RC10Talk - The Net's Largest Vintage R/C Community

I remember the invader cars with the Ind. Front suspension, does anyone recall the super digger with the rear suspension (ind)? I seen pics but cant find anymore. I have come across a bag of Bolink parts # BL-5119 (rear swing arms for super digger)...

Noticed not to many bolinks on here lol on the rc10talk. Thought I would share one I recently built from a new kit. Tried to use period correct for most.

Can anybody tell me the full length of the RJ Speed Legend Diff axle? Picture for reference (ie. the 1/4 threaded axle...not the drag axle). Thanks in advance for any help! RJS5730_A0_P3V4LK3X.jpg

Was digging out more stuff and came across my sons old legend car. I remember these were fun to race.

received_3132782546867190.jpeg

received_738238668025847.jpeg

received_172070865628970.jpeg

Bolink: Doing quick-change things before quick-change was cool! :D

Super happy to have found this Eliminator Enduro in great condition. I added the following period parts:

- Novak T-4, NER-2x, NES-1A & Stutter Stopper
- Trinity Slot Machine
- PTI...

Picked up a Bolink Round Tracker a little while back just to add to the pan car collection. I picked the car up mainly because many of the nylon pieces are engraved with minicars which I believe was a Swedish brand bought out by Bolink, but the fact...

Here's a question for you.
I have a Bolink LTO XL and there's no manual in it. I do not know if the manual got lost over the years or if Bolink even offered a manual for it.
Anyone know if there were a manual for this kit?

I striped the Differential shaft on my bolink pan car. I bought a RJ speed one that looked like it would work but its to short, I cant tell if the little dots in the picture are allen screws so the round part could be moved. Is there any place that...

is there a set of rubber tires that will fit a vintage bolink pan car? instead of the foam ones?

Anybody know what model Bolink this is? I cant find any pictures online with just the one shock, most have two that I've found.

I've never had a Pan Car but I'm sort of curious and after a little advice from a few of you guys in my Pan curious thread I settled on some (forgotten to me ) middle ground in the form of the Bolink Digger , the Digger was basically a 1/10 Pan car...

My Invader MT was looking pretty sad. It wasn't that it was heavily used, but the previous owner converted it to a pan car by trimming the axle and pod down and undoing all the mt stuff. I had a Invader Dirt Oval that was a new built that gave its...

Finally got around to start building this fresh out of the box Bolink invader , quite a unusual chassis that I’m used to but it feels solid and great suspension travel .
Lots left to do but loving it so far

Camino sport 2000
Not touched it , in its 30+ yrs raw form
The body will need some tlc as the OG owner must have pre cut the shell with an old dog bone !

There is a new Facebook page created and it sounds like Bolink is coming back. I believe some of the body molds went to RJ Speed and RC Car Kings, and the Legends platforms went to RJ, but it sounds like the trademark has a new owner. This will be...

We, me and the diamond one have a new appreciation for the Bolink Invader line, including the MT. Nothing to show cause we dont have one. Maybe someone will have one to show.

Does anyone know what car this is?
Thanks

20200714_113719.jpg

Have the Eliminator fully assembled and now thinking ‘tronics. More from the motor / battery aspect as I have a Spektrum DX5C so I’m just going to get a receiver. I was wondering if anyone has gone brushless/LiPo on one of these models. My concern...

Just received a Bolink Challenger, or at least I think it’s a Challenger. When I go online and run a search, I don’t see this particular chassis. It has the beige bottom pan and an orange top pan. It’s a 1/12 scale and still has the original msc....

Aside from my Bolink Challenger that arrived a few days ago, my vintage Bolink Eliminator showed up. If I can scrounge the parts, that’ll be my next restoration project. It needs a good washing and I’ll have to get bearings to replace the bushings...

This is gonna be my first project of many I o ow this is a old bolink pan that’s about all I know any information would be great :)))) also I’d love to see other people’s pan chassis stock or custom I love them all

I must first by saying thank you to all of the particapents of this form I’ve been reading through some of the post over the last few weeks and was blow away with the amount of knowledge and commradery this form has to offer. With that My name is...

This is the sort of thing I loved bitd. A total 180 from my B6 with it's never ending capacity for micro adjustments. A simple Bolink Legends chassis with Twinn-K wheels, Tekin esc and receiver and a modified hot rod Pinto body. Not sure if it would...

