Modernized Goldpan, narrow rear wheel base

Moderators: scr8p, klavy69

7 posts • Page 1 of 1

BACK_AT_IT: Approved Member; Posts: 32; Joined: Sat Oct 03, 2015 12:36 am; Location: Calgary, Canada; Been thanked: 1 time

Modernized Goldpan, narrow rear wheel base

Quote

Post by BACK_AT_IT » Mon Sep 20, 2021 11:10 pm

Been fiddling with rear wheel base for a while but still not satisfied. Found this pic online which may be a solution. I think they installed B4 rear arms/hubs maybe? Any help would be appreciated. Part numbers would be wonderful from the cva bones out to the rims.
Thx!!

Attachments

: Goldpan rear set up

juicedcoupe: Super Member; Posts: 2975; Joined: Sun Aug 16, 2020 4:05 pm; Location: Pascagoula, MS; Has thanked: 229 times; Been thanked: 1737 times

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by juicedcoupe » Mon Sep 20, 2021 11:57 pm

Those are Klein rear arms on that car, similar to the RPM Worlds arms. They are longer than standard RC10 arms. Depending on how you mount them, the axle can be positioned in the factory location or extended out.

Do some searching on WOIN (whats old is new) cars around here, you will find plenty of options.

Always looking for new and interesting ways to waste money.

scr8p: Administrator; Posts: 16521; Joined: Tue Feb 07, 2006 9:46 pm; Location: Northampton, PA; Has thanked: 28 times; Been thanked: 955 times

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by scr8p » Tue Sep 21, 2021 5:56 am

https://www.rc10talk.com/viewtopic.php?f=38&t=10403

Flashback R/C Products

My Gallery

BACK_AT_IT: Approved Member; Posts: 32; Joined: Sat Oct 03, 2015 12:36 am; Location: Calgary, Canada; Been thanked: 1 time

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by BACK_AT_IT » Tue Sep 21, 2021 3:05 pm

Thx!

TRX-1-3: Super Member; Posts: 1727; Joined: Sat Mar 29, 2014 12:13 pm; Location: USAG Humphreys, South Korea; Has thanked: 1370 times; Been thanked: 749 times

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by TRX-1-3 » Tue Sep 21, 2021 9:41 pm

Hope you're doin' something fun.

MarkyDents: Approved Member; Posts: 1019; Joined: Sun Jan 10, 2021 11:52 am; Location: Staten Island, N.Y.; Has thanked: 1339 times; Been thanked: 509 times

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by MarkyDents » Tue Sep 21, 2021 9:49 pm

something very familiar about this…………..

Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out

BACK_AT_IT: Approved Member; Posts: 32; Joined: Sat Oct 03, 2015 12:36 am; Location: Calgary, Canada; Been thanked: 1 time

Re: Modernized Goldpan, narrow rear wheel base

Quote

Post by BACK_AT_IT » Wed Sep 22, 2021 1:58 pm

Thanks, I appreciate the correction and love the sketch!

Post Reply

7 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

Wheel base RC10CE vs Worlds Car

Last post by mk-Zero « Tue Aug 27, 2019 11:10 am
Posted in Temple's RC10 Tech Forum
Replies: 38
by BACK_AT_IT » Fri May 19, 2017 1:34 am » in Temple's RC10 Tech Forum
1

2

3
First post

I'm rebuilding and modernizing a RC10CE (last produced gold pan) which I bought in pretty rough shape on eBay. I've put modern 2.2 wheels on it modern electronics (hobbywing, skyfly) and its running well. I am looking to replace the old rc10 dog...

Last post

If you have that blue anodized cone-shaped washer that comes with the Worlds CVA conversion kit put that inboard and maybe like 2 of the 3 thin washers, then put the 3rd outboard. Annoying that you have to do this, but works like a charm.

I need to...
38 Replies

7389 Views

Last post by mk-Zero
Tue Aug 27, 2019 11:10 am
Another one, usage for a3030 narrow rear axle?

Last post by mytimac « Sat Apr 23, 2011 5:18 pm
Posted in Losi Forum
Replies: 6
by mytimac » Thu Apr 21, 2011 2:29 pm » in Losi Forum

First post

Can you tell I am going through a bunch of parts?
Tried google and can't find answer
I have yellow tag package of a3030. Says NEW Narrow Rear Axle Set.
Any ideas on this one? Later XX models, or maybe XX4 or Street Weapon.
Looks to be an optional...

Last post

Ok, the clue was in the picture. The thin skims.
The a3030 has the pin hole closer to the hub. Then you can't use that thicker spacer and need the thin skims instead. This must have been used to put different rims on the older cars and maybe stay...

6 Replies

988 Views

Last post by mytimac
Sat Apr 23, 2011 5:18 pm
why do 1/8 buggies run narrow rear wheels and tires?

