![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Idea :idea:](./images/smilies/icon_idea.gif)
![Idea :idea:](./images/smilies/icon_idea.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
This is the mid engine RC10 buggy
I got some front end DS parts ready as you can see
![Image](https://farm1.staticflickr.com/908/41593148652_965e9c317d_b.jpg)
Gathering some more parts..
![Image](https://farm1.staticflickr.com/879/40741324945_63aa22b848_b.jpg)
I Got the DS nose plate mounted but im not liking the steering linkage setup that came with this buggy. Im going to be replacing it with stock DS parts.
![Image](https://farm1.staticflickr.com/817/40741323675_43a0b1562a_b.jpg)
Front is taking shape...rear still in buggy form
![Image](https://farm1.staticflickr.com/839/40741322205_fb070058dd_b.jpg)
Steering setup replaced with an original DS setup.
![Image](https://farm1.staticflickr.com/822/27764277468_afcd5b84e4_b.jpg)
I'll be replacing most of the tierod ends with RPM versions.
[
![Image](https://farm1.staticflickr.com/814/39825136770_cc389a8eca_b.jpg)
Rear end of buggy getting converted
![Image](https://farm1.staticflickr.com/803/39825138680_ab811f6c7e_b.jpg)
Front and rear ends looking good
![Image](https://farm1.staticflickr.com/841/40741320095_d9fe7e882e_b.jpg)
![Image](https://farm1.staticflickr.com/823/26765205357_a3100d88cd_b.jpg)
![Image](https://farm1.staticflickr.com/815/40922711714_09cc55947c_b.jpg)
DS Shocks and front bumper mounted
![Image](https://farm1.staticflickr.com/855/40741308325_fd7c8b5c4f_b.jpg)
![Image](https://farm1.staticflickr.com/867/39825132020_6b545e7dbc_b.jpg)
![Image](https://farm1.staticflickr.com/879/39825124180_9776108922_b.jpg)
[
![Image](https://farm1.staticflickr.com/823/39825132890_9f1890aaf9_b.jpg)
The buggy had a custom support brace to secure the steering post and support the nose tubes. It was specific to the buggy and could not be used for the DS. Instead i used the buggy nose tubes and mounted them onto a set of aluminum blue anodized GT nose tube braces.
![Image](https://farm1.staticflickr.com/833/26765196347_0c1c9bb786_b.jpg)
![Image](https://farm1.staticflickr.com/789/41593127432_3b929af8d7_b.jpg)
![Image](https://farm1.staticflickr.com/929/41633195861_27e97c822d_b.jpg)
So this is where im at as far as the chassis. The nose tube braces are not secured to the chassis yet. There are a few issues i need to figure out before committing to drilling the chassis.
What do you think?
![Image](https://farm1.staticflickr.com/883/41593119782_b663cb69c9_b.jpg)