past participle, past tense of mod·ern·ize
Verb:
Adapt (something) to modern needs or habits, typically by installing modern equipment or adopting modern ideas or methods....
Last post
Thanks Scra8p, will just wait for it... happy Holidays guys!!!!!!
I'm buying one of these alu steering sets for my 10t:
It says it has 5x8 delrin bushes now would this mean i need 5x8x2.5 bearings to go in there as this is the only size i can find that matches on avidrc?
I can wait if needs be but need to put...
Last post
The only ones I seen is from MIP vintage stuff. I was using the stock ones on my RC10T Duratrax conversion until I seen these on Ebay.
I use an A&L steering and made a custom front adjustable bracket.
Just some of the options you can do.
I have an RC10T3 with the graphite body and was wondering if I can switch it out with a chassis from an RC10T tube? Is everything a direct bolt on? Thanks in advance. Hope you gents have a great Christmas.
Last post
Thanks for the insight Mark. Have a great day Bro.
I'm trying to figure out where I can buy the boxes that the batteries are placed in. I'd like to know where to uy them and what the dimensions are. Any help would be appreciated. Thanks guys
Last post
Ohhhhhhhh. I searched for rc10 and rc10t. Didn't think about the items for interest link though. Need to remember that. Thanks a lot. :D
I recently aquired an RC10T from ebay in great shape. It included a stock motor, Reedy DS Spec and a Futaba servo. I bought a Novac 610-RV ESC and a pair of 6-cell 3Kmah NiMh battery packs. The RC10T is geared 16/87 at the moment. I was curious as...
Last post
if your trying to get the most top speed out of it, you can't gear the thing like an offroad truck.
Just got me an RC10T3 in great shape,but requires an ESC and radio. Without breaking the bank, what do you folks recommend? Thanks for the input and by the way, great site. :D
Last post
Well forget my statement of my RC10T3 moving at 20-25 easily. I ran it with my Garmin GPS on it and it registered a whopping 17.9mph. I changed out the gears, motor was replaced with a Trinity Speed Gem 2(blue can). I'll check it tomorrow afternoon...
Does anyone make an ESC tray that mounts to the rear shock tower and allows the esc to sit upright as seen in many photos posted? Have not had any luck finding one.
Also, is there an aftermarket or another manufacturer's battery tray that will...
Last post
Thanks for the information. I will try to fabricate one myself from the above diagram.
Seeing how Rod's RC10 thread became a very useful thread to a lot of guys, and seeing how the 10T release was 1991 and it's almost 2011.............. I thought I would put together a 10T version of Rod's thread- Members that want to contribute...
Last post
Great idea Reg! You are the master of the T's! If you need any pictures, I have new ST,T2,T3 Team, T3FT and Early GT when I get my arms! :wink: :mrgreen: I also have a blue flat chassis type FTGT that I raced, a NIB Team T2, NIB Black GT and NIB...
Good afternoon all. I'm new to the forum my name is Nick. I have a RC10GT RTR that has been converted to brushless.
I'm in the process of finishing the build and I need some spur gear help.
I have plenty of spare spur gears but I'm looking for...
Last post
Here are a few more pictures of the truck and a picture of the gear hardware, it looks like something was rubbing. I just ordered all new parts last night.
Almost done with it, just waiting on some more parts and I need to finish the front...
I got this puppy last month off eBay. It is a little dirty, but I think it will clean up nice.
It appears all stock and it is just like the one I had when I got married in 1994.
As with the gold pan this will end up being a shelf queen....
Which white rear hub carriers would be more correct for a 10T...the chunky block-style, or the smooth rounded-style? I have both, but the original AE manual shows the block-style, while the exploded view and 10GT manual show the rounded-style. What...
Did the truck really NEED any improvements, especially for the non-racer?
honestly no. that truck/buggy had a great run for a good number of years. the transition from the b2 to the t3/b3's was minimal. even the b2 sport buggys were popular at...
so ive mainly owned traxxas cars and trucks and have just broadened my collection and have aquired a black pan rc10.. my question is how do you tell if its a truck or buggy? the guy i got it from said its a rc10t. however i am completly dumb to...
Last post
well i guess im carryin on with the creation of this truck only god knows what its gonna be lol
I just torn down the RC10T3 and it has a Reedy Motor labeled DE Spec Motor and the sticker is green. What exactly do I have? What ESC would work? Also, the gears are 87 and 17. I'll post a pic in a few. Thanks again.
Last post
It's probably a 27 turn stock motor, can't day for sure though.
This is my rc10gt sc conversion. Its almost finished, just waiting for the body to arrive in the mail. After putting everything together Im a little worried that its going to be too heavy! Im running a cv12 and I dont know if its going to be able to...
