I mentioned few days ago I would create this thread in one of my numerous thread where I actually speak about 3D modeling and 3D Prints in middle of vintage cars...
I currently have an Ender 5 Plus, which is stock beside the full metal...
Last post
If you're not changing resins and don't have the printer near a window you don't even need to drain the vat unless you're going several months with it not in use.
I know but It really depends the resin you use (not all are behaving the same on...
I gave away almost all my old printers, got rid of 6 of the 8. I will keep my Ender 5 plus only because of the volume. After my first print with the X1C I was sold. It just works.
That said, I have had some odd things with the machines. For one,...
Last post
the connector for the stock light is under the panel at the front left side from what I have seen online and people are connecting their LED strips to that. Then you dont have to turn it on and off manually. Not a big deal but since I have been...
This is my first attempt at 3D modelling and then 3D Printing a part , I've started with a fairly simple part , a front steering knuckle for a Yokomo Dogfighter YZ-834b , I thought i'd start with this as i need one and they are hard to find ....
Last post
great idea... And can be customised easily, with any kind of form... And printed in TPU could be quite realistic...
I recently had 2 Kyosho OT-85 center gears (idlers) printed by Shapeways.
The gears were printed MJF PA12. Vapor smoothing or any smoothing was not an option.
The gear faces are not particularly well finished. Probably nature of the beast.
I really...
Last post
Thanks Doug
It appears that to find any Google reference to the gear and find their site you must add acetal in the search terms.
Just curious if anyone here has gotten into the resin world. It has always been in the back of my mind, but TBH, the post work has always kept me away. The brittle resin thing has also been a turn off, but I think the technology of the materials is...
Last post
I 100% need to do something about the temperature situation before I go much further. Even with this mild time of year when we get into the mid 60s (~18*C) late in the day, the thermal mass of the garage slab and mass of the metal printer are all...
First off, I’m new at this. I’m not a pro. I’m learning as I go
I have two printers. A Malyan M200 and a currently unfinished Creality CR-10s. The Malyan is printing really well right now so I’m in no hurry to finish up the Creality. The CR-10s...
Last post
That works perfectly !! Now you just have to build an adorably small vacuum as well :lol:
I am looking to get some parts printed in PCblend. I think I have one .stl file sourced already. But, another part I need is a variation/prototype version of what later became the production version. There is enough of a difference between the two...
Last post
Looking at the part, it looks quite easy to model... And a nice start to onboard within 3D design with Fusion360...
Hi - has anyone used a 3D printer for parts? My understanding is the plastic is not as strong, but I guess that would depend on what material is purchased. Any have any experience with this?
Thanks!
Last post
One thing I think everyone should keep in mind when 3D printing parts is you shouldn't try and copy the original exactly, because the design of mass produced parts are largely driven by the manufacturing process, and often compromise the...
I am in the process of reassembling this car. I have absolutely everything, except this famous part. Do you know if anyone has tried to reproduce it in 3D printing, please ?
I see some of you a practically printing full cars with your printers. I'm wondering if anyone has tried any of the carbon fiber filaments? I realize in theory, it should make parts stronger and less flexible. I printed some 1.9 in Bruiser wheels...
Last post
PLA works well for wheels as long as your in a cool climate or don't leave them in the car in the sun , the CF filaments have two advantages , firstly it stiffens the plastic and second it improves layer bonding but it's not miraculous , you should...
I am hoping there is someone out there with some TPU experience that can help me out. I have thought of a couple of items that I would like to make that would have been typically made of simple black rubber. No sheen, just black rubber. I picked up...
Last post
Maybe try fuzzy skin? In Cura you can do this and it creates a textured outer wall, may give you the finish you are looking for.
So I have an Ender3 V2 I picked up last Christmas. I have been using it for smaller functional prints and am curious about making some replacement parts for RC cars. I have been learning to design parts on Tinkercad and have found some on...
Last post
Fusion 360 is free for makers and should suit your needs as long as you aren't a commercial user.
Building a few 1/10 JRX shelf queens and looking for recommendations for sourcing 3D printed parts... Specifically original, thin shock collars and bottoms (LOSA5010) as well as bumpers. Have not sourced printed parts before and a bit overwhelmed...
Last post
There are a few places to look , Shapeways to start with , they have a catalogue of parts that they can print for you or then you move onto just buying the design file from Cults3d and getting it printed at a print shop , best place to look for...
Latest 3d print for the theater room. After working non stop for the past week I took some time to relax this morning and painted up my latest 3D print. Neytiri from Avatar.
Finally got some time tonight to finish up the John Wick 3D print and got it all painted. This is the first stl file I have ever paid for, got the file for $8 about a month ago off cgtrader. It's about 12 -13 tall over all.
Last post
I'm a Next Gen fan of the Star Trek franchise. There's a Picard bust on Thingiverse that I tried printing some time ago, but it had some sort of error in it and kept layer shifting about half way through. One of these days I'll have to find another...
