Trannies on the corner...

[NomadRacer]

Tranny builds for the future, part 1.

[mk-Zero]

That Stealth is just begging for some Aluminum outdrives!

[NomadRacer]

That Stealth is just begging for some Aluminum outdrives!

[romulus22]

I read the title and thought you took a vacation to Cincinnati OH

[NomadRacer]

I read the title and thought you took a vacation to Cincinnati OH

I was inspired by the "Looking for hot singles in your area" thread!

[orangemazda]

I read the title and thought you took a vacation to Cincinnati OH

I was inspired by the "Looking for hot singles in your area" thread!

Nice!

[orangemazda]

Tranny builds for the future, part 1.

Where did you get the sweet aluminum spacers and cap?

[NomadRacer]

Where did you get the sweet aluminum spacers and cap?

I machined the spacers and cap myself

[mk-Zero]

Where did you get the sweet aluminum spacers and cap?

I machined the spacers and cap myself

Nice work!

[Lonestar]

Where did you get the sweet aluminum spacers and cap?

I machined the spacers and cap myself

Nice work!

Nice work indeed

Toyranausor had some (spacers, not cap, that cap is lovely btw!) for sale a while ago...

(based on my recommendation, btw...)

... he might still have a few!

[NomadRacer]

Thanks guys, I enjoy making things

[NomadRacer]

Some parts for the Stealth came in today. Avid bearings, 9601 top shaft and other misc. parts.




Some kind of goof up with the diff. kit, rings are to big. I already had some of the correct ones so everything is cool.

[GoMachV]

Yeah that’s the diff rebuild for gt/t2/etc. The original 2.25 stealth rebuild is easiest to source as a TC3 rebuild kit part number 3926

[NomadRacer]

Thanks for the scoop, Jeff. Glad I didn't buy to many of them!

[NomadRacer]

Here's a prototype 6 gear bearing dust cap from this morning... It needs some changes to dimensions but is a good first try IMO. The diamond knurling was a bit of a chore for my old Taig lathe, belt started slipping so had to back off before I got it as deep as I wanted. I have about a 10" length of 1/2" dia. aluminum round bar so plenty to goof around with!