The Official "What is it?" Thread

[Incredible_Serious]

1st Does anyone remember who made the chassis brace and second do you remember what the yellow object was for

Never have seen this brace before but usually most of these anodized aluminium parts were made by GPM. If it feels lightweight and soft aluminium it' s this company

You dug back into the archives to answer that one!!!! March 2017!!!!! Now if only we could work out what the question was....

[Incredible_Serious]

Identified what my parts were, not at all relevant to this group.....

Carry on.

Alex

[V12]

1st Does anyone remember who made the chassis brace and second do you remember what the yellow object was for

Never have seen this brace before but usually most of these anodized aluminium parts were made by GPM. If it feels lightweight and soft aluminium it' s this company

You dug back into the archives to answer that one!!!! March 2017!!!!! Now if only we could work out what the question was....

That photo didn't make it to the quote

[Phin]

Mostly interested in finding out if the Blackfoot/Lunchbox bumper is a manufactured part or homemade but if you recognize the other bits please let me know what they belong to.

Also, it might not be part of this board's expertise but does anyone recognize this clutch & flywheel assembly?

[pottok]

Hi,
I would like to know in which car feat these Hyperdrive springs. Diameter is approximately 6mm (.24'') so larger than standard 10L front springs.
Thanks

[matt1ptkn]

Mostly interested in finding out if the Blackfoot/Lunchbox bumper is a manufactured part or homemade but if you recognize the other bits please let me know what they belong to.

DSC_2378.jpg

The plastic box part on the right is is a stock clodbuster battery holder. It clips into the side of the plastic chassis to hold a 6 cell stick pack in place.

[V12]

Hi,
I would like to know in which car feat these Hyperdrive springs. Diameter is approximately 6mm (.24'') so larger than standard 10L front springs.
Thanks

These springs were used with stepped washer and longer kingpins.

[pottok]

These springs were used with stepped washer and longer kingpins.

Many thanks for your help

[Lonestar]

Any idea on these bodies, which were fitted to a trx1?

I think the blue/green one is S&K... the second one, not sure, has a cougar-ish look to it but I can't quite nail it

Thanks!

Paul

[Phin]

Both are Dahm's bodys...skinny one is a Torpedo, wide is a Terror. The Terror would fit the TRX-1.

[Lonestar]

Both are Dahm's bodys...skinny one is a Torpedo, wide is a Terror. The Terror would fit the TRX-1.

wow. Thanks!

[V12]

Found that 1/12 scale pod in one of my boxes but can´t remember which car does it go for. Thought of Kyosho but don´t find matching photo.
Someone have an idea?

[Phin]

Checking onceuponatime.sblo.jp it looks like it's off a Mugen K2X Cosmic.

[V12]

Thanks!
Of course it's Mugen.
When you start forgetting about your own cars ... actually own a K2-X but had no look at since a couple of years

[TRX-1-3]

Any idea on these bodies, which were fitted to a trx1?

I think the blue/green one is S&K... the second one, not sure, has a cougar-ish look to it but I can't quite nail it

Thanks!

Paul
CarrosTRX1 (2).jpgCarrosTRX1 (1).jpg

Skinny one fits TRX-1 and / or JRX Pro SE. If you look closely, you might see alternative trimming guides / lines in the body (molded).