Hello. I'm new here. I hate to start off asking for help, but: you guys were recommended to me. I am restoring a Bolink Renegade from the early 80's. This was my first R/C car. Given to me by my father. This Christmas is the 30th anniversary of that...

Just acquired this early Bolink! Very happy to have it and it's in very good shape! Rolling chassis for nitro or electric. I messaged Bob Rule and he says it was the first of their kits. More pics to follow

I got this is a parts lot and I have no idea which bolink models these are. Needless to say pan cars are not my strong point

Does anyone here have a 1/12 Jerobee Cheetah? I have never seen one for sale and only came across a picture of one from a wanted ad. I understand Bolink also did 1/12 cheetah body as well. I am looking for pictures and information.

Does anybody have a pictures of the original Bolink Digger? I'm intersted in the history of this early off-roader (not the later versions based on the Legends cars). From what little I've found, they seem very simple. How did they stack up against...

Last year, in a big lot of about 18 vehicles that I traded for, one was a VERY barebones Bolink Super T roller with a body. My son loved it at first sight - and I must say, I thought it was pretty cool too)...he's been begging every time he sees it...

this is my new built bolink digger. also have the orginal box and all the paper work. i think i will be painting this buggy either green or yellow with some white highlights like the box art. DSCN3332.jpg DSCN3333.jpg DSCN3334.jpg

hi everyone i have a question... what is this car worth.. i had it offered to me for what seems like a alright price but have no experience in them.. have seen the kit and everything is still in sealed bags and complete...

KGrHqJHJCE9SlMoRBPQVWw3g60_12.JPG Started new thread to post the pics of the nitro Invader that Came with the Box cover body that I picked up years ago. Sorry I robbed all of the radio gear and fuel tank and cleaned all of the Georgia clay off of...

been wanting one ever since i saw gomachv's round tracker on here.

This is from a friend, its a Bolink 1/10th scale, but what is it? help please to id this car.

Need some TLC with fries to go with it. :lol::lol:

Hey guys had a couple hours to myself today made the modifications needed to turn my Bolink Digger into a respectable rc car (well as much as one could respect a Bolink Digger).

I took a page from GomachV's book and did some customs work to mount a...

Hello everyone,
I purchased a Bolink eliminator 12 cf-c (carpet version) kit from Steve Rule a few years back. Steve Rule is the son of the Bob Rule who started and owned Bolink. The kit is almost complete. It only need a T-plate, and the graphite...

Just got this early 1/12 car what is of the Jerobee chassis type. I think the first versions had a white or grey chassis where the black chassis might be newer. The former owner told me he got this car as either Jomac, Bolink or MRP.
Front and rear...

looks like it was never run. can't find much / any info about this model :?:

hello All,

I just added a new car to my collection. From what I can see, it's pretty rare and has been the topic of discussion on this board before. The car is in excellent condition for it's age and I can't wait to start the rebuild. Here are some...

Hey all. So I have had this laying around for awhile and decide to make a dragster out of it. gomachv Hooked me up with a parts lot as my Drive shaft was toast on my chassis and he sent me some chassis parts as well. :wink:

I also have some new...

Years ago this was my 12th scale pan car that I used during my racing days. I bought this one from a hobby shop used but in excellent condition. I also bought a RC12L graphite pan car as well but was missing the shock to the rear pod. I loved how...

Hey ,had to show a pic or 2 of my pride and joy,I know its not an rc10 but I thought you guys would appreciate it. It (the body anyway for sure) is the actual car Bolink used in many catalogs & magazines ,airbrushed by motion graphics whom I had...

The invoice :mrgreen:

The blueprint

I will scan the instructions later 8)

Hey fellers. I saw this guy for sale, and wanted to ask any BoLink fans: Is this a stock chassis? I don't remember that BoLink made aluminum chassis pan cars, but have limited knowledge on vintage BoLink stuff...

Just picked it up and after a very quick cleaning...

Before:

After:

I haven't seen one for years. I have to think they didn't sell too many. Looks like fun though. Not sure if it will be run or not.

I was working on my Cheetah Telesis car but got stopped due a delay for parts so I decided to jump into this car. Got it from Rick a while back and it was in great shape with the need for some parts to get it further along. I found a pair of Bolink...