This is a c stamp, with a copper head motor, modern ESC, Spektrum RX running 2S, and of course the new Jconcepts Protector body and Mono wheels. Its # 8/9 out of my goldpan restorations.
Rctommy wrote: ↑Sun Jun 20, 2021 1:32 am
This is a c stamp, with a copper head motor, modern ESC, Spektrum RX running 2S, and of course the new Jconcepts Protector body and Mono wheels. Its # 8/9 out of my goldpan restorations.
That looks really nice. When you say 8/9 do you mean you have one more left?
I have a few T3 runners so I have collected quite a few parts of the years. My daughter is getting to the age where I thought I'd put a truck together for her too. After digging thru my stuff I discovered I have enough parts to build a truck with...
Last post
Cool build you've got. I've become a big fan of the T3/B2/3 series over the past year. I am nearly done with my T3, and currently working on my B3.
That's nice! I believe you picked up a B3 from me in 2021. My all new build I did similar to my T3...
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...
I know I have seen several others go this route. Gather up all the spares and second string parts you have and create a runner. My question is, just how effective is that? I can see myself ordering a ton of new parts to build a beater that never was...
Last post
I have built up beaters using scrap parts . Bent tubs , stripped out threads on the nylon parts , and all that other scrap the should go in the trash. When you have to buy a part for a beater they become resto projects or money pits . Beaters are...
I was going to start disassemble and clean my 10T when I had a thought. Do I have enough spare parts to put another tub together? The answer of course was yes. It may not be pretty or complete(yet) :D But it has some cool stuff on it.Nothing was...
Last post
Thats pretty cool that you built that with spare parts man. I need to buy some more parts lots my stock pile is looking a little low. great job
Hey guys. I've been updating some of my RC10s. Also, I moved to a new, bigger house back in early 2021. This means that I've been able to organize all of my cars and parts. I've found that I had lots of stuff squirreled away including plenty of RC10...
Last post
Also, I moved to a new, bigger house back in early 2021. This means that I've been able to organize all of my cars and parts.