Last post
go to rcuniverse.com and search SC10GT in the forums. There is a pic of the kit and it shows the included pieces.
I have a t3 that has some beatup losi wheels. I purchased some new AE wheels and the installed axle drive pins are too long for the AE wheels! Anyone know where I can find a couple drive pins for AE wheels? I thought about cutting up a servo control...
Last post
i dont think you can use the original 3 piece truck wheels with those, but i may be wrong..i dont have any to test
What AE bodies anywhere from vintage RC10T to RC10T4.1 fit a vintage RC10T?
I have a vintage RC10T roller that I need a body for, my local hobby shop has a newer AE body, I'm just not sure from what year though. I'll have to go back and look.
Lynn
Last post
Yes Associated has them on there site 18 bucks or so. Dont know if they come with decals/graphics. I was going to order one but sent an Email asking if they had the decals for them too. I mainly want the grill, headlights, and associated stickers....
I was wondering what it takes to rebuild these shocks. I have not had them apart, but they seem to have leaked over time. The manual shows two orings per shock. I was wondering if you can use any oring of the same size or do you have to buy a...
I have had this thing since brand new in 91-92.I have been collecting parts for the last month or two to build this one into a runner.Upon finding this site and doing some research I realized that some of the parts I have and that are on it are...
Last post
that sounds easy enough!! looks like i have a new project lol thanx for the info everyone!!!
My father bought my brother and I these about 20 years ago when they first came out, we spent alot of time building our trucks and learned alot. I used it casually on and off for 7 years or so probably. I have since decided to pull it out of the...
Last post
The nice thing about the 10T is that the 10T2 and the GT shared the same geometry arms and the GT was in production until just a few years ago. The parts were a little different structurally but everything else is the same. If you broke almost...
Hi guys. I stumbled on this site after trying to research my 10T. I use the term Barn Fresh , for those not familiar to the term, it basically means something that has been stored and hidden for years--sometimes almost forgotton about, then brought...
Last post
I have no idea how far I will get into this build, LOL. Appreciate the offer on the motor, PM sent.
I may (probably will) switch to LiPo, but not right now, I want to get both my trucks looking they way I want then I will add speed later as I get...
I am wanting to turn one of my RC10T's into an oval truck. I have no clue as to what parts it takes to convert. Looking for help in getting started and straightened out on what assoicated parts are needed and what parts from other associated trucks...
Last post
Which threaded shock set will you be starting with? From what I can tell, the VCS and VCS2 shocks are the on-road ones, and the V2 shocks are the new off-road shocks. It doesn't look like they make the V2 shocks shorter than the .89 B4 fronts. These...
Looking at pictures I see some have mounted their battery along the chassis instead of sideways like it says in the manual. Pro's and con's of either way of doing it?
Last post
Bingo, that would be it. My truck came with a msc and all of the pictures I have seen of the battery mounted mounted lenght wise have esc's.
this started in buggy section but decided to make it a truck, still waiting on the nose plate and some other parts
heres what i got so far
Last post
I know of a guy that will plate that chassis for ya in 24K gold. Pretty cheap - maybe $50 or so (I think). The only trick is you need to chrome plate it first before the gold can be applied (not sure why, but that's what he said). I was going to...
Im sure this has been covered and answered many times. I did several searches to no avail. What are the basic differences? You dont need to tell me all the things covering all the generations etc, just the basics. Thanks.
Hello all, I am putting a runner together and taking all the stock white parts off to be able to build a shelfer after the runner build.Question is I read somewhere here that white spur gears are hard to find.Is this true? I have 4 or 5 here and...
Last post
Thanks or the info.I have a few of those combos so I just ordered some new ones in black.
Hello to all,
I got a question I,m doing a restore on a old school GT. I picked up a set of front and rear white a-arms there in new condition other then because of the age the white is kind of yellow looking is there anyway to make them look white...
Last post
Wow thats great I knew I've come to the right place! Thank you.
the arms don't have anything to do with the toe. it's the arm mounts and hub carrier.
i kinda think the 10t came with 1.5 arm mounts and 3 degree hubs. 4.5 total. 0 degreee rear hubs are still available. get a pair of them and you'll be down to 1.5...
Is it just me or is there a lot of slop in the 10t steering? Have just got my runner up together for the start of the vintage class at my local club and it seems no end of shims spacers etc will sort it out!
Any recommendations, or is there another...
This was listed on Ebay as T2. It is not as I am comparing to to a T2 I just scored as well. It is also not the same as my B4.1 but the chassis recessed part is about the same size and shape as that, rectangular vs. hole in the T2 chassis which is...
Last post
Is there an advantage to using a T3/B3 setup in a 10T gear case? Would it fit?
it won't fit.
