RC10 Factory Works MIP 93' Worlds Racer Restoration

Post by **Vintagemishal** » Sat Oct 26, 2013 3:01 pm

I figured I would start a build thread on my 4-10 Legend 4wd RC10. Any questions or comments are welcomed. I have not done a build thread on here, so here goes nothing. This will not be a 100% correct restoration due to parts being very difficult to find!

This is what I started with. A Craigslist diamond in the rough find:

Post by **romulus22** » Sat Oct 26, 2013 3:07 pm

Are you re using that chassis?

Post by **Vintagemishal** » Sat Oct 26, 2013 3:13 pm

I got it all blown apart to see what I had. The pan is an original A stamp gold pan. I am going to use this pan as it is the original. I don't like how it is cut in the back, but oh well. It is going to stay purple for now until I can decide what color to go.

Post by **Vintagemishal** » Sat Oct 26, 2013 4:45 pm

Here are the front knuckles and hubs. Whoever made these did a nice job! Just need some cleaning.

Post by **Vintagemishal** » Sat Oct 26, 2013 4:49 pm

Got the Stealth gearbox built with the MIP shaft for the belt. I am missing the rear belt pulley. It will look like the front one pictured. Please if anybody knows where I can get one of these, let me know!

Post by **Vintagemishal** » Sat Oct 26, 2013 4:51 pm

Front gear box is apart for inspection and cleaning. Everything looks great!

Post by **shodog** » Sat Oct 26, 2013 5:18 pm

Vintagemishal wrote:Front gear box is apart for inspection and cleaning. Everything looks great!

Looks good so far. Is it a one way for the front gear?

Post by **JPAE07** » Sat Oct 26, 2013 6:20 pm

Cool score.
Nice way to save some weight back there. Never seen one like that.

Looks like you've got a paperclip for protection back there.

Post by **GoMachV** » Sat Oct 26, 2013 6:39 pm

Amongst your search keywords include "mipet" which was the pet name for those hybrid pullies. I think they were considered not a cog and not a tooth

Post by **Vintagemishal** » Sat Oct 26, 2013 7:05 pm

The part # I need is a 4-105 Mipet. Jeff, you are correct sir!

Post by **Vintagemishal** » Sat Oct 26, 2013 7:07 pm

shodog wrote:
Vintagemishal wrote:Front gear box is apart for inspection and cleaning. Everything looks great!

Looks good so far. Is it a one way for the front gear?

The front outdrives are directional, so I believe it acts as a one way. Mine has the slipper assy as well.

Post by **Vintagemishal** » Sat Oct 26, 2013 7:09 pm

Here are my wheels and tires of choice. I narrowed a pair of rear Proline wheels and shaved down the centers for the front. Tires are Proline Champions.

Post by **Vintagemishal** » Sat Oct 26, 2013 7:12 pm

Did some parts cleaning today to find the best original parts I could. Got the front gearbox back together.

Post by **Vintagemishal** » Sat Oct 26, 2013 7:13 pm

Rear end coming together.........

Post by **Vintagemishal** » Sat Oct 26, 2013 7:15 pm

And finally, here is where I ended up today.

RC10Talk - The Net's Largest Vintage R/C Community

RC10 Factory Works MIP 93' Worlds Racer Restoration

RC10 Factory Works MIP 93' Worlds Racer Restoration

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Re: RC10 MIP 4-10 Legend Build

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online