Goldie going for a spin at the track...
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Goldie going for a spin at the track...
With several shelf quality type projects going on and not much spare time, I've got the itch to build a few racers. The only car I have that is fully functional is the mint CE I picked up from flip last year. I hate to run it, but it does have a full lexan underpan not to mention I'll try and take it easy. . Going to tool around with a couple of guys next weekend that have newly built B4's who haven't raced in awhile either. I'll see what the 17.5 does first, with a 13.5 for backup. Body doesn't fit the 'scheme' too great either, but it was cut and fits good. Put together an old Buds wing too.
This will be my first attempt at wheeling a car around a track seriously in a LONG time. Looking to get a feel for it again, but more so for a good bit of fun. Here are a few pics and a link to the track.
[youtube]9MsogPWxmwQ&list=FL7GZhE9ygTs7wU7Qd9GF7Dg&index=1&feature=plpp_video[/youtube]
This will be my first attempt at wheeling a car around a track seriously in a LONG time. Looking to get a feel for it again, but more so for a good bit of fun. Here are a few pics and a link to the track.
[youtube]9MsogPWxmwQ&list=FL7GZhE9ygTs7wU7Qd9GF7Dg&index=1&feature=plpp_video[/youtube]
Re: Goldie going for a spin at the track...
Sweet !!!! I got such the itch now. I got the cadilac looking for a newer chassi & Stealth Trany. I want to go brushless so bad.
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Goldie going for a spin at the track...
Yeah, they do the sliders and others I think. Not 100%, but I think this is the current track layout.
[youtube]pXFjBl2pcbo[/youtube]
[youtube]pXFjBl2pcbo[/youtube]
Re: Goldie going for a spin at the track...
Thats where I use to race I only live about 10 minutes away. Not a bad little track.
Those are my toys and no I will not share!
- TamiyaTony
- Approved Member
- Posts: 42
- Joined: Tue Mar 09, 2010 1:33 am
- Location: New Lenox, IL
Re: Goldie going for a spin at the track...
Nice RC10. I like the lexan under pan. I've never seen that before. Is that your design, or is that readily available?
My son... ask for thyself another kingdom... for that which I leave is too small for thee.
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Goldie going for a spin at the track...
Come on out next Sat. rhino! The lexan undertray is from a member on here(CRS moment) in the BST section. I don't see the thread.
Re: Goldie going for a spin at the track...
Do they still open at 3 and start racing at 6?askbob wrote:Come on out next Sat. rhino! The lexan undertray is from a member on here(CRS moment) in the BST section. I don't see the thread.
Those are my toys and no I will not share!
Re: Goldie going for a spin at the track...
Wow, talk about tame layouts. Could race a touring car on that track lol. Nice car by the way, cool to see you're running it and I love the paint job!
Re: Goldie going for a spin at the track...
Do you know if they have an open class for sc now? Because the last time I was out there they only had a slash class I would rather bring my SC10. I guess I could just bring my B4.
Those are my toys and no I will not share!
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Goldie going for a spin at the track...
I'm not sure on the open sc class rhino, this will be my first time there. They do open at 3 for practice until racing at 6. The guy I'm going with, has been several times the past year. I say bring the B4! Weaz, the layout is why I'm gonna run this car.
- LowClassCC
- Approved Member
- Posts: 888
- Joined: Wed Mar 25, 2009 12:08 am
- Location: Mauckport, Indiana
- Has thanked: 89 times
- Been thanked: 104 times
Re: Goldie going for a spin at the track...
if you are talking about PnT i am pretty sure that are running sc10's up there also. there are some posts about them on the PnT forum. http://www.pnthobby.com/forum/category-view.asp
- THEYTOOKMYTHUMB
- Super Member
- Posts: 6816
- Joined: Wed Oct 22, 2008 5:15 pm
- Location: Evansville, IN
- Has thanked: 2127 times
- Been thanked: 1352 times
Re: Goldie going for a spin at the track...
I had contacted them once, but haven't been up there. I may have to check it out some time. Only about 90 minutes from me. I can't access the youtube vid here at work, but I hope the layout is tame if you're running that car. I can't wait to get home and check it out.
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring."
Ken
Ken
- askbob
- Approved Member
- Posts: 1735
- Joined: Sun Apr 03, 2011 11:24 am
- Location: KY
- Been thanked: 3 times
Re: Goldie going for a spin at the track...
I hope it's tame for my old arse! You oughta come up thumbs, hell we can just have a 10talk party.
- THEYTOOKMYTHUMB
- Super Member
- Posts: 6816
- Joined: Wed Oct 22, 2008 5:15 pm
- Location: Evansville, IN
- Has thanked: 2127 times
- Been thanked: 1352 times
Re: Goldie going for a spin at the track...
Looked like you were wheelin' that thing pretty good Bob! Watched it on my ipod. I like the layout you were running on. I'd only have to remember to turn right twice!
"The world looks so much better through beer goggles: Enjoy today, you never know what tomorrow may bring."
Ken
Ken
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 1247 Views
-
Last post by GoMachV
-
- 136 Replies
- 9246 Views
-
Last post by abailey21
-
- 6 Replies
- 742 Views
-
Last post by a01butal
-
- 16 Replies
- 1550 Views
-
Last post by farmer
-
- 86 Replies
- 8824 Views
-
Last post by Charlie don't surf
-
- 2 Replies
- 1322 Views
-
Last post by lmwong
-
- 5 Replies
- 1095 Views
-
Last post by LoboNYC
-
- 18 Replies
- 1625 Views
-
Last post by knucklebuster
Who is online
Users browsing this forum: Amazon [Bot] and 3 guests