It is a B stamp chassis that has been drilled and stripped. The thing that made me want it was the turnbuckles and the RPM stuff(arms,bumper and trans case all in white).I plan on stripping it and cleanining it and maybe re-anodizing the...
Last post
I was going to start breaking down the truck to start cleaning. Then I started messing with all my spare parts and built a whole buggy. :lol: :lol: :lol: I'll post pix later it should be another good project.
I just got a brand new never assembled 10t at a garage sale. The only problem is the guy took everything out of the bags. Luckily everything was there except one of the front wheel nuts. The guy (the one who knows his stuff) at the hobby store...
Last post
It's a 5-40 size nut. Like aconsola said, you can also use the nylon nuts and make it fit. Either way works well.
Must be that time to run something new, Ruffy's thread inspired me.
I too am heading racing with my T4.1 for the first time in a long long time this weekend. It is pretty much out of the box RTR but will have a selection of tires. Last time I...
Last post
It's been a long time and it was a lot of fun.
Good deal. Just IMHO this is what its all about.
Todd
What Brushless could i run in my rc10t without the slipper melting?
I've got an ez run 8.5t or the RTR brushless out of my B4.1 just dont want anything bad to happen!
On the hunt for parts to do the topshaft conversion so i wont have this problem...
Last post
Was just thinking about asking the same question, the gearbox is fitted with the b4 slipper and topshaft gonna try my b4.1 stock brushless in it first then try the 8.5 ezrun. i have a feeling she will fly!
Hi guys I recently discovered the vintage side of rc. I have 4 rc10ts and 1 rc10t2 in various stages of resto. Myfriend JK racing told me about the site and is giving me grief because I use to ask him all the time why are you messing around with...
Last post
Welcome rusty-racing! looks like you will fit in well with the rest of the vintage addicts here. We will be looking at how you spend the rest of your free money from here on out :P
What other trucks came stock with 1/4 axles and carriers that will work with the RC10T? Are the others, such as the T3, T4 all 3/16 axles? Is it worth converting to the 3/16 axles because parts seem to be easier to find.
It's been sitting for a while and I purchased a Mamba Max for it brushless system and it runs great, now however when I put the truck down on the ground it seems to barely go at...
Last post
Then, your other possibilities are-
1) split wheel on either side allowing the axel to spin inside the wheel it should be turning
2) missing or broken drive pin
3) spit slipper pin
4) glazed slipper pads
5) incorrect slipper arrangement
I got a 10T coming in with a bunch of crusty white rpm parts on it. What is the best way to clean these parts? I know the peroxide bath is out of the question. Any and all ideas would be appreciated.
Last post
I use a solution of warm water and clorox kitchen/bath cleaner...very diluted. And a ton of elbow grease...
I need a little technical guidance on an oval truck project I’m planning. I would imagine scr8p is tired of my pms for technical advice so I figured I would put this out to everyone. I had planned on basically taking the buggy(truck I guess if you...
Last post
Hit up PBA Allstar when it comes to setup for that bad boy, IIRC he knows his stuff with ovals.
The trucks I've seen of his are sick. I almost didn't even want to make an oval truck because they will pale in comparison to his. Then again, if I...
I've been going through my stash of spare parts I have, and after I get my 10T restored, I was thinking of an idea. I want to build something to have fun at the vintage races (VONATS, or any other future gatherings that may generate here) I have...
Last post
Yeah, I've decided to do the same things in my first post, but apply it to the T2. I now have several of these, and as much as I liked driving the 10T, when the T2 came out, it did handle better. Putting a little updating to the chassis will be fun!...
Hi guys, just thought I should introduce myself.
My name is John and I have been into RC on and off for over 20 years. My first REAL RC car was an RC10 gold pan that i bought used in 1990.
These days I am more into the nitro vehicles and have owned...
Last post
Looks great, welcome to the forum! Neat sprint conversion!
I raced GT's back in the day. Got one of mine geared with DS gears, clocked with police radar over 70mph! :shock: When a gust of wind takes it at that speed, it's fly time baby! :lol: We...
Got this truck from Noony, Thanks man, The pan is painted with a ceramic paint (pour mans powder coat lol), I forgot to bead blast the motor mount so i still have to finish that part. The wheels are gunmetal, Im not sure what to do with this truck....
Ok so i got this from the Bay, I know i paid to much but its a bad habit of mine, I cant figure out what version it is, It is a team truck with sport axles or a sport truck with team items? I will hand the fiat of this 10t to the experts :)
Just getting started on this project . I have a few things coming my way for my first RC10T. I just recieved a mrlexan body and a pricey decal sheet from ebay. So far so good.
Users browsing this forum: Amazon [Bot], Google [Bot] and 1 guest
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum