for those not on Facebook... FanRC injection molded parts rolling out

General discussion, builds/restorations, etc...

Moderators: scr8p, klavy69

User avatar
GoMachV
Approved Member
Posts: 10948
Joined: Mon Apr 30, 2012 2:31 am
Location: Twin Falls, ID
Has thanked: 655 times
Been thanked: 1874 times

for those not on Facebook... FanRC injection molded parts rolling out

Post by GoMachV »

Fan RC has been releasing several molded parts. They look great

Here is a link in case you get curious
https://m.facebook.com/story.php?story_fbid=pfbid075iBRjTPSjPPcPUXqSzDb6mDpB43gyTifWrQG7rP1E1mQgYDSo42UV7qBZLaSaXvl&id=100082969317056&mibextid=Nif5oz
Attachments
FB_IMG_1688657977448.jpg
FB_IMG_1688657975072.jpg
FB_IMG_1688657970621.jpg
FB_IMG_1688657967670.jpg
FB_IMG_1688657960437.jpg
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
morrisey0
Approved Member
Posts: 1043
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 48 times
Been thanked: 1002 times

Re: for those not on Facebook... injection molded parts rolling out

Post by morrisey0 »

The seller is based in China, and I could order directly through him. The L&L Models seems to be a storefront to order from for those in, or closer to I guess, the UK.

Just remember when you message him that he is 12-15 hours in the future if you are in the US. So, convenient messaging times may be hard to come by. :D
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

mikea96
Approved Member
Posts: 3146
Joined: Thu Oct 01, 2009 8:34 pm
Location: Puyallup, WA
Has thanked: 96 times
Been thanked: 450 times

Re: for those not on Facebook... injection molded parts rolling out

Post by mikea96 »

Wow those look good!

JosephS
Approved Member
Posts: 1310
Joined: Thu Mar 23, 2017 9:31 pm
Has thanked: 865 times
Been thanked: 358 times

Re: for those not on Facebook... injection molded parts rolling out

Post by JosephS »

between the recent uptick in chassis available and plastics there is a renaissance going on for the rc10.
I just wish RPM was the one cashing in but I am sure to get a few sets of plastic.

mikea96
Approved Member
Posts: 3146
Joined: Thu Oct 01, 2009 8:34 pm
Location: Puyallup, WA
Has thanked: 96 times
Been thanked: 450 times

Re: for those not on Facebook... injection molded parts rolling out

Post by mikea96 »

Lots of cool associated and yokomo parts on L&L website 8)

User avatar
GoMachV
Approved Member
Posts: 10948
Joined: Mon Apr 30, 2012 2:31 am
Location: Twin Falls, ID
Has thanked: 655 times
Been thanked: 1874 times

Re: for those not on Facebook... injection molded parts rolling out

Post by GoMachV »

Oh and 10T
Attachments
FB_IMG_1688683523018.jpg
FB_IMG_1688683520460.jpg
FB_IMG_1688683527693.jpg
FB_IMG_1688683530948.jpg
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
MarkyDents
Approved Member
Posts: 911
Joined: Sun Jan 10, 2021 4:52 pm
Location: Staten Island, N.Y.
Has thanked: 1113 times
Been thanked: 408 times

Re: for those not on Facebook... injection molded parts rolling out

Post by MarkyDents »

Not for nothing as awesome as all this is, are we going to be able to tell the difference between these and originals ? I mean at quick glance right now from the pictures I’m thinking maybe not.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out 8)

User avatar
GoMachV
Approved Member
Posts: 10948
Joined: Mon Apr 30, 2012 2:31 am
Location: Twin Falls, ID
Has thanked: 655 times
Been thanked: 1874 times

Re: for those not on Facebook... injection molded parts rolling out

Post by GoMachV »

They say that the sprue points different for easier ID
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website

User avatar
R6cowboy
Super Member
Posts: 921
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 436 times
Been thanked: 448 times

Re: for those not on Facebook... injection molded parts rolling out

Post by R6cowboy »

They're molded parts look good based from the photos. Messaged them if they have any white parts for old Traxxas stuff, specifically for my Blue Eagle LS. Suspension arms have been impossible to find.
-Jerry-

User avatar
RC10th
Approved Member
Posts: 4065
Joined: Sat Feb 16, 2013 2:51 pm
Location: Australia
Has thanked: 32 times
Been thanked: 774 times

Re: for those not on Facebook... injection molded parts rolling out

Post by RC10th »

This is weird but cool at the same time....


I wonder what the story is behind these parts, and/or what happened to the Chinese seized AE molds..
I was old school - when old school wasn't cool !

