I'm sure this has been asked before but I'm feeling lazy right now Lol. Which big bores fit the 10t? Can someone post a pic of a set of any shocks on the back side of the tower?
Dangerous thing, but I got to thinking today while browsing eBay. Has anyone tried fitting current 10th scale big bore springs to older 8th scale shocks...? I know most were a 13mm inner bore but I wonder if the spring diameters would be close...
I've been wanting to run big bore springs on my JRX Pro for a while due to the variety of spring rates available. I've got tons of big bore springs and this way is far cheaper than converting the car to big bore shocks. I modeled these up and am...
Last post
I've completed a model tree for the big bore spring adapters for standard bore Losi shocks. It has a set of 4 of each part. There are 4 collars, for those who have the smooth bodies. There are 4 bottoms, for all shocks. Finally, there are 4 rings....
Hey guys, I’m setting up an RC10 to run at my local Clay track. I plan on putting some big bore shocks on it that I took off of a B5m. I’m looking for some basic set up Tips since I know several of you guys have run big bore shocks on your RC10s....
Last post
I need to test more but, I used shocks from a B5 with factory works towers. I used kit pistons with 30W oil. My suggestion is to measure your current droop setup and match that with your new setup. I liked green springs front and rear but, tune to...
I know someone has probably asked before but what shocks off the new associated models will fit the rc10t? Are they bolt on or do I need to make modifications?
Last post
A better option might be to run these on the front.
That's the stock 10T bottom ends... I don't think it will alleviate the issue. But then again, one has to try to see how it all nets out.
Yeah!!!!!!! I love my Kyosho Velvet Big Bores on my 44.1, but I miss the familarity of the AE piston combos Looking forward to these
Hopefully they learned something from Kyosho here! For the most part, Kyosho has always had the really good...
Last post
I've been using the TLR22 big bores on my Gold Pan, I really like the way it feels. I just put the gold shocks back on so I can do some back to back testing. Last time I did back to back testing, it was a very hot outdoor blue groove track. Really...
Anyone who runs modern yokomo x shocks know how to get the o rings separately? I have only seen the shaft o rings and adjustment nut o rings available separately but not the top caps and bottom caps.. I have looked at the team associated big bore...
Last post
Yeah thanks mate I am gonna get the v2 upgrade for the bottom cap myself when I get some spare coin.. Thanks for sharing about the shaft o rings mate.
I just scored a set of B5 big bores on eBay. I notice on the modern cars they mount behind the front shock tower. Is this necessary on the WOIN setup with extended nose? Is there a performance gain or geometry gain from this? I have seen guys having...