Dhawk and racing
- abailey21
- Approved Member
- Posts: 273
- Joined: Sun Feb 13, 2011 8:28 am
- Location: Leander TX
- Been thanked: 2 times
Dhawk and racing
Hey guys
So I have an absolute F-ton of RC10's I've been collecting over the past few years. With my job and the travel I haven't had any time to race let alone the couple days a year I get too wrench. Even though a basher worlds car out here in west Africa would be about the highest level of awesome right now.
So I have like 8 projects running, all of them started as rere worlds cars, Most are just updating to RC Carbon shock towers but the one racer I want to finish and actually hit the track with is a rere with most all the JC aftermarket stuff. I have the bellcranks, nose tubes, motor plate. I have a Reedy 17.5, Blackbox 800 all the crap I need to get up and running.
I've thought of doing a Dhawk build and I've read all about the up's and down's of their parts, fit and what not so I know what I'd be getting into but I'm considering the rear mounts for my runner. I know this is a weak spot and I know by installing them I'm setting myself up for broken rear arms and rear hub carriers instead of the rear mounts.
But is anyone racing with these or am I gonna be the only one?
I know I know I wanna post pics of the ever expanding fleet but my cars are 10,000 miles away, yes I'm as sad as you are
So I have an absolute F-ton of RC10's I've been collecting over the past few years. With my job and the travel I haven't had any time to race let alone the couple days a year I get too wrench. Even though a basher worlds car out here in west Africa would be about the highest level of awesome right now.
So I have like 8 projects running, all of them started as rere worlds cars, Most are just updating to RC Carbon shock towers but the one racer I want to finish and actually hit the track with is a rere with most all the JC aftermarket stuff. I have the bellcranks, nose tubes, motor plate. I have a Reedy 17.5, Blackbox 800 all the crap I need to get up and running.
I've thought of doing a Dhawk build and I've read all about the up's and down's of their parts, fit and what not so I know what I'd be getting into but I'm considering the rear mounts for my runner. I know this is a weak spot and I know by installing them I'm setting myself up for broken rear arms and rear hub carriers instead of the rear mounts.
But is anyone racing with these or am I gonna be the only one?
I know I know I wanna post pics of the ever expanding fleet but my cars are 10,000 miles away, yes I'm as sad as you are
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: Dhawk and racing
On my Classic I used the Dhawk rear mounts with RPM arms. I found that I needed to grind off a portion of the arm to get it to fit because the mounts are slightly bigger than stock.
the Dhawk arms and mounts work together perfectly
the Dhawk arms and mounts work together perfectly
- abailey21
- Approved Member
- Posts: 273
- Joined: Sun Feb 13, 2011 8:28 am
- Location: Leander TX
- Been thanked: 2 times
Re: Dhawk and racing
right on, thanks man
Still not sure I wanna go that route, I may wait but a full set of Dhawk stuff and build an all green anodized white powder coat tub still. Just not sure
Still not sure I wanna go that route, I may wait but a full set of Dhawk stuff and build an all green anodized white powder coat tub still. Just not sure
- yellowdatsun
- Approved Member
- Posts: 844
- Joined: Mon Jul 20, 2015 1:15 pm
- Location: Phx, AZ
Re: Dhawk and racing
Aluminum is very heavy compared to plastic, and also doesn't bend in a crash. Therefore the car will be heavy, and parts will break. Trust me, I've tried it. I have RPM arms and kept breaking inner hinge blocks, so I went to aluminum, and now it just shears bolts off. You have to leave a few flexible plastic parts on, otherwise when you crash you'll have a bumch of sheared or permanently bent parts. The weight won't help you either. I do use a few aluminum parts, but not a lot, and definitely not in parts like arms, or big parts that weigh a ton.
- abailey21
- Approved Member
- Posts: 273
- Joined: Sun Feb 13, 2011 8:28 am
- Location: Leander TX
- Been thanked: 2 times
Re: Dhawk and racing
Oh I know the normal downsides of using aluminum parts thats why I was only gonna get the rear arm mounts cause that just seems to be the one weak area
Guess I could improve my driving???????
Guess I could improve my driving???????