Last post by flipwils11 « Thu Apr 11, 2013 10:56 am
Posted in Off-Topic / Chit-Chat
Replies: 20
by Mr. ED » Tue Apr 09, 2013 10:36 pm » in Off-Topic / Chit-Chat
1

2
First post

As the title says: why do 1/8 buggies run narrow tires and wheels in the rear?

back in the days you would see 1/10 buggies with wide fronts, but now all have narrow fronts and wide rears. Trucks are wide in the front and back and 1/8 buggies are...

Last post

I do prefer the staggered look even on 4wd. At least on full scale cars, a narrower front tire tends to induce understeer.

Agreed on truggies, those things would be voted least likely for shelfer status in 20 years, beating out the RTR Slash.
20 Replies

2521 Views

Last post by flipwils11
Thu Apr 11, 2013 10:56 am
RC10Lss Narrow TRC Pro Lite rear radials.

Last post by sandkil « Mon Jan 25, 2016 2:13 am
Posted in Temple's RC10 Tech Forum
Replies: 13
by sandkil » Sun Jan 24, 2016 8:49 am » in Temple's RC10 Tech Forum

First post

So I'm sitting here looking through old mags and was trying to figure out how to use TRC narrow pro lite rear tires on a RC10Lss to maintain 200mm width.
What hubs and axel do you use?
Saw an old article on a AE/HPI insane speed run car and it had...

Last post

Thanks for all the help. I appreciate it (y)

13 Replies

1403 Views

Last post by sandkil
Mon Jan 25, 2016 2:13 am
RPM Narrow Rear End Outer Hinge Pins

Last post by scr8p « Sun Jan 24, 2016 12:20 am
Posted in RC10 Buggy Forum
Replies: 1
by JOHNBOY74 » Sat Jan 23, 2016 10:18 pm » in RC10 Buggy Forum

First post

Does anybody know which outer hinge pins go in the RPM narrow rear end kit. 6381 pins are too long and will hit my wheels if pushed to one side. I have another worlds with the RPM kit and the pins fit flush with the end but it has been years since I...

Last post

Truck outers, or just put a spacer on either side to take up the space.

1 Replies

600 Views

Last post by scr8p
Sun Jan 24, 2016 12:20 am
Making a set of Duratrax Nitro Rear Rims fit a RC-10 Goldpan

Last post by SteveK « Fri Oct 22, 2010 11:55 pm
Posted in Temple's RC10 Tech Forum
Replies: 1
by clhuke64 » Sun Oct 17, 2010 3:58 pm » in Temple's RC10 Tech Forum

First post

I just purchased a set of duratrax bx front rims and nitro rear rims for my RC-10, like scr8p recommended in his topic .*Parts needed to run modern 2.2 rims/tires on your rc10* . I followed what SteveK did, in his reply on this topic and did a...

Last post

Cool tutorial. I had to ream out the center of my Duratrax wheels to fit the 3/16 axles too.

I actually thought about taking all the 1/4 axles to a machine shop and getting them turned down to 3/16 , but I think they are too small near the threads...

1 Replies

519 Views

Last post by SteveK
Fri Oct 22, 2010 11:55 pm
XX-4 rear wheel question / Help

Last post by DerbyDan « Tue Mar 02, 2021 10:15 am
Posted in Losi Forum
Replies: 3
by Wizemanne » Sat Feb 27, 2021 1:42 pm » in Losi Forum

First post

Are all the rear wheels for XX, XX-4 and XXX compatible? I just got an XX-4 and I have part # A-7141 yellow 5 spoke rear wheel which fits as it should but I just got part A-7105 rear wheel white and A-7105 is up against the rear hub and doesn't...

Last post

I use the wider XXX wheels on my DoubleX buggy (the modern tyres sit better on them) I've trimmed off the top-most 'lug' on the hubs, its a hole/camber position I've never used before.

3 Replies

708 Views

Last post by DerbyDan
Tue Mar 02, 2021 10:15 am
Rear wheel compatibility, B4 and B3

Last post by duckhead « Sun Oct 18, 2020 10:53 pm
Posted in RC10 Buggy Forum
Replies: 12
by jkranz » Thu Sep 24, 2020 9:16 am » in RC10 Buggy Forum

First post

Sorry if this question has come up before, I couldn't find it in a search here... does anyone know if there is a major difference in the rear wheels of the B4 and B3? I'm rebuilding a B3 and have sourced parts to be able to use B4 front wheels......

Last post

Sport kits had 1/4 axles.

Ahh, that makes sense, forgot about the Sports kits! Thanks! :mrgreen:

12 Replies

1379 Views

Last post by duckhead
Sun Oct 18, 2020 10:53 pm

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: breizhator2 and 3 guests