![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/C65EF08D-0433-41D8-A6EE-21ADDA66D844_zpsv2hbtj1s.jpg)
My plan is to switch out the graphite chassis on my MIP SP-2 equipped chassis.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/DCDB47DD-C1FF-4C63-B6DC-1F6179136C71_zpshf0b6hd5.jpg)
I always wanted a nicer condition chassis than the used one I used on this buggy. I ended up getting a new graphite chassis but was reluctant to cut new holes in such a beautiful pristine chassis.
This fusion speed tub is in very nice condition but not perfect. Therefore I don't mind drilling some new holes in the chassis. I made templates from the old chassis.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/A05F8869-0721-4663-B8D0-0844A44078B2_zpsxrzghixc.jpg)
http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/6199418D-2749-4E34-8024-17368E4A741E_zpsqioxlldp.jpg[/img]
Drilled the new steering linkage holes
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/92D225A8-2D8F-46FB-8A89-71779DA1F808_zps6mfwihao.jpg)
And countersunk the screw holes
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/5902BE78-ADE9-4178-9D2D-E35FE367EB67_zpsaub2nzfz.jpg)
It all fits. Unlike the graphite chassis I will need to use the belt tensioner on this buggy
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/5ADEF640-53E9-4BD2-8340-6278C38B0D28_zpsvvzqjdzh.jpg)
I plan to use this alternately painted Jay Halsey body painted by squarehead designs on a project.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/A663033A-8F2D-4228-86F6-3104910959B6_zpsxaukg3rr.jpg)
Can someone point me in the direction of some detailed pics of the white car. I would like to see the various sticker placements.