Gomachv's 4wd RC10 project- finished!

[GoMachV]

As I mentioned before in another post, there are only a handful of pieces needed, a couple dremel cuts, and the rest should be available very soon from associated (trans). I'm looking forward to the next build

[marlo]

And I thought you were going to hit the curb

[GoMachV]

I hit the curb quite a few times, it climbed right up it! Lol. It glitched out of control into the neighbors yard once, and I flipped it in the gravel and popped off a ball joint. Oh yes, it was tested. I just didn't video my stupidity lol!

[Vintagemishal]

What about tensioning like my MIP car? You can adjust a nut at the end of the front chassis braces?

[GoMachV]

I've never liked that design personally it flexes the nose, albeit not much but it just seems awkward to make an adjustment that way.

My plan won't use a pulley, I just don't know if I have enough room. It will not be on this one, it will be on the next. It would take a lot of redoing on this one and I'm waiting for a piece I'm having made

[scr8p]

that turned out pretty cool, jeff. but you have to name it before it hits ebay.

[GoMachV]

For the sake of eBay I'm leaning towards "same as MIP 4-10 legend" lmfao

Or Miley. But who's gonna be searching for "Miley"? Lol

I am really excited to start the V2 after running this one.

[Y'ernat Al]

For the sake of eBay I'm leaning towards "same as MIP 4-10 legend" lmfao

Or Miley. But who's gonna be searching for "Miley"? Lol

I am really excited to start the V2 after running this one.

How about the RC10 Mach IV. It alludes to the creator, or at least his alter ego/screen id.

And your next one can be the Mach IV2?

[85Edinger]

Name suggestion: the Dual Dominator.

[85Edinger]

The Belt-drive Barnstormer?

[85Edinger]

The Two-Tranny Trumper?

[THE H.P FREAK]

HI!... Shaniqua....

[rraeford]

My wife's Honda Civic is named Shaniqua. Maybe she'll let me buy it...

[GoMachV]

I found a body in my box-O-bodies so I decided to mount it up. It's a TBG mirage and I see what you guys mean, what a horrid fit. Still, it actually fits pretty decent considering, the front has to come up just a bit to clear the trans, and I did make a slot for the trans to poke thru even though it doesn't really need it after all. With a proper fitting body it would clear and look good

[Kyoshojoe]

looks pretty wicked, names that come to mind are Doppleganger or Twinstealth. An idea for belt tensioner could be like the Kyosho slingshot or a bearing mounted on an off-centered shaft cam style like a timing belt tensioner in a 1/1 car. A thouhgt comes to mind to that a oneway in the front diff or on the drivepulley might allow offset tire size. just a few ideas. I love the fact that your commiting ultimate sin by using kyosho parts on an associated car. I look forward to seenig its progress.