- yellowdatsun
- Approved Member
- Posts: 844
- Joined: Mon Jul 20, 2015 1:15 pm
- Location: Phx, AZ
Re: Dhawk and racing
Rear arm mounts are one of the areas where aluminum is a really good idea. I have them on mine. Go tired of breaking arm mounts. I have the front too.
- RC10th
- Approved Member
- Posts: 4310
- Joined: Sat Feb 16, 2013 9:51 am
- Location: Australia
- Has thanked: 40 times
- Been thanked: 1045 times
Re: Dhawk and racing
I think the arm mounts will be fine for racing. Make sure you replace the re-re arm mount screws with original ones or others otherwise your setting yourself up for broken screws in the mounts.
I was old school - when old school wasn't cool !
- GoMachV
- Super Member
- Posts: 11360
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 832 times
- Been thanked: 2470 times
Re: Dhawk and racing
Yeah the stock green hardware on the rere are especially delicate. Team KNK makes a nice stainless steel screw set for about $20 that is very nice for runners
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- yellowdatsun
- Approved Member
- Posts: 844
- Joined: Mon Jul 20, 2015 1:15 pm
- Location: Phx, AZ
Re: Dhawk and racing
I ended up putting stainless screws in place of the green screws for the trailing arm hinge mounts.
Once I had the aluminum trailing mounts installed, I sheared a couple green bolts, got fed up with that, and got the stainless bolts. Haven't broken one since.
Once I had the aluminum trailing mounts installed, I sheared a couple green bolts, got fed up with that, and got the stainless bolts. Haven't broken one since.
-
- Approved Member
- Posts: 41
- Joined: Fri Sep 04, 2015 6:18 pm
- Location: Pennsylvania
- Been thanked: 1 time
Re: Dhawk and racing
yellowdatsun wrote:Aluminum is very heavy compared to plastic, and also doesn't bend in a crash. Therefore the car will be heavy, and parts will break. Trust me, I've tried it. I have RPM arms and kept breaking inner hinge blocks, so I went to aluminum, and now it just shears bolts off. You have to leave a few flexible plastic parts on, otherwise when you crash you'll have a bumch of sheared or permanently bent parts. The weight won't help you either. I do use a few aluminum parts, but not a lot, and definitely not in parts like arms, or big parts that weigh a ton.
Very well stated.
My first time building a re-re World's got a bit out of control and turned into a shelf queen because of Dhawk parts . The fit and machining are amazing and they do look great. The Dhawk gearbox cases are very nice and I probably going to convert my bashers to them at some point. That is about all I would put on something that I know is going to get run time.
Not a racer and I only bash, but what yellowdatsun said is very sound advice for any type of runner.
- GoMachV
- Super Member
- Posts: 11360
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 832 times
- Been thanked: 2470 times
Re: Dhawk and racing
I hear ya guys, this is how my Dhawk ended up. It's hard to stop!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- abailey21
- Approved Member
- Posts: 273
- Joined: Sun Feb 13, 2011 8:28 am
- Location: Leander TX
- Been thanked: 2 times
Re: Dhawk and racing
GoMachV wrote:Yeah the stock green hardware on the rere are especially delicate. Team KNK makes a nice stainless steel screw set for about $20 that is very nice for runners
Yeah I have KNK screws on all my builds...speaking of that I need to pick up a couple more sets
-
- Regular Member
- Posts: 15
- Joined: Tue May 10, 2016 9:23 pm
- Been thanked: 1 time
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 1376 Views
-
Last post by shodog
-
- 9 Replies
- 2234 Views
-
Last post by AustinZ
-
- 15 Replies
- 2967 Views
-
Last post by killswitch
-
- 5 Replies
- 1153 Views
-
Last post by Sixtysixdeuce
-
- 3 Replies
- 996 Views
-
Last post by Skeetie96
-
- 2 Replies
- 645 Views
-
Last post by XLR8
-
- 3 Replies
- 637 Views
-
Last post by shodog
-
- 12 Replies
- 3154 Views
-
Last post by blubblood
Who is online
Users browsing this forum: Ahrefs [Bot], DotNetDotCom.org [Bot], RC10th and 17 guests