User avatar
RC10superfan
Approved Member
Posts: 46
Joined: Sun Nov 01, 2020 7:29 am
Location: WA, USA
Has thanked: 46 times
Been thanked: 7 times

Re: for those not on Facebook... injection molded parts rolling out

Post by RC10superfan »

Thank you for the update GoMachV! Love anything coming out for the RC10

Retro rc
Approved Member
Posts: 497
Joined: Sat Apr 04, 2015 10:10 am
Location: Auckland New Zealand
Has thanked: 507 times
Been thanked: 345 times

Re: for those not on Facebook... injection molded parts rolling out

Post by Retro rc »

R6cowboy wrote: Fri Jul 07, 2023 1:26 am They're molded parts look good based from the photos. Messaged them if they have any white parts for old Traxxas stuff, specifically for my Blue Eagle LS. Suspension arms have been impossible to find.
Geezus imagine that lawsuit 😂😂😂😂😂😂 especially as they’re still producing those arms just in every colour except white 🙄

User avatar
R6cowboy
Super Member
Posts: 921
Joined: Thu Oct 18, 2018 5:06 pm
Location: Mendota, IL
Has thanked: 436 times
Been thanked: 448 times

Re: for those not on Facebook... injection molded parts rolling out

Post by R6cowboy »

Retro rc wrote: Fri Jul 07, 2023 6:32 am
R6cowboy wrote: Fri Jul 07, 2023 1:26 am They're molded parts look good based from the photos. Messaged them if they have any white parts for old Traxxas stuff, specifically for my Blue Eagle LS. Suspension arms have been impossible to find.
Geezus imagine that lawsuit 😂😂😂😂😂😂 especially as they’re still producing those arms just in every colour except white 🙄
Remember, it's all in the wording :lol: Where can you find those arms? Nothing ever comes up under part # 1931.
-Jerry-

User avatar
morrisey0
Approved Member
Posts: 1043
Joined: Wed Jan 13, 2021 7:45 pm
Location: Richmond, VA
Has thanked: 48 times
Been thanked: 1002 times

Re: for those not on Facebook... injection molded parts rolling out

Post by morrisey0 »

Retro rc wrote: Fri Jul 07, 2023 6:32 am
R6cowboy wrote: Fri Jul 07, 2023 1:26 am specifically for my Blue Eagle LS. Suspension arms have been impossible to find.
Geezus imagine that lawsuit 😂😂😂😂😂😂 especially as they’re still producing those arms just in every colour except white 🙄
Marketed as "Freedom Bird Azul" suspension parts and they will be just fine. :mrgreen:
I build RCs like people would have done back in the '90s ..................................... if they had 3D printers.

76jimmy
Approved Member
Posts: 32
Joined: Thu Jan 20, 2022 12:49 pm
Has thanked: 17 times
Been thanked: 16 times

Re: for those not on Facebook... injection molded parts rolling out

Post by 76jimmy »

Not being on mainstream social media does make it hard to find stuff like this anymore. Thanks for the info.

  • Similar Topics
    Replies
    Views
    Last post
  • RPM Ultra Molded T and B parts
    by JosephS » » in Temple's RC10 Tech Forum
    3 Replies
    529 Views
    Last post by jcwrks
  • Examples of why it's not feasible to injection mold yourself
    by mrlexan » » in R/C Off-Topic / Chit-Chat
    10 Replies
    1347 Views
    Last post by FasterLouder
  • Shinwa Rolling Road
    by dinglem » » in Vintage Electronics
    4 Replies
    1088 Views
    Last post by bluewormx
  • Shinwa Rolling Road Instructions
    by dinglem » » in Vintage Catalogs / Instruction Manuals
    0 Replies
    1033 Views
    Last post by dinglem
  • Big Jim is rolling over in his grave
    by Erich Reichert » » in Vintage Electronics
    5 Replies
    933 Views
    Last post by mikedealer
  • Dynamic Models Suspension Car Rolling Frame Kit #102
    by RC10resto » » in Other Makes/Models
    7 Replies
    1027 Views
    Last post by romulus22
  • who's on facebook
    by GJW » » in Off-Topic / Chit-Chat
    11 Replies
    824 Views
    Last post by GJW
  • ** RC10Talk on Facebook **
    by scr8p » » in Off-Topic / Chit-Chat
    26 Replies
    3294 Views
    Last post by Orange

Return to “RC10 Buggy Forum”

Who is online

Users browsing this forum: No User AvatarCommonCrawl [Bot], No User AvatarDotNetDotCom.org [Bot] and 3 guests