Figured being Labor Day weekend I would take a day off work and finally finish up my 3D printed AT-AT diorama I have been working on for about the past month or so. I scaled the print up 200% and printed it in about 26 different pieces so it's about...
Last post
That's a great piece , ten years after Return of the Jedi :!:
Went to my first 3D printing shop in South Korea in Hongdea Station area (the art hub of Seoul). Not surprisingly a lot of art students use 3D printing for their work, and the prices are really low. Dadio designed two options for the RC10...
Last post
I also thought the print was rough compared to yours. The price was great, but the quality was something to be desired. I think they probably used the smaller machine on the part. I think it took 90 minutes to print.
SPARTANS....TONIGHT WE DINE IN HELL!!!
Latest 3D printed project I have been working on. Just finished painting him up. Made the base and the larger step out of cardboard wrapped in masking tape then covered with bondo and then did it in a diorama...
Last post
The figure himself is about 6 tall, then the overall height is around 9 . It is actually a D&D miniature I found on thingiverse that was only 1 tall which I scaled up about 600%
Printed this last month in 4 pieces. Got him all together but had not had time to do paint work on him till today. Been swamped with work stuff but finally sat aside a few hours this afternoon to get Dobby all painted up so I can put him in the...
Last post
I have a pair of Ender 3 V2's with the upgraded Micro Swiss direct drive & hot end on them.
Hi, I’ve had a quick search to see if I can find anyone who undertakes 3D printing projects, but couldn’t find anything.
Is this something that anyone does at all?
I have a Tamiya Porsche 934 that I’m restoring, just bought some tyres for it, but...
Last post
If it were me and I don't really do shelf cars then I'd be adapting the static model wheels for sure , at a cost of £60 for 3d printed wheels or £100 for the real thing then I think I'd bite the bullet eventually on real ones , thing is I only have...
I've been modeling and printing parts like crazy lately, a lot of which are SRB based. Thought you guys might like to see the progress. This first set is all the vintage style nylon bits. I'm also working on a rear mono rocker that works with the...
Last post
Hi, welcome.
Have a look on Shapeways j-sou has a shop on there where youbuy the items in the first photos.
I've finally taken the plunge into 3D printing , I've ordered a cheap printer the Creality Ender 3 Pro and for the last five days I've been playing with various free 3D modeling software programmes , so far I've tried
1 Fusion 360 (confusion 360)
2...
Last post
I'm currently printing up the first thing that I've modelled myself , a fairly simple pair of front steering knuckles for a Yokomo Dogfighter YZ-834b so wish me luck , I have made a little mistake , I should have printed them in draft quality to...
Earlier this year I took the plunge and ordered a 3D printer. Only after ordering did I see the informative thread by Tamiyadan making me question my order, however I received and built a Prusa MK3 and got to work learning how to print. I spent a...
I guess that this would be the most appropriate place to share this infomation.
I just can't leave stuff alone, so I've put my 3d printer to work making parts for the re-re worlds car I recently picked up.
Link to the files if you want them:...
Last post
I got those buggy wheels & tires from Amazon and dig them! Thank you for turning me on to them.The outside dia. of the tires are a little tall but that's ok. I found some 12mm hex adapters in my stash (stock ones from a TC4) that worked for now....
i SEE EVERYTHING else so why not them too.Even some new wheel design centers.DON
Last post
I started but never finished.
File date says July 2014
Absolutely correct on require work to get smooth finish. With Shapeways sanding, with my style printer sanding or acetone most likely. This instantly turns off people, and the Shapeways prices...
I'm quite lucky that the company I work at view use of their 3D printer as advantageous; If the unit is being used it stays serviceable for longer so they don't mind the odd homer here and there.
As a result I can knock out some small components...
Hey everyone, so I need a bit of help please. My kids electric pocket bike lost a part and parts are literally impossible to find. Thanks to R Cane we were able to secure a second bike and cobble together a fully working bike.
Unfortunately the gas...
Last post
If you just want to get something to cover the electrical socket, why not look at using a rubber foot of a char or table leg?? Your local hardware store should have these rubber feet available in quite a few different sizes..
Thought this was neat so I figured I would show it. For my school homecoming I designed this sort of coin on inventor and then printed it out with glow in the dark plastic and painted the letters black. I thought that was a creative way to ask the...
Last post
Mine would say Meet me behind the gym at 10pm :lol:
Hey guys, I saw some Lazer ZX parts that nave been designed on the 3D printing website Shapeways and was wondering if anyone's had any Optima parts done yet? I tried searching but nothing came up.
I think the most wanted parts for the first gen...
Last post
How is the plating on those?
The rims in the bag are genuine items. However the extra (wide) insert and (wide) inside rim looks to have been printed. They have a very unusual texture to them. Almost like they've been sandblasted.
With all the very cool vintage RC cars that I see in this forum, and with the trouble and expense that some people go to get them as good if not better than what they would have been originally, it occurs to me that with the advent of technology...
Last post
It doesn't have to be attached, there is a support material that is removed after the part is finished.
Users browsing this forum: No registered users and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
