anyone ever see this site? MIP 4X400, SP2 in stock?!

[Hcp22]

Don't get me wrong $165 for a complete set of MRP Scorpion arms isn't a terrible price...I'm just very cheap.

He doesn't seem to know what everything he's got is but he smells money on them.

And I was too late…

[teman]

I wish I could grab these, but it's a BIT MUCH for me
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_141&product_id=1304

[cobalta70]

I know the feeling. I would love to grab this, but it's way out of my price range:
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_212&product_id=1145

It looks like they had the matching kit for the rear too, but someone already snatched it up:
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_212&product_id=1146

[flipwils11]

I think I need these, lol.

http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_217&product_id=1264

[teman]

I know the feeling. I would love to grab this, but it's way out of my price range:
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_212&product_id=1145

It looks like they had the matching kit for the rear too, but someone already snatched it up:
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_212&product_id=1146

Ditto, I didn't see that If it was just 1/2 that total I'd do it You forgot this gem though...
RPM No. 7020 Front Suspension Mount Black for RC-10
http://johnshobbiesandcrafts.com/index.php?route=product/product&path=1_3_212&product_id=1398
I have acquired two so far, one on the graphite since I was breaking mounts no more breaking mounts now
and the minty other on the Trinity/CC 10 20 bux I'd say is fair, not 49 sheesh

[GoMachV]

You could always try an offer he has been quick to reply to me in emails

[Phin]

$129 for the RPM front end kit is about right on price seeing as it's the whole kit...arms, bulkhead, tower, springs, and spring clips. I think the front kick-up is in the pack too but I'm not sure.

[cobalta70]

$129 for the RPM front end kit is about right on price seeing as it's the whole kit...arms, bulkhead, tower, springs, and spring clips. I think the front kick-up is in the pack too but I'm not sure.

I don't disagree, as I have seen the arms alone go for a decent enough amount. Part of the issue is that if I paid that for it I would have a hard time opening up the package.

[Y'ernat Al]

Looking at that 4X-400 kit again...that's for the SRB/Sandscorcher not the RC10 isn't it?

Yes it is. He is misleading by saying it's RC10. It isn't.

[GoMachV]

He has other stuff like that too...I think he just doesn't know. The front dog bones are listed as "braces" lol

[Phin]

...Part of the issue is that if I paid that for it I would have a hard time opening up the package.

That I can commiserate with.

...
Yes it is. He is misleading by saying it's RC10. It isn't.

Honestly I think it makes it a better deal. The brake cable version is rarer than the belt or chain version. It can be adapted to the RC10 but I don't know if it'll work with the SP-1 trans. May need the older MIP trans with the special motor plate adapter to fit it on a 10.

[vintage88]

according to the kit in front of me now... they are called braces

and it can be adapted with the t-1 trans i have the kit with the instructions from mip in a large lot i picked up last weekend...


(and yes i am about to have a large sale with the stuff to recoop some of my money i spent...)

[flipwils11]

Success! It came today.

[GoMachV]

Nice! He said he had a hobby store that closed in 99. These are the remaining stock

[slotcarrod]

Good score dude!