GoMachV's Pin Router thread (for reproducing 2d parts)

Feel free to discuss anything NON-R/C related that is on your mind.

Moderators: scr8p, klavy69

Post Reply
User avatar
klavy69
Moderator
Posts: 5146
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 556 times
Been thanked: 262 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by klavy69 »

gomachv wrote:I'm still trying to see how that benefits me :mrgreen:
by making someone else happy :mrgreen:

Todd
Peace and professionlism.....Kabunga signing off!!!
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

klavy69 wrote:there is a front shocktower behind all those spring clips :?:
They are front springs on rear shocks so that's the only way they'd work! Rear spring rates are all wrong for the front. I just like the silly tall shocks up front.
Raborn Racing Originals Shapeways store
Top
User avatar
klavy69
Moderator
Posts: 5146
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 556 times
Been thanked: 262 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by klavy69 »

Yeah, was just kidding you. Kinda figured what they were when I seen all the clips and read the tower was taller. You guys are doing some great work. Keep it up and start producing some of the for the b/s/t area 8)

Todd
Peace and professionlism.....Kabunga signing off!!!
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.
Raborn Racing Originals Shapeways store
Top
User avatar
JK Racing
Super Member
Posts: 4603
Joined: Thu Jul 19, 2007 2:32 pm
Location: Placentia, CA
Has thanked: 103 times
Been thanked: 200 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by JK Racing »

fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.
jrx pro rear tower with b4 wing holes
"worlds" front for .89
"worlds? rear with b4 holes

losi in black, ae towers in natural or greenish/yellowish color
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Top
User avatar
Incredible_Serious
Approved Member
Posts: 3419
Joined: Tue Jan 29, 2008 12:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1386 times
Been thanked: 850 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by Incredible_Serious »

klavy69 wrote:
gomachv wrote:I'm still trying to see how that benefits me :mrgreen:
by making someone else happy :mrgreen:

Todd
[youtube]snsj0L8-4Iw[/youtube]

:lol: :lol: :lol: :lol: :lol: :lol:

Nice undies, GM5.....

:lol: :lol: :lol: :lol:
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!
Top
User avatar
Incredible_Serious
Approved Member
Posts: 3419
Joined: Tue Jan 29, 2008 12:09 am
Location: Melbourne, Victoria, Australia
Has thanked: 1386 times
Been thanked: 850 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by Incredible_Serious »

fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

I'd like some PB Mini Mustang chassis plates...... please.........

Three or four should do...... :shock:

Alex
Osiris is the key.

"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken

Look out for Todd K. - he's a convicted serial killer!!!
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

I can do those. I need to order more material.
JK Racing wrote:
fredswain wrote:Gladly. What do you want?
I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.
jrx pro rear tower with b4 wing holes
"worlds" front for .89
"worlds? rear with b4 holes

losi in black, ae towers in natural or greenish/yellowish color
Raborn Racing Originals Shapeways store
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

If I had an original to copy I could do it.
Incredible_Serious wrote:
fredswain wrote:Gladly. What do you want?

I'm about to buy chassis blanks with the nose kick so I can start doing full chassis.

I'd like some PB Mini Mustang chassis plates...... please.........

Three or four should do...... :shock:

Alex
Raborn Racing Originals Shapeways store
Top
User avatar
klavy69
Moderator
Posts: 5146
Joined: Thu May 29, 2008 4:11 pm
Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
Has thanked: 556 times
Been thanked: 262 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by klavy69 »

Incredible_Serious wrote: :lol: :lol: :lol: :lol: :lol: :lol:

Nice undies, GM5.....

:lol: :lol: :lol: :lol:
is that sarcasm...?

:mrgreen:
Peace and professionlism.....Kabunga signing off!!!
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

Here it is. My very first chassis. Once I get comfortable with these I'll start working on chassis with a built in kick.
Attachments
chassis1.jpg
Raborn Racing Originals Shapeways store
Top
User avatar
GoMachV
Super Member
Posts: 11312
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 818 times
Been thanked: 2399 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by GoMachV »

I like it 8)
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Top
fredswain
Approved Member
Posts: 1167
Joined: Fri Mar 11, 2011 4:20 pm
Location: Houston
Been thanked: 4 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by fredswain »

A countersink bit and a drill press really help make things go quickly. This whole thing took me about half an hour. Not too bad for the first one. There is actually more to this one than is shown though. It will be a modern design with additional side pieces that stack on top of each other. Look at the X-Factory X6^3 pictures to see what I mean. My old Atomic Carbon CR2 chassis was done the same way. Very stiff and very strong. This one is going on my friend Chad's car. He's getting the shock towers I made too.
Raborn Racing Originals Shapeways store
Top
User avatar
uniquenamehere
Approved Member
Posts: 553
Joined: Tue Jun 07, 2011 6:34 am
Location: Ontario, Canada
Been thanked: 2 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by uniquenamehere »

What cutters are you using? And how long do they last?

I'm thinking about copying your design... my brother in law has a lathe and can probably whip me up a pin like you got.
Top
User avatar
GoMachV
Super Member
Posts: 11312
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 818 times
Been thanked: 2399 times

Re: GoMachV's Pin Router thread (for reproducing 2d parts)

Post by GoMachV »

The cutters I have a just carbide cutters from the PC board industry. Found em on eBay- need to find more! I get quite a bit of use out of em, probably 10 chassis or so. I cut so many small parts its hard to keep count
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • GoMachV's pin router v4: now pinless!
    by GoMachV » » in Off-Topic / Chit-Chat
    71 Replies
    6561 Views
    Last post by Halgar
  • Reproducing Vintage parts..
    by MOmo » » in RC10 Buggy Forum
    14 Replies
    1519 Views
    Last post by Jeep-Power
  • GoMachV’s 3d printing thread
    by GoMachV » » in 3D Printing
    159 Replies
    17403 Views
    Last post by GoMachV
  • GoMachv's Nikko Dictator thread
    by GoMachV » » in Nikko / Toy Grade Forum
    21 Replies
    4160 Views
    Last post by GoMachV
  • well here u go gomachv u raise well 11/25 parts pics added
    by farmer » » in Off-Topic / Chit-Chat
    19 Replies
    1754 Views
    Last post by GoMachV
  • Arms with "Wide Inner Hinge Pin" Thread??
    by MONSTER » » in Temple's RC10 Tech Forum
    8 Replies
    953 Views
    Last post by MONSTER
  • The broken parts thread
    by RC10th » » in Off-Topic / Chit-Chat
    18 Replies
    1453 Views
    Last post by SFC K
  • Reproducing decals
    by BillKrueger » » in The Paint / Body Shop
    7 Replies
    1275 Views
    Last post by TamiyaTony

Return to “Off-Topic / Chit-Chat”

Who is online

Users browsing this forum: No registered users and 35 guests