RE RE STEALTH TRANS
- GodSpeed
- Approved Member
- Posts: 278
- Joined: Thu Jan 23, 2014 12:14 pm
- Location: Burlington, ON Canada
- Been thanked: 2 times
Re: RE RE STEALTH TRANS
I ordered a 6560 kit before they were completely unavailable. Arriving via USPS air soon. Now, which gear cover is better?
Associated #6566 - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDYZ&P=7
Or for double the price, RPM #70081 - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMVV&P=7
Associated #6566 - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEDYZ&P=7
Or for double the price, RPM #70081 - http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMVV&P=7
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: RE RE STEALTH TRANS
The RPM will fit the VTS, plus it looks cooler in white! I like mine, it clears my VTS with no issues!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- GodSpeed
- Approved Member
- Posts: 278
- Joined: Thu Jan 23, 2014 12:14 pm
- Location: Burlington, ON Canada
- Been thanked: 2 times
Re: RE RE STEALTH TRANS
I do prefer the white, but I also like the look of the plastic material used on the TA black one. Almost looks like it's coated in Line-X bedliner or plastidip.slotcarrod wrote:The RPM will fit the VTS, plus it looks cooler in white! I like mine, it clears my VTS with no issues!
- GodSpeed
- Approved Member
- Posts: 278
- Joined: Thu Jan 23, 2014 12:14 pm
- Location: Burlington, ON Canada
- Been thanked: 2 times
Re: RE RE STEALTH TRANS
Well, I picked up the RPM case and it did indeed come with mounting screws, but, the Associated #6560 Stealth kit I ordered from Stormer just arrived and it came with a #6566 gear cover and a motor plate as well. WTH?
Was it supposed to? Neither of those items are in the exploded parts view from Associated.
http://www.teamassociated.com/parts/details/6560/
Was it supposed to? Neither of those items are in the exploded parts view from Associated.
http://www.teamassociated.com/parts/details/6560/
- GodSpeed
- Approved Member
- Posts: 278
- Joined: Thu Jan 23, 2014 12:14 pm
- Location: Burlington, ON Canada
- Been thanked: 2 times
Re: RE RE STEALTH TRANS
Where's that picture comparing the USA vs. Re-Re (China) Stealth cases? I just searched through dozens of pages in various posts and had no luck with the search either.
I'm hoping that I didn't get a piecemeal kit and ended up with a Chinese case.
Edit -- I think this is what has happened. I can't find the picture comparison, but from the descriptions I've read, I have the Re-Re case.
Should I call them to have it, hopefully, sorted out, or is this case okay?
I'm hoping that I didn't get a piecemeal kit and ended up with a Chinese case.
Edit -- I think this is what has happened. I can't find the picture comparison, but from the descriptions I've read, I have the Re-Re case.
Should I call them to have it, hopefully, sorted out, or is this case okay?
-
- Approved Member
- Posts: 3756
- Joined: Tue Feb 07, 2006 2:12 pm
- Has thanked: 17 times
- Been thanked: 36 times
Re: RE RE STEALTH TRANS
that is not the same case i have in my 6560 bags. mine looks closer to the original and its a fugly grey hue.GodSpeed wrote:Where's that picture comparing the USA vs. Re-Re (China) Stealth cases? I just searched through dozens of pages in various posts and had no luck with the search either.
I'm hoping that I didn't get a piecemeal kit and ended up with a Chinese case.
Edit -- I think this is what has happened. I can't find the picture comparison, but from the descriptions I've read, I have the Re-Re case.
Should I call them to have it, hopefully, sorted out, or is this case okay?
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: RE RE STEALTH TRANS
the case is not the problem, so it doesn't matter which one it is. the problem is the topshaft that came in the worlds kits. it's made wrong. i don't know if that same problem will occur in the trans only kit. build it and find out, you'll know right away.
it may be possible that they packaged the wrong case in your kit. the idler gears are different between the two, so which one of those do you have? gear on shaft or the bearing gear on a separate idler shaft?
it may be possible that they packaged the wrong case in your kit. the idler gears are different between the two, so which one of those do you have? gear on shaft or the bearing gear on a separate idler shaft?
- GoMachV
- Super Member
- Posts: 11360
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 832 times
- Been thanked: 2470 times
Re: RE RE STEALTH TRANS
Didn't we determine that the case tolerances were too tight even with proper top shaft? I thought we had a gear clearance issue still
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GodSpeed
- Approved Member
- Posts: 278
- Joined: Thu Jan 23, 2014 12:14 pm
- Location: Burlington, ON Canada
- Been thanked: 2 times
Re: RE RE STEALTH TRANS
Glad you're on this, scr8p and gomachv. Appreciate your attention.
Here's what I got. I'm hesitant to completely open the bags in case I need to send this stuff back.
The bag with most of the stuff (the bearings and gears, etc.) look like it might be unmolested Associated packaging. Stormer may have just added the case and motor plate/gear cover after addressing other customers' issues with Worlds kits they sold them??
Let me know what you think.
Here's what I got. I'm hesitant to completely open the bags in case I need to send this stuff back.
The bag with most of the stuff (the bearings and gears, etc.) look like it might be unmolested Associated packaging. Stormer may have just added the case and motor plate/gear cover after addressing other customers' issues with Worlds kits they sold them??
Let me know what you think.
- GoMachV
- Super Member
- Posts: 11360
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 832 times
- Been thanked: 2470 times
Re: RE RE STEALTH TRANS
Yup you have the newer idler made for that case
It will probably be just fine but I'm not a big fan of this break in crap- the old stealths were cherry right out of the box!
That's not the official stealth kit. No header card right? I think they took it out of a kit. Probably breaking kits cause the profit is better
It will probably be just fine but I'm not a big fan of this break in crap- the old stealths were cherry right out of the box!
That's not the official stealth kit. No header card right? I think they took it out of a kit. Probably breaking kits cause the profit is better
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: RE RE STEALTH TRANS
i had big problems with mine. you could barely turn it. installed new top shaft in the same case and it was fine. ok...... maybe not fine, but it's nothing that half a battery pack wouldn't take care of. not necessarily how i would've liked it, but at least it spins.gomachv wrote:Didn't we determine that the case tolerances were too tight even with proper top shaft? I thought we had a gear clearance issue still
it's not just the gear mesh deal either, the top shaft has the problem with the flat spots being milled down too far as well. so it needs to be swapped out for a new one regardless. when ae sent my replacement top shaft they sent a new case along with it. i guess i could've tried it too see if the new one would've been any better, but my car will never be used anyway. so, it's good enough the way it is.
worst case scenario you may have to get a new top shaft. or just send it back and make sure you get one of the old style stealth kits.
and as jeff said, it looks like your was pulled from a worlds kit.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 1082 Views
-
Last post by longboardnj
-
- 12 Replies
- 1607 Views
-
Last post by badhoopty
-
- 20 Replies
- 2711 Views
-
Last post by dirk_411
-
- 11 Replies
- 1283 Views
-
Last post by tiger1
-
- 8 Replies
- 841 Views
-
Last post by klavy69
-
- 10 Replies
- 2077 Views
-
Last post by lmw94002
-
- 24 Replies
- 4031 Views
-
Last post by mrlexan
-
- 7 Replies
- 530 Views
-
Last post by Bormac
Who is online
Users browsing this forum: Ahrefs [Bot] and 4 guests