my first RC10, hence the screen name.
Edinger with the stamped end.
Any idea how many 6000 Edingers were produced ?
I would think the 6000 was more rare than the 6010 or 6016
No, I don't have the car. A few bits and pieces... and lots of memories.
thanks
Are there records of the production numbers of the various early kits ?
I ask because I still have the box from my first RC10, hence the screen name.
Edinger with the stamped end.
Any idea how many 6000 Edingers were produced ?
I would think the 6000 was more rare than the 6010 or 6016
No, I don't have the car. A few bits and pieces... and lots of memories.
thanks
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 1098 Views
-
Last post by trek
-
- 32 Replies
- 3731 Views
-
Last post by logikfive
-
- 47 Replies
- 17024 Views
-
Last post by WebSteve
-
- 32 Replies
- 6252 Views
-
Last post by erichevy
-
- 8 Replies
- 1433 Views
-
Last post by V12
-
- 7 Replies
- 781 Views
-
Last post by 59burst
-
- 12 Replies
- 2856 Views
-
Last post by Lonestar
-
- 12 Replies
- 2889 Views
-
Last post by Racersk
Who is online
Users browsing this forum: Ahrefs [Bot], CommonCrawl [Bot] and 0 guests