Just something for fun. A&L arms on a custom chassis with some modern, some old school, and lots of A&L
I hope to be able to run it this weekend. It will just be on foams around the street
Attachments
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
There is a buggy chassis on the router waiting for me to release it from its double sided tape prison. I will get it built up soon.
Facebook is just soooooo much easier to post pics. Here they are always too big, incorrect format, blah blah blah. So much easier to search stuff here tho!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
GoMachV wrote: ↑Fri Apr 21, 2017 3:55 pm
Thanks guys! and you too Todd haha
There is a buggy chassis on the router waiting for me to release it from its double sided tape prison. I will get it built up soon.
Facebook is just soooooo much easier to post pics. Here they are always too big, incorrect format, blah blah blah. So much easier to search stuff here tho!
And b/c FB is so easy, there is so much crap on there...
The challenge behind posting a pic on a forum is a natural quality filter
And by Golly that trailing arm 10T looks good!!!
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
GoMachV wrote: ↑Fri Apr 21, 2017 3:55 pm
THere they are always too big, incorrect format, blah blah blah. So much easier to search stuff here tho!
Above is one of the two reasons I didn't post it here for you...the other reason is it wasn't my place to second guess your Want to post it here or not. At least here it will live on til the board finally dries up.
Todd
Peace and professionlism.....Kabunga signing off!!!
Oh you could have, as long as you keep those special pics I sent you a secret
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Didn't get too far on the buggy today, but I found out I can't put the front posts where I wanted to. Oh well. It will look a lot like this
Attachments
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Not sure if I can squeeze the plastic universal joints in there tho. Was hoping to use the bone conversion axles but it's not looking promising. I'm setting all these up to run stock trans as well as Lethal Weapon.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
First I want to say, there is no real reason to do this other than I just like to fabricate stuff. I'm shaping it just like the stock chassis to avoid looking like or copying the A-Main chassis. The top plate and trans brace will be made out of...
Last post
Cuts easily with a jigsaw, dremel, etc but make sure to wear a mask. It's very bad to inhale the dust
Oh yeah I've worked with the layers and resin before...total mess! lol.
hi guy's i was wondering what difference does the trailing arm makes on the track.ive always run cars whit a-arm and i wonder if it does make more or less
traction.i know that it must have less side bite because of the lack of camber gain but how...
Last post
thanks alot. 8) i should have used the search button :oops: :oops: sorry about that.realy interesting thread thought.
Why have I bought this :? I think it's because you guys kept snapping them up so I figure they must be a decent deal. I have no donor parts left to build it so I'm going to have to start all over again, this one could be a real long drawn out...
Last post
i wish i knew you had rc-10 towers when i ordered the lethal weapon parts from you a week ago i would have got a set. you didnt happen to send out the missing tranny brace yet, if so wait and i will send money for towers too.
Work in progress.
Chassis from Jeff ´Factory Works`
Scorpion rear arms and wheels
Original 6 gear.
I´m not sure about the nosepiece but it was old and black to begin with :-)
Rest is RC10 Classic parts, with a little help from an Ultima RB6
Last post
Many Thanks for the kind words.
ummmm, Apple Pie... Now I´m lusting for cake :mrgreen:
And Yes, they´re Scorpion wheels.
Through my eBay fun, I have ended up with a spare set of trailing arms set up (Andy's/S&K) and have this question to the guys who have actually run trailing arms....
What does it do to the handling of the car? Too much rear traction, making the car...
Last post
I think you will find that most molded graphite tubs will lack the strength for a suspension mount of that variety. Specifically, I think you will have to grind off the edge of the tub to get the suspension block to fit, and I don't think the...
I have been wanting to start a project to race on a large MX style track predominantly used by 1/8 cars and trucks. I love the way a trailing arm car runs and handles. The track is loose and rough with huge jumps. It will be a 10th scale buggy built...
Last post
What I found with my trailingarm racer was that it's difficult to get enough suspension travel without running into extreme angle or angle changes.
I Think the solution would be to use longer arms but don't have the tools to make something descent.