![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/FD2136CD-ED4F-4870-97AA-DE736205F190_zpssa6e0ndf.jpg)
I then used a dremel to round out the top.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/271F86B0-14D1-4A15-AEFD-31988898C59B_zpsaxmlzd81.jpg)
Onto the front. I want the body to fit all the contours so I used some cardboard and an old body to make another cut template for the front.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/39E162D1-5BCD-4D1E-A5BC-445333CB62B3_zpsaeip3nny.jpg)
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/AC0829AE-5446-44B1-B10D-8EF5E33CB507_zpsktqmwtbi.jpg)
Before I make this final cut, I need to disassemble the front end to see if this is where it really needs to be cut at.
![Image](http://i247.photobucket.com/albums/gg131/shodog1/RC10%20MIP%20SP-2/CD7A68A8-F480-487C-9B8F-2EA24F9F8B83_zpsx4mtgtwk.jpg)