Been thinking about this for a bit....Nitro 12L3
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: Been thinking about this for a bit....Nitro 12L3
I'm opposed to that for the same reason as not hanging the servo on the pod to save the troubles of cables-it's a lot of unsuspended weight.
I have considered a couple of small ~1oz tanks tho, I could run them them saddle pack style and relocate the servo from where it is now. It's easy enough to "Y" the tanks together. Two ounces is roughly 60cc, not far from a 75cc tank that a much larger .12 uses
I have considered a couple of small ~1oz tanks tho, I could run them them saddle pack style and relocate the servo from where it is now. It's easy enough to "Y" the tanks together. Two ounces is roughly 60cc, not far from a 75cc tank that a much larger .12 uses
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- scr8p
- Administrator
- Posts: 16528
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 958 times
Re: Been thinking about this for a bit....Nitro 12L3
i'd flip the steering servo to the front and put the throttle servo in it's place. then use saddle tanks.
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: Been thinking about this for a bit....Nitro 12L3
Good call, it would free up a lot of space
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: Been thinking about this for a bit....Nitro 12L3
I think I would try to leave the steering servo and try to stack the throttle servo on top of the steering servo. Might need some new custom servo mounts for the throttle servo. That's the config that popped into my head when I looked at the car.
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: Been thinking about this for a bit....Nitro 12L3
You would have trouble fitting a body this way.trek wrote:I think I would try to leave the steering servo and try to stack the throttle servo on top of the steering servo. Might need some new custom servo mounts for the throttle servo. That's the config that popped into my head when I looked at the car.
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: Been thinking about this for a bit....Nitro 12L3
I relocated the steering at first but the throttle servo still wasn't happy, I lost the servo mounts, and the geometry all were effected. I went back to the stock setup and added the throttle servo behind it and lost the stock antenna mount. Used gt servo mounts and a gt receiver mount, plenty of room for saddle tanks now! And....I picked an old can am body that was mismade- good one to practice on. The servo just barely clears. On a GTP body it wouldn't be an issue at all. The height vs a cox nissan is still pretty close and they ran micro servos.
![Image](http://i1115.photobucket.com/albums/k545/gomachv/C4C0AB1C-0CCC-4244-B43C-C07521DAC516_zps74o7cbaj.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/D5B5B04D-4D97-4630-B076-EE6C40DABE11_zpsi5hr8160.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/EE7A155F-BF00-405F-8759-856FC990EEBB_zpsyyvxqxck.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/D22B11BF-F3CC-4FE2-BDDE-F2A9BF07755D_zpsql1awazt.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/C4C0AB1C-0CCC-4244-B43C-C07521DAC516_zps74o7cbaj.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/D5B5B04D-4D97-4630-B076-EE6C40DABE11_zpsi5hr8160.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/EE7A155F-BF00-405F-8759-856FC990EEBB_zpsyyvxqxck.jpg)
![Image](http://i1115.photobucket.com/albums/k545/gomachv/D22B11BF-F3CC-4FE2-BDDE-F2A9BF07755D_zpsql1awazt.jpg)
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- LoboNYC
- Approved Member
- Posts: 778
- Joined: Tue Apr 09, 2013 12:26 pm
- Location: Staten Island, NYC
- Has thanked: 814 times
- Been thanked: 344 times
Re: Been thinking about this for a bit....Nitro 12L3
I thing of beauty!
I enjoyed how this car came together!!!
I enjoyed how this car came together!!!
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: Been thinking about this for a bit....Nitro 12L3
It will look even better in carbon fiber when the bugs are worked out ![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
-
- Approved Member
- Posts: 942
- Joined: Wed Aug 07, 2013 5:25 am
- Location: Oregon Coast
- Has thanked: 100 times
- Been thanked: 206 times
Re: Been thinking about this for a bit....Nitro 12L3
Looks wonderful! Fall back option, what about mounting the throttle servo behind the pod?
(late I know... but I am a slacker lately..)
Chris
(late I know... but I am a slacker lately..)
Chris
Losi - Jrx2, Pro, Jr2, Pro SE, JrxT, JrT, LXT, NXT, XXKE, XXTG+
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
Mini - T, LST, LST2, Crawler
Micro - Trekker, SCT, T
Crawlers - Trx4 Defender, Bootleg Bruiser Shelf Queen
-Bashers under contruction- Jrx2
- GoMachV
- Super Member
- Posts: 11337
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 825 times
- Been thanked: 2434 times
Re: Been thinking about this for a bit....Nitro 12L3
Fixed it for yahugger19 wrote:dont forget the gas tankS
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- SFC K
- Approved Member
- Posts: 1336
- Joined: Tue Nov 30, 2010 9:24 pm
- Location: Oakdale, MN
- Has thanked: 47 times
- Been thanked: 9 times
Re: Been thinking about this for a bit....Nitro 12L3
Cool looking car Jeff!
the new location for the throttle/break servo a perfect location and freed up space for the dual tanks.
![Cool 8)](./images/smilies/icon_cool.gif)
Jeff
- EvolutionRevolution
- Approved Member
- Posts: 1495
- Joined: Tue Feb 01, 2011 3:24 pm
- Location: Netherlands
- Has thanked: 20 times
- Been thanked: 36 times
Re: Been thinking about this for a bit....Nitro 12L3
Nah, link cars exist since much longer. Trinity's Evolution 10 predates the RC10L3 and had links.gomachv wrote:I've come to a fork in the road.
Tweak is the single most important thing on a pan car
By adding the fuel tank to one side, tweak will never be correct
I can't center the tank with a T plate
I really need to go to a link style/lipo style setup, and I can, but now we are in two generation newer tech.
For the steering servo, you could go for a Tamiya F103-style set-up, with the servo vertical with an ear cut off. Also a period solution. Or drop a micro servo between the front arms.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 57 Replies
- 4578 Views
-
Last post by NomadRacer
-
- 6 Replies
- 1296 Views
-
Last post by PlastiZapCA+
-
- 5 Replies
- 1200 Views
-
Last post by rraeford
-
- 25 Replies
- 3736 Views
-
Last post by Niki
-
- 10 Replies
- 3380 Views
-
Last post by AD-RS1600i
-
- 10 Replies
- 915 Views
-
Last post by tommykart
-
- 10 Replies
- 1117 Views
-
Last post by EvolutionRevolution
-
- 20 Replies
- 2439 Views
-
Last post by RCveteran
Who is online
Users browsing this forum: No registered users and 2 guests